Chemometrics in assessment of seasonal variation of water quality in fresh water systems

The spatial and temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in Gomti River, a major tributary of the Ganga river (India). A total of 96 samples (water and sediments) were collected from eight different sites over a period of 2 years and analysed for 16 PAHs. The total concentrations of 16 PAHs in water and bed sediments ranged between 0.06 and 84.21 ??g/L (average (n?=?48), 10.33 ± 19.94 ??g/L) and 5.24?C3,722.87 ng/g dw [average (n?=?48): 697.25 ± 1,005.23 ng/g dw], respectively. In water, two- and three-ring PAHs and, in sediments, the three- and four-ring PAHs were the dominant species. The ratios of anthracene (An)/An + phenenthrene and fluoranthene (Fla)/Fla + pyrene were calculated to evaluate the possible sources of PAHs. These ratios reflected a pattern of pyrolytic input as a major source of PAHs in the river. Principal component analysis, further, separated the PAHs sources in the river sediments, suggesting that both the pyrolytic and petrogenic sources are contributing to the PAHs burden. The threat to biota of the river due to PAHs contamination was assessed using effect range low and effect range median values, and the results suggested that sediment at some occasions may pose biological impairment.     

Translating habitat class to land cover to map area of habitat of terrestrial vertebrates

Area of habitat (AOH) is defined as the “habitat available to a species, that is, habitat within its range” and is calculated by subtracting areas of unsuitable land cover and elevation from the range. The International Union for the Conservation of Nature (IUCN) Habitats Classification Scheme provides information on species habitat associations, and typically unvalidated expert opinion is used to match habitat to land-cover classes, which generates a source of uncertainty in AOH maps. We developed a data-driven method to translate IUCN habitat classes to land cover based on point locality data for 6986 species of terrestrial mammals, birds, amphibians, and reptiles. We extracted the land-cover class at each point locality and matched it to the IUCN habitat class or classes assigned to each species occurring there. Then, we modeled each land-cover class as a function of IUCN habitat with (SSG, using) logistic regression models. The resulting odds ratios were used to assess the strength of the association between each habitat and land-cover class. We then compared the performance of our data-driven model with those from a published translation table based on expert knowledge. We calculated the association between habitat classes and land-cover classes as a continuous variable, but to map AOH as binary presence or absence, it was necessary to apply a threshold of association. This threshold can be chosen by the user according to the required balance between omission and commission errors. Some habitats (e.g., forest and desert) were assigned to land-cover classes with more confidence than others (e.g., wetlands and artificial). The data-driven translation model and expert knowledge performed equally well, but the model provided greater standardization, objectivity, and repeatability. Furthermore, our approach allowed greater flexibility in the use of the results and uncertainty to be quantified. Our model can be modified for regional examinations and different taxonomic groups.     

Active biomonitoring with wet and dry moss: a case study in an urban area

Active biomonitoring of the air quality in Belgrade, Serbia, was performed using the moss Sphagnum girgensohnii. Moss bags were exposed in parallel with and without irrigation for 3 and 6 months, respectively, at three different sites. Twenty-nine elements were determined in the exposed moss samples by INAA. For all exposure periods, higher uptake in the irrigated moss bags was evident for Al, Cr, Fe, Zn and Sr. Elements such as Cl, K, Rb and Cs were depleted in the moss tissue during the time of exposure. For most of the elements the accumulation after 6 months exceeded that observed after 3 months.     

Chemical and biological extraction of metals present in E waste: A hybrid technology

Management of metal pollution associated with E-waste is widespread across the globe. Currently used techniques for the extraction of metals from E-waste by using either chemical or biological leaching have their own limitations. Chemical leaching is much rapid and efficient but has its own environmental consequences, even the future prospects of associated nanoremediation are also uncertain. Biological leaching on the other hand is comparatively a cost effective technique but at the same moment it is time consuming and the complete recovery of the metal, alone by biological leaching is not possible in most of the cases. The current review addresses the individual issues related to chemical and biological extraction techniques and proposes a hybrid-methodology which incorporates both, along with safer chemicals and compatible microbes for better and efficient extraction of metals from the E-waste.     

Pre-concentration and separation of heavy metal ions by chemically modified waste paper gel

Iminodiacetic acid was immobilized on waste paper by chemical modification in order to develop a new type of adsorption gel for heavy metal ions. Adsorption behavior of the gel was investigated for a number of metal ions, specifically Cu(II), Pb(II), Fe(III), Ni(II), Cd(II), and Co(II) at acidic pH. From batch adsorption tests, the order of selectivity was found to be as follows: Cu(II)  Fe(III) > Pb(II) > Ni(II)  Co(II) > Cd(II). Column tests were carried out for pairs of metal ions to understand the separation and pre-concentration behavior of the gel. It was found that mutual separation of Ni(II) from Co(II) and that of Pb(II) from Cd(II) can be achieved at pH 3. Similarly, selective separation of Cu(II) from Cu(II)–Fe(III) and Cu(II)–Pb(II) mixtures at pH 1.5 and 2, respectively, was observed by using this new adsorption gel. In all cases, almost complete recovery of the adsorbed metal was confirmed by elution tests with HCl.     

