Phytoremediation of radiostrontium ((90)Sr) and radiocesium ((137)Cs) using giant milky weed (Calotropis gigantea R.Br.) plants

Potential of plants to remove radionuclides/toxic elements from soils and solutions can be successfully applied for removal of important radionuclides such as strontium-90 (⁹⁰Sr) and cesium-137 (¹³⁷Cs). When uptake of ¹³⁷Cs and ⁹⁰Sr by Calotropis gigantea plants incubated in distilled water spiked with the radionuclides either alone or in combination was studied, it was found to have a high efficiency for the removal of ⁹⁰Sr, with 90% being removed from solutions (5 × 10³ kBq l⁻¹) within 24 h of incubation. However, in case of ¹³⁷Cs, about 44% could be removed from solutions (5 × 10³ kBq l⁻¹) at the end of 168 h of incubation. Accumulation of ⁹⁰Sr and ¹³⁷Cs was higher in roots compared to shoots. The plants could remediate both ⁹⁰Sr and ¹³⁷Cs when they were added together to the solution. When two months old plants were incubated in low level nuclear waste, 99% of activity disappeared at the end of 15 days. The present study suggests that C. gigantea could be used as a potential candidate plant for phytoremediation of ⁹⁰Sr and ¹³⁷Cs.     

Determination of total arsenic content in water by atomic absorption spectroscopy (AAS) using vapour generation assembly (VGA)

Analysis of arsenic in water is important in view of contamination of ground water with arsenic in some parts of the world including West Bengal in India and neighboring country Bangladesh. WHO has fixed the threshold for arsenic in drinking water to 10ppb (microg/l) level, hence the methodology for determination of arsenic is required to be sensitive at ppb level. Atomic absorption spectrophotometry with vapour generation assembly (AAS-VGA) is well known technique for the trace analysis of arsenic. However, total arsenic analysis [As(III)+As(V)] is very crucial and it requires reduction of As(V) to As(III) for correct analysis. As(III) is reduced to AsH3 vapours and finally to free As atoms, which are responsible for absorption signal in AAS. To accomplish this the vapour generation assembly attached to AAS has acid channel filled with 10 M HCl and the reduction channel with sodium borohydride. Further sample can be reduced either before aspiration for analysis, using potassium iodide (KI) or the sample can be introduced in the instrument directly and KI can be added in the reduction channel along with the sodium borohydride. The present work shows that samples prepared in 3 M HCl can be reduced with KI for 30 min before introduction in the instrument. Alternatively samples can be prepared in 6 M HCl and directly aspirated in AAS using KI in VGA reduction channel. The latter methodology is more useful when the sample size is large and time cycle is difficult to maintain. It is observed that the acid concentration of the sample in both the situations plays an important role. Further reduction in acid concentration and analysis time is achieved for the arsenic analysis by using modified method. Analysis in both the methods is sensitive at ppb level.     

Determination of atmospheric heavy metals using two lichen species in Katni and Rewa cities, India

A biomonitoring study was conducted to assess the levels of atmospheric heavy metal pollution in Katni and Rewa cities of Madhya Pradesh, state in central India. The Pyxine cocoes and Phaeophyscia hispidula, two epiphytic foliose lichen were used as bioindicators in the present study and seven metals (As, Al, Cd, Cr, Fe, Zn, Pb) were analyzed in naturally growing thallus. The concentrations of these metals was observed to be in higher range as maximum values of Al, Cd, Cr and Zn were reported from the lichen samples from Rewa city which was 561.8 +/- 2.4, 6.8 +/- 0.8, 35.2 +/- 1.4, 214.6 +/- 2.0 microg g(-1) dry weight respectively. Whereas As, Fe and Pb were reported maximum in the lichen samples collected from Katni city areas with 33.4 +/- 0.05, 689.4 +/- 2.6, 13.3 +/- 0.5 microg g(-1) dry weight respectively. However the accumulation of Cd and Pb from both the cities are more or less similar in concentration. The selectivity sequence of metals were Fe>Al>Zn>As>Cr>Pb>Cd in Katni city, and Al>Fe>Zn>Cr>As>Pb>Cd in Rewa city. The findings of this study indicates that extent of heavy metal pollution in the atmosphere of the two cities which may lead to adverse health affects.     

Effects of solar geometry and operation period on stability of solar desalination systems: a review

Environmental Science and Pollution Research - The sun is the primary source of life on the earth. The heating effect of the sun provides a more fruitful environment for mankind. In addition, solar...     

