A potential solution to reduce global warming is to store greenhouse gases. Greenhouse gas storage has been recently improved using several materials and techniques. However, the actual storage capacity is slow, limited, and costly. Here, we tested the use of an accelerating agent, sodium dodecyl sulfate, and coal to produce methane hydrate for methane storage. Experiments of storing methane gas in coal samples have been carried out under high pressures, 4 or 6 MPa, and low temperature of 273.15 K. Results reveal that sodium dodecyl sulfate improved the rate up to 58.26 cm3/min and the capacity up to 179.97 volume at standard temperature and pressure per unit volume of coal. This finding shows that sodium dodecyl sulfate is efficient to accelerate the formation of methane hydrate. We also found that storage capacity increased with pressure. We conclude that our method allows a gas storage capacity higher than any other medium materials reported previously. 相似文献
A spent fluid catalytic cracking (FCC) catalyst containing lanthanum (La) was used as a novel adsorbent for phosphorus (P) in simulated wastewater. The experiments were conducted in a batch system to optimize the operation variables, including pH, calcination temperature, shaking time, solid-liquid ratio, and reaction temperature under three initial P-concentrations (C0 = 0.5, 1.0, and 5.0 mg/L). Orthogonal analysis was used to determine that the initial P-concentration was the most important parameter for P removal. The P-removal rate exceeded 99% and the spent FCC catalyst was more suitable for use in low P-concentration wastewater (C0 <5.0 mg/L). Isotherms, thermodynamics and dynamics of adsorption are used to analyze the mechanism of phosphorus removal. The results show that the adsorption is an endothermic reaction with high affinity and poor reversibility, which indicates a low risk of second releasing of phosphate. Moreover, chemical and physical adsorption coexist in this adsorption process with LaPO4 and KH2PO4 formed on the spent FCC catalyst as the adsorption product. These results demonstrate that the spent FCC catalyst containing La is a potential adsorbent for P-removal from wastewater, which allows recycling of the spent FCC catalyst to improve the quality of water body.
As an environmental friendly measure for surface runoff reduction, low impact development (LID) has been applied successfully in urban areas. However, due to high price of land and additional expense for LID construction in highly urbanized areas, the developers of real estate would not like to proceed LID exploitation. Floor area ratio (FAR) refers to “the ratio of a building’s total floor area to the size of the piece of land upon which it is built.” Increasing FAR indicates that the developers can construct higher buildings and earn more money. By means of awarding FAR, the developers may be willing to practice LID construction. In this study, a new residential district is selected as a case study to analyze the tradeoff between the runoff reduction goal achieving by LID practices and the incentive of awarding FAR to promote LID construction. The System for Urban Stormwater Treatment and Analysis IntegratioN (SUSTAIN) model is applied to simulate the runoff reduction under various LID designs and then derive the Pareto-optimal solutions to achieve urban runoff reduction goals based on cost efficiency. The results indicates that the maximum surface runoff reduction is 20.5%. Under the extremity scenarios, the government has options to award FAR of 0.028, 0.038 and 0.047 and the net benefits developers gain are 0 CNY, one million CNYand two million CNY, respectively. The results provide a LID construction guideline related to awarding FAR, which supports incentive policy making for promoting LID practices in the highly urbanized areas.
