RAINGAGE NETWORK DESIGN USING NEXRAD PRECIPITATION ESTIMATES1

ABSTRACT: A general framework is proposed for using precipitation estimates from NEXRAD weather radars in raingage network design. NEXRAD precipitation products are used to represent space time rainfall fields, which can be sampled by hypothetical raingage networks. A stochastic model is used to simulate gage observations based on the areal average precipitation for radar grid cells. The stochastic model accounts for subgrid variability of precipitation within the cell and gage measurement errors. The approach is ideally suited to raingage network design in regions with strong climatic variations in rainfall where conventional methods are sometimes lacking. A case study example involving the estimation of areal average precipitation for catchments in the Catskill Mountains illustrates the approach. The case study shows how the simulation approach can be used to quantify the effects of gage density, basin size, spatial variation of precipitation, and gage measurement error, on network estimates of areal average precipitation. Although the quality of NEXRAD precipitation products imposes limitations on their use in network design, weather radars can provide valuable information for empirical assessment of rain‐gage network estimation errors. Still, the biggest challenge in quantifying estimation errors is understanding subgrid spatial variability. The results from the case study show that the spatial correlation of precipitation at subgrid scales (4 km and less) is difficult to quantify, especially for short sampling durations. Network estimation errors for hourly precipitation are extremely sensitive to the uncertainty in subgrid spatial variability, although for storm total accumulation, they are much less sensitive.     

EVALUATION OF HYDROLOGIC BENEFITS OF INFILTRATION BASED URBAN STORM WATER MANAGEMENT1

ABSTRACT: As watersheds are urbanized, their surfaces are made less pervious and more channelized, which reduces infiltration and speeds up the removal of excess runoff. Traditional storm water management seeks to remove runoff as quickly as possible, gathering excess runoff in detention basins for peak reduction where necessary. In contrast, more recently developed “low impact” alternatives manage rainfall where it falls, through a combination of enhancing infiltration properties of pervious areas and rerouting impervious runoff across pervious areas to allow an opportunity for infiltration. In this paper, we investigate the potential for reducing the hydrologic impacts of urbanization by using infiltration based, low impact storm water management. We describe a group of preliminary experiments using relatively simple engineering tools to compare three basic scenarios of development: an undeveloped landscape; a fully developed landscape using traditional, high impact storm water management; and a fully developed landscape using infiltration based, low impact design. Based on these experiments, it appears that by manipulating the layout of urbanized landscapes, it is possible to reduce impacts on hydrology relative to traditional, fully connected storm water systems. However, the amount of reduction in impact is sensitive to both rainfall event size and soil texture, with greatest reductions being possible for small, relatively frequent rainfall events and more pervious soil textures. Thus, low impact techniques appear to provide a valuable tool for reducing runoff for the events that see the greatest relative increases from urbanization: those generated by the small, relatively frequent rainfall events that are small enough to produce little or no runoff from pervious surfaces, but produce runoff from impervious areas. However, it is clear that there still needs to be measures in place for flood management for larger, more intense, and relatively rarer storm events, which are capable of producing significant runoff even for undeveloped basins.     

渭南市道路移动源高分辨污染物排放清单及特征研究

应用MOVES-2014a模型并对其输入参数进行了本地化修正,计算了 2018年渭南市道路移动源污染物的排放因子和排放总量.基于渭南市路网分布和GIS信息及车流分布对污染物总排放量进行了空间和时间分配,建立了 1 km×1 km和l h分辨率的排放清单.结果表明,渭南市机动车排放CO、NMVOCs、NOx、NO2、NO...     

