Components of the Total Water Balance of an Urban Catchment

A daily model was used to quantify the components of the total urban water balance of the Curtin catchment, Canberra, Australia. For this catchment, the mean annual rainfall was found to be three times greater than imported potable water, and the sum of the output from the separate stormwater and wastewater systems exceeded the input of imported potable water by some 50%. Seasonal and annual variations in climate exert a very strong influence over the relative magnitude of the water balance components; this needs to be accounted for when assessing the potential for utilizing stormwater and wastewater within an urban catchment.     

Repeated trans-Arctic invasions in littoral bivalves: molecular zoogeography of the<Emphasis Type="Italic"> Macoma balthica</Emphasis> complex

From a geographical survey of allozyme variation, a history of repeated trans-Arctic invasions since the Plio-Pleistocene is suggested for circumboreal bivalves of the Macoma balthica complex. A principal genetic subdivision, involving several nearly diagnostic loci and Nei's distance D=0.6, distinguishes the clams of the NE Pacific from those of the NE Atlantic. The Pacific taxon is however also present in Europe, in disjunct isolates in the Baltic Sea and White Sea basins. Nevertheless, these populations have marked Atlantic introgressive elements in their gene pools (ca. 30%). Two further population types are recognized, one in the St. Lawrence estuary, Quebec, the other in Varangerfjorden, NE Norway; the latter appears a mixture of Pacific and Atlantic components in almost equal proportions, in local genetic equilibrium (a hybrid swarm). Populations in temperate North America fall outside the circumboreal M. balthica complex discussed here (D=1.0), and are referred to M. petalum. In a scenario of the history and evolution of the M. balthica complex and the similarly subdivided Mytilus edulis complex, the divergence between Pacific and Atlantic taxa started after an initial introduction of Pacific ancestors to the Atlantic basin, enabled by the Pliocene opening of the Bering Strait. During the Pleistocene and Holocene, the ocean basins were, for the most part, effectively isolated, but occasional re-invasions have taken place, causing secondary contacts of the diverged bivalve types on the Atlantic coasts. The recently re-invaded Pacific taxa in northern Europe now seem to thrive only in the extreme marginal environments. Exact dating of the re-invasions is not possible from current data. Apart from the divergence through isolation, hybridization and introgression have significantly molded the present affinities within the M. balthica complex. A formal taxonomic treatment of reticulate and hybridizing lineages is problematic; yet to recognize the evolutionary and systematic diversity within the M. balthica complex, a subspecies distinction between the NE Atlantic clams and those from the Pacific, Baltic and White Sea basins is suggested.Communicated by L. Hagerman, Helsingør     

Assessment of the leaching of metallic elements in the technology of solidification in aqueous solution

Results are presented of experiments performed to optimize the solidification/stabilization system for metallic elements in aqueous solution. This system involves mixing cement and a solution of metallic elements in a conventional mixer: the paste thus obtained is transferred drop by drop into a recipient filled with an aqueous solution of NaOH at 20% by weight, in which it solidifies immediately. The separate use of chloride solutions of Li+, Cr3+, Pb2+ and Zn2+ makes it possible to obtain granules displaying various levels of compressive strength. Three different inertization matrices were used in the experiments, the first consisting solely of Portland cement, the second of Portland cement and a superplasticizer additive, and the third of Portland cement partially replaced with silica-fume and superplasticizer. The results of the tests performed showed a very low level of leaching into the alkaline solidification solution for Cr3+, the quantity leached being under 2% as against higher levels for the other metallic elements. For all the considered elements, the best results were obtained by using silica-fume in the inertization matrix.     

Waste ecocompatibility in storage and reuse scenarios: global methodology and detailed presentation of the impact study on the recipient environments

In 1995, the ADEME launched a research program called "Waste Ecocompatibility" in order to define a reliable methodology for measuring the impact of waste in storage or reuse scenarios. The French concept of "Ecocompatibility" is defined as the situation where the pollutant flux from waste disposed of or used in specified conditions is compatible with the environmental acceptance of the receiving environments. The chief feature of this definition is to integrate the evaluation of the three following terms: pollutants emission from the waste, transport of the pollutants from the waste to the receptor cells and the environmental acceptance of the receiving environments. The "Waste Ecocompatibility" program consisted of a literature survey and an experimental part. The literature study aimed to determine factors and waste characteristics to be considered for a reliable ecocompatility assessment, to provide an overview of the available tools for measuring those factors and characteristics and to propose a first approach of the methodology. In the framework of the experimental program, this approach was then applied to three theoretical scenarios to validate the laboratory tools (comparative study of laboratory and field results) and to calibrate the global methodology. This paper deals with the results of the experimental program concerning the impact study on receiving environments: impact on plants and microorganisms living in soil, impacts on soil fauna and aquatic fauna. In other papers we intend to present the operational methodology for the assessment of waste ecocompatibility. It includes bio-assays at laboratory scale (microcosms), pilot scale (mesocosms) and in situ experiments (experimental prairie). To limit the use of in situ experiments other research works are necessary to validate bio-assays at laboratory or pilot scale.     

