Effectiveness of gutter brushes in removing street sweeping waste

Litter on roadways has to be removed for hygiene and to reduce pollution, amongst other reasons. Therefore, the effective operation of street sweepers is important in the collection of solid waste. In this article, the effectiveness of gutter brushes of street sweepers in removing different debris types, namely medium-size gravel, small and fine particles, and wet thin debris is studied by means of sweeping tests using a brushing test rig. Two types of gutter brushes, cutting and F128, are tested under a variety of operating conditions. The experimental tests provide a means of identifying suitable ranges of brush penetration for the different debris types under defined operating parameters such as brush angle of attack, brush rotational speed, and sweeper velocity. These ranges may provide sufficiently high removal forces and avoid the occurrence of sweeping problems such as backward sweeping and inappropriate bristle–surface contact. Optimum operating parameters for the three debris types studied, as well as a mixture of all of them, are determined. Lastly, the results indicate that, as far as the sweeping effectiveness is concerned, the F128 brush is the preferred one for the cases studied.     

Production of surfactin using pentose carbohydrate by Bacillus subtilis

Interest in microbial surfactants has been steadily increasing in recent years due to their diversity, mass production possibility, selectivity, performance under extreme conditions and potential applications in environmental protection. In this study two pentose sugars (xylose and arabinose) were investigated for the submerged fermentation (SmF) of Bacillus subtilis in surfactant production medium for bio-surfactant surfactin production. An excellent vegetative growth of B. subtilis (× 10¹⁰ CFU/mL) was observed for xylose and arabinose containing medium which were comparable to glucose supplemented medium. Low growth (× 10⁸ CFU/mL) was found when medium was not supplemented with any of the sugars. Surfactin production in xylose, arabinose and glucose containing medium was 2700, 2600 and 2000 mg/L, respectively, whereas, medium without any sugar showed low surfactin (700 mg/L) production. These results clearly indicate the effect of pentose sugars on production of surfactin. Gradual depletion of the xylose and arabinose were confirmed by HPLC analysis during the growth phase of the strain that ultimately produced the surfactin.     

Comparative diversity and heavy metal biosorption of myxomycetes from forest patches on ultramafic and volcanic soils

Ultramafic and volcanic soils are exploited for industrial activities such as mining due to their high metal content, thus it is important that species in these areas are documented before irreversible environmental damage sets in. In this study, aerial and ground leaf litter, dead vines and twigs from six forest patches on volcanic and ultramafic soils in the provinces of Bataan, Pangasinan and Zambales in the Philippines were cultured in moist chambers (MC) and assessed for myxomycete diversity. From the 77% positive MC for myxomycetes, a total of 40 species from 14 genera were identified. Despite the higher heavy metal content, forest patches on ultramafic soils had greater species diversity as compared to volcanic soils. In this study, 10 species were abundant in both forest patches, namely Arcyria cinerea, Diachea leucopodia, Diderma effusum, D. hemisphaericum, Didymium ochroideum, Perichaena chrysosperma, P. corticalis, P. depressa, P. dictyonema and Physarum melleum. Selected myxomycetes tested for Cr and Mn content had equal or higher heavy metal levels than that of their leaf substrate. The study hypothesised that the presence of Mn⁷⁺ in fruiting bodies of myxomycetes was due to the phagocytosis of food bacteria inhabiting the substrates on the forest soil laden with heavy metal.     

The consequences and policy implications of urban encroachment into flood-risk areas: the case of Ibadan

Urban encroachment on floodplains has exacerbated flood disasters owing to the reduction in the floodplain’s capacity to mitigate flooding, thereby bringing more settlements and people at flood risk. This study examined the consequences and policy implications of urban encroachment into Ibadan’s flood-risk areas. The survey-based study relied on primary and secondary data, with multistage sampling procedures selecting 15% of the flood-affected buildings in 2011, from which a structured questionnaire was administered to 402 households. The study revealed that the institutional arrangements with respect to responsibilities, regulations and control of urban floodplains were fragmented and non-participatory. At least 62% of all the affected buildings encroached into the statutory setbacks to rivers. Household property lost/damaged included domestic goods (75%), domestic animals and pets (60%), working instruments/machines (31%), the source of domestic water (34%) and vehicles (29%). Strong direct correlations were found between the urban and peri-urban communities in (1) the number of damaged/lost property and (2) the number of households that suffered health-related challenges. The paper recommends that the overall co-ordination of flood management activities be entrusted to an institution that can assume responsibility for legal, technical, administrative and financial matters related to urban planning and flood-risk management.     

Building contraventions and incidence of flood in the Lagos Metropolis,Nigeria

Frequent floods have led to loss of lives and destruction of property in both coastal and landlocked cities across the globe, particularly where floodplains have been developed without recourse to space standards. This paper investigated the contributions of contravention of building codes to flooding in flood-prone areas in the Lagos metropolis. Global Positioning Systems (GPSs) were used to determine the location and elevation above sea level of 1,025 buildings situated in 211 streets that were prone to flooding. The distance of buildings from drainage channels/the lagoon was determined in ArcGIS 10.2 environment. Findings revealed that building code contravention contributed significantly to flooding (r = 0.926). About 63.5% and 63.3% of sampled buildings contravened building-plot ratio and statutory setbacks from drainage channels/the lagoon, respectively. Proactive urban planning, strict enforcement of building codes and development control regulations are required to reduce flooding and its consequences in cities of developing nations where flooding has become an annual occurrence.     