The Impact of Scrubber Sludge on Ground Water Quality at an Abandoned Mine Site

A sulfate-rich flue gas desulfurization scrubber sludge was used as a substitute backfill material in reclamation of an abandoned coal strip mine. The site was surrounded by monitor wells and the material was characterized for leaching behavior using open column experiments. A drain was placed directly beneath the 45 000 ton fill to enable sampling before dilution or attenuation. The column studies indicated that the scrubber sludge would adsorb manganese, iron, aluminium, cobalt, nickel, thallium and zinc contaminants from the water. Changes in pH appear inadequate to explain the removal by precipitation. The groundwater cleaning phenomenon has been confirmed on a field scale by the drain samples. Boron and molybdenum leach from the fly ash was used to fix the scrubber sludge and serve as marker elements enabling calibration of the dispersivity in computer models of the groundwater system at the site. The leachate front appears to be diluted by a factor of 8 : 1 within the first 15 meters. Since boron and molybdenum release are associated only with the first flush, environmental impacts will be minimal. Columns appear to create a time compression effect on the duration of leaching phenomenon. The effect for this site appears to be at least 5 : 1. The columns were effective in predicting which elements would leach or adsorb in the field and in predicting the actual source concentrations. Other shake tests such as the TCLP and the ASTM shake test were found to be less effective at predicting which elements would leach and were not helpful in predicting field concentrations.     

高海拔水电水库温室气体的排放特征——以雅鲁藏布江藏木水库为例

水电水库是大气温室气体的重要来源,在一定程度上影响着区域气候变化.然而目前关于水库温室气体排放的估算仍然存在很大的不确定性,一方面原因是缺失了世界各地山区水库的数据,另一方面原因是未将受水库影响的上下游河道考虑在内.本研究重点关注雅鲁藏布江流域水电水库——藏木水库丰枯水期CO2、CH4和N2O的溶存浓度与扩散通量的时空...     

Integration of traditional and innovative characterization techniques for flux-based assessment of Dense Non-aqueous Phase Liquid (DNAPL) sites

Key attributes of the source zone and the expanding dissolved plume at a trichloroethene (TCE) site in Australia were evaluated using trends in groundwater monitoring data along with data from on-line volatile organic compound (VOC) samplers and passive flux meters (PFMs) deployed in selected wells. These data indicate that: (1) residual TCE source mass in the saturated zone, estimated using two innovative techniques, is small ( 10 kg), which is also reflected in small source mass discharge ( 3 g/day); (2) the plume is disconnecting, based on TCE concentration contours and TCE fluxes in wells along a longitudinal transect; (3) there is minimal biodegradation, based on TCE mass discharge of  6 g/day at a plume control plane  175 m from source, which is also consistent with aerobic geochemical conditions observed in the plume; and (4) residual TCE in the vadose zone provides episodic inputs of TCE mass to the plume during infiltration/recharge events. TCE flux data also suggest that the small residual TCE source mass is present in the low-permeability zones, thus making source treatment difficult. Our analysis, based on a synthesis of the archived data and new data, suggests that source treatment is unwarranted, and that containment of the large TCE plume ( 1.2 km long,  0.3 km wide; 17 m deep;  2000–2500 kg TCE mass) or institutional controls, along with a long-term flux monitoring program, might be necessary. The flux-based site management approach outlined in this paper provides a novel way of looking beyond the complexities of groundwater contamination in heterogeneous domains, to make intelligent and informed site decisions based on strategic measurement of the appropriate metrics.     

局部断层场地对平面SV波的散射

借助Wolf的土层和半空间精确动力刚度矩阵及斜线荷载的格林函数,利用间接边界元法在频域内求解了局部断层场地对SV波的散射,着重分析了破碎带较窄断层两侧围岩动力响应的基本规律,以及场地动力特性对散射的影响.研究表明,破碎带断层对SV波有显著的影响,即使破碎带很窄,也可以对SV波产生很大的放大作用;层状场地的动力特性对放大作用有显著的影响.     