Field testing of particulate matter continuous emission monitors at the DOE Oak Ridge TSCA incinerator. Toxic Substances Control Act

A field study to evaluate the performance of three commercially available particulate matter (PM) continuous emission monitors (CEMs) was conducted in 1999-2000 at the US Department of Energy (DOE) Toxic Substances Control Act (TSCA) Incinerator. This study offers unique features that are believed to enhance the collective US experience with PM CEMs. The TSCA Incinerator is permitted to treat PCB-contaminated RCRA hazardous low-level radioactive wastes. The air pollution control system utilizes MACT control technology and is comprised of a rapid quench, venturi scrubber, packed bed scrubber, and two ionizing wet scrubbers in series, which create a saturated flue gas that must be conditioned by the CEMs prior to measurement. The incinerator routinely treats a wide variety of wastes including high and low BTU organic liquids, aqueous, and solid wastes. The various possible combinations for treating liquid and solid wastes may present a challenge in establishing a single, acceptable correlation relationship for individual CEMs. The effect of low-level radioactive material present in the waste is a unique site-specific factor not evaluated in previous tests. The three systems chosen for evaluation were two beta gauge devices and a light scattering device. The performance of the CEMs was evaluated using the requirements in draft Environmental Protection Agency (EPA) Performance Specification 11 (PS11) and Procedure 2. The results of Reference Method 5i stack tests for establishing statistical correlations between the reference method data and the CEMs responses are discussed.     

Numerical Prediction of Dispersion Characteristics in an Urban Area Based on Grid Refinement and Various Turbulence Models

A detailed simulation of the Goettinger Strasse pollutantdispersion problem is performed using the CFD code CFX-TASCflow for different wind directions. Two turbulencemodels, the k- and the RSM are adopted on three gridrefinement levels. Besides the typical reference gridimplemented by the TRAPOS group, two different gridresolutions are introduced. The first refinement is in thewhole street canyon region on the x-y level, while thesecond one is local in all three directions. Validation ofall involved computational schemes is performed based onrelative available experimental data. The computed velocityfields and concentration contours imply that the typicalreference grid is a suitable choice for the velocityfields, while local grid refinement in all three directionsin a small region containing the receptor is required toupgrade the pollutant concentration results with modestadditional computational effort. Finally the RSM modelresulted in smaller concentration levels. The k-model compared to the RSM seems a more appropriate choiceto solve this particular problem.     

An anticlastogenic in vivo micronucleus assay for tea

Common use of antimutagens and anticarcinogens in everyday life is an effective measure for preventing human cancer and genetic diseases. Antioxidant properties of tea have vast potential as protective agents against diverse toxic effects. The present study was aimed to evaluate the role of aqueous clonal tea extracts (green tea, oolong tea and black tea) in modulating the genotoxic damage induced by cyclophosphamide (CP), a commonly used chemotherapeutic drug and a well-known mutagen and clastogen. All the three tea extracts at 1 and 2% concentration did not increase the frequency of micronucleated polychromatic erythrocytes (MPE) in bone marrow cells of mice when administered individually. The tea extracts decreased the micronuclei (MN) induced by CP. Therefore, regular intake of tea may improve the antioxidant status in in vivo and thereby reduce the risk of cancer and coronary heart disease.     

Implications of fluoride--an endless uncertainty

Fluorosis has become pandemic and it has assumed global status in the public health point of view. The paper deals with the health issues pertaining to fluorosis with special emphasis in the Indian context. It explains the equivocal evidences of fluoride-related problems and discusses the control measures of fluorosis. In general, it reveals how fluoride is useful at very low concentrations and at the same time brings forth manifestation of clinical abnormalities at higher concentrations that are the basis of the principles of toxicology.     

Effect of cadmium individually and in combination with other metals on the nutritive value of fresh water fish,Channa punctatus

Impact of metal cadmium on the nutritive value of Channa punctatus on exposure to a sublethal concentration (1.12 mg/l) of cadmium (Cd2+) for 15 and 60 days has been studied. Among the various parameters selected, the level of moisture in liver and muscle was increased, while decrease was noted in the level of ash, total proteins and inorganic constituents like iron, calcium, inorganic phosphate, sodium and potassium in both liver and muscle in the two types of exposure. The total lipid level of liver increased, while muscle lipid level was decreased. On the other hand, calcium, iron, inorganic phosphate, sodium and potassium levels showed increase in blood. Zinc and selenium decreased the percentage alterations in all the parameters selected for study. In the two types of exposure, zinc was most effective to counteract the cadmium toxicity to fish as in almost all the parameters insignificant alterations were recorded. In combination studies, protection against cadmium toxicity by the two chemicals became more marked with increase in the tenure of exposure.     

Wet oxidative regeneration of activated carbon loaded with reactive dye

Wet Oxidative Regeneration (WOR) of powdered activated carbon (PAC) and granular activated carbon (GAC) loaded with the reactive dyes, namely chemictive brilliant blue R and cibacron turquoise blue G, was studied. Attempts were made to regenerate the loaded carbons designated now as spent carbon. A slurry (10% w/v) of spent carbon in distilled water was oxidized by wet oxidation in the temperature range of 150-250 degrees C using oxygen partial pressures between 0.69-1.38 MPa in an 1 1 SS 316 autoclave. The percent regeneration was determined from a ratio, X(RC)/X(VC), corresponding to an equilibrium adsorption capacity of regenerated carbon/equilibrium adsorption capacity of virgin carbon from an initial adsorption period of 3 h. It was observed that the regeneration mainly occurred due to the oxidation of the adsorbates taking place on the surface of carbon. It was possible to regenerate the spent GAC and PAC to the extent of more than 98% (approximately X(RC)/X(VC) > 0.98) by wet oxidation. After four consecutive cycles of adsorption and regeneration using the same stocks of GAC, carbon weight loss observed at 200 degrees C was about 40%. SEM studies of the regenerated carbon showed widening of the pores and loss of structure between the adjacent pores as compared with the virgin carbon. PAC was found to be more suitable as compared with GAC for the adsorption and wet oxidative regeneration processes to treat the aqueous solution containing lower concentration of unhydrolyzed reactive dye. The suitability of wet oxidative regeneration is demonstrated at a bench scale to treat the synthetic reactive dye solution.