Study on the removal of NOx from simulated flue gas using acidic NaClO2 solution

The study on the removal of NOx from simulated flue gas has been carded out in a lab-scale bubbling reactor using acidic solutions of sodium chlorite. Experiments were performed at various pH values and inlet NO concentrations in the absence or presence of SO2 gas at 45℃. The effect of SO2 on NO oxidation and NO2 absorption was critically examined. The oxidative ability of sodium chlorite was investigated at different pH values and it was found to be a better oxidant at a pH less than 4. In acidic medium, sodium chlorite decomposed into C102 gas, which is believed to participate in NO oxidation as well as in NO2 absorption. A plausible NOx removal mechanism using acidic sodium chlorite solution has been postulated. A maximum NOx removal efficiency of about 81% has been achieved.     

Atmospheric depositions around a heavily industrialized area in a seasonally dry tropical environment of India

Clear and through-fall bulk depositions were collected in the downwind of a highly industrialized region in Sonbhadra district of India to estimate the influence of anthropogenic activities on chemical composition of depositions. Significant spatial and temporal variations in depositions of cations and anions were observed. Depositions were higher near the thermal power stations and coal mines as compared to distantly situated site. Seasonally summer samples showed maximum cation and anion depositions followed by winter and minimum in rainy season. The mean pH of the depositions indicates that rainfall in the area is alkaline. Among the anions, maximum deposition was recorded for SO4(2-) followed by NO3- and minimum for Cl-. Among the cations, Ca2+ deposition was maximum followed by NH4+. Na+, K+ and Mg2+ deposition rates showed more or less similar values. The depositions of cations and anions as well as pH were higher in through-fall than clear-fall samples. Results of the present study suggest that atmospheric depositions are strongly modified due to thermal power stations and coal mines in the area.     

Bottled water: how safe is it?

Sales of bottled water have increased dramatically in recent years, with worldwide sales of more than dollars 35 billion, largely because of the public perception of purity and safety and public concern about the quality of tap water. Presently, there are no Food and Drug Administration (Washington, D.C.) recommendations regarding temperature and duration of storage for bottled water once it is opened and used. The objectives of this study were to examine the effects of time and storage temperature on bacterial growth and characterize the types of microorganisms contaminating bottled water after drinking once from the bottle. Bottled and tap water were tested using standard microbiology culture techniques. The bacterial count in bottled water increased dramatically, from less than 1 colony per milliliter (col/mL) to 38,000 col/mL over 48 hours of storage at 37 degrees C. Bacterial growth was markedly reduced at cold temperatures (refrigeration) compared with room temperature, with 50% fewer bacterial colonies in 24 hours and 84% fewer colonies in 48 hours. Interestingly, tap water resulted in only minimal growth, especially at cold temperatures (< 100 col/mL at 48 hours). These findings may be useful to increase public awareness and development of guidelines on storage temperature and expiration time for bottled water once it is opened and used.     

Effect of agricultural antibiotics on the persistence and transformation of 17beta-estradiol in a Sequatchie loam

A laboratory incubation study was conducted to investigate the effect of agricultural antibiotics (sulfamethazine, tylosin, and chlortetracycline) on the persistence and transformation of 17beta-estradiol in Sequatchie loam. We measured concentrations of 17beta-estradiol and its primary metabolite (estrone) in soils spiked with antibiotics and 17beta-estradiol. Dehydrogenase activity (DHA) was also measured as an indicator of the total microbial activity of the soils. The presence of antibiotics significantly decreased transformation of 17beta-estradiol to estrone. There was a positive correlation between the DHA and the concentrations of estrone in soil spiked with 17beta-estradiol only, implying that the reaction is mainly catalyzed by dehydrogenases. However, the positive correlation was weakened in soil spiked with 17beta-estradiol and antibiotics together. We recommend that any study evaluating the fate and transport of estrogenic hormones in soil should include the effect of agricultural antibiotics because antibiotics and estrogenic hormones are commonly excreted together in environmental samples.     

Characteristics of microbial community functional structure of a biological coking wastewater treatment system

Nitrogenous heterocyclic compounds are key pollutants in coking wastewater; however, the functional potential of microbial communities for biodegradation of such contaminants during biological treatment is still elusive. Herein, a high throughput functional gene array (GeoChip 5.0) in combination with Illumina HiSeq2500 sequencing was used to compare and characterize the microbial community functional structure in a long run (500 days) bench scale bioreactor treating coking wastewater, with a control system treating synthetic wastewater. Despite the inhibitory toxic pollutants, GeoChip 5.0 detected almost all key functional gene (average 61,940 genes) categories in the coking wastewater sludge. With higher abundance, aromatic ring cleavage dioxygenase genes including multi ring1,2diox; one ring2,3diox; catechol represented significant functional potential for degradation of aromatic pollutants which was further confirmed by Illumina HiSeq2500 analysis results. Response ratio analysis revealed that three nitrogenous compound degrading genes- nbzA (nitro-aromatics), tdnB (aniline), and scnABC (thiocyanate) were unique for coking wastewater treatment, which might be strong cause to increase ammonia level during the aerobic process. Additionally, HiSeq2500 elucidated carbozole and isoquinoline degradation genes in the system. These findings expanded our understanding on functional potential of microbial communities to remove organic nitrogenous pollutants; hence it will be useful in optimization strategies for biological treatment of coking wastewater.