Dioxin-like compounds in Australian sewage sludge--review and national survey

An Australian survey of dioxin-like compounds in sewage sludge was conducted in two parts (a) a national survey, and (b) a time-study. All sewage sludge samples analysed as part of these studies had low overall concentrations of dioxin-like compounds. Out of 37 samples, all except one, were within the reported concentration range of soil within the Australian environment. The mean concentration of dioxin-like compounds in the Australian sewage sludge survey of 2006 was found to be 5.6 (s.d. 4.5) ng WHO(05) TEQkg(-1) (n=14) and were within the range of 1.2-15.3 ng WHO(05) TEQ kg(-1). All the Australian sewage sludge samples cited in these studies were below the Victorian EPA "investigation limit" of 50 ng WHO(98) TEQ kg(-1), and well below the European proposed guidelines of 100 ng I-TEQ kg(-1). The burden of dioxin-like compounds in Australian sewage sludge is low and its land application as biosolids is not likely to pose a problem. A general positive relationship was found between population of the town producing the waste and both dioxin-like PCDD/Fs and dioxin-like PCBs. The one exception to this trend was sludge from a town that had a history of smelting and had a relatively high burden of dioxin-like compounds. Sludge from one rural WWTP also had a higher burden of dioxin-like compounds. The treatment plant services a geographically isolated town with a low population and no known emitters of dioxin-like compounds. However, this sample also had a relatively high burden of dioxin-like PCBs, which could be the source of the dioxin-like PCDD/Fs found in this sludge. The time study analyzing sludges from three WWTP from the same city between the years 2002 and 2006 found no apparent difference between WWTPs, but a statistically significant decline of 1.49 ng WHO(05) TEQ kg(-1) per year. Also, a comprehensive review of the scientific literature, presents typical levels and sources of dioxin-like compounds in international sewage sludges.     

The Accuracy of Mortality Reporting in Displaced Persons Camps During the Post-emergency Phase

For humanitarian organisations, accurate data are essential to identify emerging health problems and determine programme needs. We visited 45 post-emergency phase displaced persons camps and collected three months' mortality data which we compared with organisations' routine mortality reports. Organisations reported 612 deaths and we identified 741 deaths, for a mortality-reporting ratio, defined as the number of organisation-reported deaths divided by the number of investigator-identified deaths, of 83 per cent. For the majority of camps which under-reported deaths, mortality reporting ratios were significantly higher for women than men, and for camps with central mortality registers rather than those without. In the few camps which over-reported deaths, these occurred primarily among children younger than five years of age, probably due to the inclusion of abortions and stillbirths. Despite the overall under-reporting of deaths by humanitarian organisations, the existing health information systems appear to estimate mortality rates adequately in these post-emergency camps. However, organisations should improve the precision and completeness with which they report the characteristics of deaths in order to provide valuable data to target their programmes at the most vulnerable people.     

Accumulation of dechlorination daughter products: A valid metric of chloroethene biodegradation

In situ reductive dechlorination of perchloroethene (PCE) and trichloroethene (TCE) generates characteristic chlorinated (cis‐dichloroethene [cis‐DCE] and vinyl chloride [VC]) and nonchlorinated (ethene and ethane) products. The accumulation of these daughter products is commonly used as a metric for ongoing biodegradation at field sites. However, this interpretation assumes that reductive dechlorination is the only chloroethene degradation process of any significance in situ and that the characteristic daughter products of chloroethene reductive dechlorination persist in the environment. Laboratory microcosms, prepared with aquifer and surface‐water sediments from hydrologically diverse sites throughout the United States and amended with [1,2‐¹⁴C] TCE, [1,2‐¹⁴C] DCE, [1,2‐¹⁴C] DCA, or [1,2‐¹⁴C] VC, demonstrated widely variable patterns of intermediate and final product accumulation. In predominantly methanogenic sediment treatments, accumulation of ¹⁴C‐DCE, ¹⁴C‐VC, ¹⁴C‐ethene, and ¹⁴C‐ethane predominated. Treatments characterized by significant Fe(III) and/or Mn(IV) reduction, on the other hand, demonstrated substantial, and in some cases exclusive, accumulation of ¹⁴CO₂ and ¹⁴CH₄. These results suggest that relying on the accumulation of cis‐DCE, VC, ethene, and ethane may substantially underestimate overall chloroethene biodegradation at many sites. © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. government work and, as such, is in the public domain in the United States of America.