Analysis of air pollution at Shuaiba industrial area in Kuwait

A study has been conducted over a period of one year on measurements of air pollution in the Shuaiba Industrial Area (SIA) of Kuwait. The study included analysis of pollutant behaviour relative to the wind speed and direction. SIA comprises several large scale industries including three petroleum refineries, two power plants, two fertilizer plants, a cement plant, a chlorine and soda plant, a commercial harbour and two large oil loading terminals. Measurements of 15 parameters have been carried out every 5 minutes using a mobile laboratory fitted with an automatic calibrator and a data storage system. The pollutants studied include methane, non‐methane hydrocarbons (NMHC), carbon monoxide, carbon dioxide, nitrogen oxides (NO, NO₂, and NO _x ), sulphur dioxide, ozone and suspended dust. Meteorological parameters monitored simultaneously include wind speed and direction, air temperature, relative humidity, solar radiation, and barometric pressure. The air quality data collected using the mobile laboratory have been used to calculate the diurnal and monthly variations in the major primary and secondary pollutants. Distribution levels of these pollutants relative to wind direction and speed have also been used in the analysis. The results show large diurnal variations in some pollutant concentrations. Generally, two types of concentration variations have been found, depending on whether the species is a primary or a secondary pollutant. Diurnal variations with two maxima were observed in the concentrations of primary pollutants including NO, SO₂, NMHC, CO and suspended dust, whereas a single maximum was observed for secondary pollutants such as O₃and NO₂. The monthly variations of SO₂and NO _x showed maximum values during the warm months. However, ozone showed a quite marked seasonal variation with maxima during spring and late summer and a minimum during the early summer. The results also indicated a common source for NO _x , SO₂, NMHC, CO and suspended dust to the North‐West (NW) of the monitoring station. Moreover for NO _x and SO₂, another less significant source is to the South‐South‐West (SSW) and South‐West (SW) of the monitoring station.     

Simultaneous removal of Congo red and cadmium(II) from aqueous solutions using graphene oxide–silica composite as a multifunctional adsorbent

Graphene oxide is a very high capacity adsorbent due to its functional groups and π?π interactions with other compounds. Adsorption capacity of graphene oxide, however, can be further enhanced by having synergistic effects through the use of mixed-matrix composite. In this study, silica-decorated graphene oxide (SGO) was used as a high-efficiency adsorbent to remove Congo red (CR) and Cadmium (II) from aqueous solutions. The effects of solution initial concentration (20 to 120 mg/l), solution pH (pH 2 to 7), adsorption duration (0 to 140 min) and temperature (298 to 323 K) were measured in order to optimize the adsorption conditions using the SGO adsorbent. Morphological analysis indicated that the silica nanoparticles could be dispersed uniformly on the graphene oxide surfaces. The maximum capacities of adsorbent for effective removal of Cd (II) and CR were 43.45 and 333.33 mg/g based on Freundlich and Langmuir isotherms, respectively. Langmuir and Freundlich isotherms displayed the highest values of Q_max for CR and Cd (II) adsorption in this study, which indicated monolayer adsorption of CR and multilayer adsorption of Cd (II) onto the SGO, respectively. Thermodynamic study showed that the enthalpy (ΔH) and Gibbs free energy(ΔG) values of the adsorption process for both pollutants were negative, suggesting that the process was spontaneous and exothermic in nature. This study showed active sites of SGO (π-π, hydroxyl, carboxyl, ketone, silane-based functional groups) contributed to an enormous enhancement in simultaneous removal of CR and Cd (II) from an aqueous solution, Therefore, SGO can be considered as a promising adsorbent for future water pollution control and removal of hazardous materials from aqueous solutions.     

Disassemblability of end-of-life vehicle: a critical review of evaluation methods

Environmental sustainability has become the main items of contest in the automotive industries. Therefore in the order to reduce the environmental impact of end-of-life vehicles, European Union, Japan, USA, and Australia laws require manufacturers to take back their products at the end of their useful life and recycle them. In order to enhance the recycling rate of the vehicle, disassemblability of the automotive components has been a major concern. In the chain of end-of-life, except for landfill and incineration, components of economic value destined for reuse, remanufacture, or recycling have first to be disassembled from the end-of-life vehicles. There are several efforts within the academic community to rationalise design for disassembly and recycling, and several attempts by industry to study these issues in the context of specific products. Recent publications offer a broad perspective on recyclability and disassemblability. It is therefore necessary to determine the optimal stage of disassembly, when all economically valuable components are retrieved. This paper presents a review of several disassemblability methods, including spread sheet-like chart, end-of-life value and time for disassembly. The review concludes on the need for an effective disassembly method in order to enhance the recovery of products.