Exposure profiles of mercury in human hair at a terai belt of North India

Human hair is frequently used as a bioindicator of mercury exposure. Mercury (Hg) has for centuries been a useful metal in a variety of applications. Unfortunately, this usefulness is counterbalanced by its neurotoxicological health impact. The US Environmental Protection Agency recommends keeping the hair Hg level <1.0 µg/g. Therefore, an investigation has been performed in order to ascertain the hair Hg levels among the people living at the terai belt of North India. Hair samples were collected from 111 individuals and were placed in an identified plastic bag, stapled to prevent the shift of the hair strand. Samples were analyzed by combustion, gold amalgamation, atomic absorption spectrometry (C-GA-AAS). The mean Hg level in hair was 0.28 µg/g for the whole group ranging from 0.0012 to 1.9091 µg/g. The mean hair Hg levels were 0.16 µg/g for men and 0.12 µg/g for women, indicating that men had higher hair Hg levels than women. Total hair Hg was found to be significantly associated with age, gender and fish consumption frequency. 98 % of the total sample had hair Hg concentrations less than 1.0 µg/g, i.e, within safe dose, whereas only 2 % had Hg concentrations greater than 1.0 µg/g, thereby exceeding the safe dose.

     

Lichens reveal air PAH fractionation in the Himalaya

This paper shows that gas/particulate phase partitioning of polycyclic aromatic hydrocarbons (PAHs) can be monitored using lichens. Anthropogenic sources are responsible for the release of PAHs, which are bioaccumulated in plants at various spatial scales based on their physicochemical properties. Atmospheric PAHs are distributed both in the gaseous and particulate states. Here, a lichen species, Dermatocarpon vellereum Zschacke, has been collected at different altitudes in and around the Rudraprayag valley, located in Central Himalayan region of India, in order to study the spatial distribution of PAHs in the valley. Results show that PAH concentration ranged from 0.136 to 4.96 μg g^?1. Findings reveal that the bioaccumulation of 2- and 3-ringed PAHs was higher in high-altitude samples, whereas bioaccumulation of fluoranthene, a 4-ringed PAH, showed higher concentration in samples from localities away from town centre. 5- and 6-ring PAHs were then confined to the lower altitude at the base of the valley, thus justifying their particulate-bound nature. This is the first report showing the utility of lichen to biomonitor PAHs in the Himalayan ecosystem.     

Lichens to distinguish urban from industrial PAHs

This paper shows that lichens can be used as biomonitors to distinguish urban from industrial polycyclic aromatic hydrocarbons (PAHs). PAHs are atmospheric pollutants originating mainly from incomplete combustion of fuels in vehicles and industry. The occurrence of PAHs in air is a serious health issue in urban areas and industrial areas because some PAHs are carcinogenic. Biomonitoring PAHs with lichens is generally applied for quantification of PAHs. However, the precise sources of PAHs are not well known. Here we use lichen to trace the source of PAHs. PAHs were analyzed in Pyxine subcinerea Stirton, a lichen species collected from twelve sites which vary from urban and industrial to periurban forest area of Haridwar, in the foothills of the Indian Himalayas. Total PAH concentration ranged between 1.25 and 187.3 μg g⁻¹. Results indicate a clear distinction between urban and industrial PAHs profile, using principal component analysis. Lichen sampled from industrial sites exhibited higher concentrations of two-, five-, and six-ringed PAHs, up to 60% of total PAHs, while samples from urban sites were dominated by four-ringed PAHs, predominantly fluoranthene and acenaphthylene. Molecular ratios indicate that combustion was the dominant source of origin of PAHs in industrial area, while urban sites showed mixed origin of PAHs, both pyro- and petrogenic.     

Saint Lucia's experience with formulating a national sustainable development strategy

In response to domestic development challenges and calls from the international community for countries to develop and begin the implementation of national sustainable development strategies by 2005, the Government of Saint Lucia initiated a project named Integrated Planning for Sustainable National Development in 2002. Under this initiative, it was intended to articulate a vision for the country's development and use this as the basis for identifying a set of development imperatives through a process that will superimpose identified national development goals and targets on the international sustainable development agenda to arrive at a national strategy and plan for sustainable development. The plan also called for institutional and structural adjustments to move the country away from current sectoral‐based development planning to an environment of dialogue, cooperation and collaboration among development partners in the articulation of development policies, plans and projects. The initiative did not evolve as planned mainly due to inadequate political and financial support and the inability of key institutions to see the bigger picture this initiative tried to paint for the nation.