A Decision Support Framework for Science-Based, Multi-Stakeholder Deliberation: A Coral Reef Example

We present a decision support framework for science-based assessment and multi-stakeholder deliberation. The framework consists of two parts: a DPSIR (Drivers–Pressures–States–Impacts–Responses) analysis to identify the important causal relationships among anthropogenic environmental stressors, processes, and outcomes; and a Decision Landscape analysis to depict the legal, social, and institutional dimensions of environmental decisions. The Decision Landscape incorporates interactions among government agencies, regulated businesses, non-government organizations, and other stakeholders. It also identifies where scientific information regarding environmental processes is collected and transmitted to improve knowledge about elements of the DPSIR and to improve the scientific basis for decisions. Our application of the decision support framework to coral reef protection and restoration in the Florida Keys focusing on anthropogenic stressors, such as wastewater, proved to be successful and offered several insights. Using information from a management plan, it was possible to capture the current state of the science with a DPSIR analysis as well as important decision options, decision makers and applicable laws with a the Decision Landscape analysis. A structured elicitation of values and beliefs conducted at a coral reef management workshop held in Key West, Florida provided a diversity of opinion and also indicated a prioritization of several environmental stressors affecting coral reef health. The integrated DPSIR/Decision landscape framework for the Florida Keys developed based on the elicited opinion and the DPSIR analysis can be used to inform management decisions, to reveal the role that further scientific information and research might play to populate the framework, and to facilitate better-informed agreement among participants.     

Evaluation of alternative PCB clean-up strategies using an individual-based population model of mink

Population models can be used to place observed toxic effects into an assessment of the impacts on population-level endpoints, which are generally considered to provide greater ecological insight and relevance. We used an individual-based model of mink to evaluate the population-level effects of exposure to polychlorinated biphenyls (PCBs) and the impact that different remediation strategies had on mink population endpoints (population size and extinction risk). Our simulations indicated that the initial population size had a strong impact on mink population dynamics. In addition, mink populations were extremely responsive to clean-up scenarios that were initiated soon after the contamination event. In fact, the rate of PCB clean-up did not have as strong a positive effect on mink as did the initiation of clean-up (start time). We show that population-level approaches can be used to understand adverse effects of contamination and to also explore the potential benefits of various remediation strategies.     

Blood dioxin biomonitoring to assess local residents' exposure from a large urban remediation project

Background

A total of 265 000 m³ of dioxin contaminated soil and sediments from past industrial activity was treated on site in an urban setting in Sydney, Australia. To respond to local community concerns about potential dioxin exposure from fugitive emissions a human biomonitoring study was undertaken.

Objective

To determine whether local residents were exposed to significant amounts of dioxin from the remediation process.Methods: Blood samples were collected from local residents around the site and a representative metropolitan control group. They were pooled within age and sex strata and the change in dioxin concentrations over the remediation period and a summary of the mid point and post remediation dioxin concentrations were compared between groups. Information on dietary intake was collected to look for possible confounding.

Results

The mean dioxin Toxic Equivalent concentrations (TeQ) decreased among both the local resident and control groups over the remediation period by 1.9 and 2.1 pg gm⁻¹ lipid respectively. Modelled blood concentrations adjusting for age and sex did not detect a significant difference between groups for changes in either TeQ or 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8 TCDD). The summary measure approach did however demonstrate that the 2,3,7,8 TCDD concentrations among the local resident group was approximately 0.7 pg g⁻¹ lipid higher compared to the control group post remediation. There were no significant changes in dietary intake sources of dioxin.

Conclusion

Biomonitoring demonstrated that local residents were not exposed to significant quantities of dioxin. Large scale remediation of dioxin contaminated land can be safely undertaken in an urban setting.     

A Comparative Study of Environmental Tobacco Smoke Particulate Mass Measurements in an Environmental Chamber

Particulate mass concentration measurements have been made on environmental tobacco smoke (ETS) for the purpose of assessing the relative accuracy of several measurement procedures. ETS over a range of concentrations was generated in an environmental chamber by three methods. Mass concentration was measured by a gravimetric/spectrophotometric collection procedure, piezoelectric particle mass monitors, two nephelometry-based mass monitors, and a particle counting and sizing system. Two-hour average mass concentrations were determined by each method for concentrations ranging from very low levels up to those achieved by smoking one entire cigarette in the chamber. Statistical comparisons were made among procedures employing the gravimetric filter measurement as the basis for comparison. One nephelometry-based procedure gave significantly higher and the other significantly lower values than the filter determination. In one case, a correction for the difference between the particle mass density of the calibrating aerosol and that of ETS brought the nephelometry-based procedure into reasonable agreement with the filter measurement, while for the other, the correction did not resolve the discrepancy between methods. Statistically significant differences between the responses of two supposedly identical piezoelectric mass monitors were found, as was some slight dependence of the nephelometry- based procedures on method of ETS generation. In summary, the results indicate that significant errors can be expected if the instruments studied are used “off the shelf,” even for ETS generated under controlled laboratory conditions. Caution should be employed in field measurements where numerous sources and types of particulate matter can be encountered.     

Development and Pilot Plant Evaluation of Silica- Enhanced Lime Sorbents for Dry Flue Gas Desulfurization

EPA’s efforts to develop low cost, retrofitable flue gas cleaning technology include the development of highly reactive sorbents. Recent work addressing lime enhancement and testing at the bench-scale followed by evaluation of the more promising sorbents in a pilot plant are discussed here.

The conversion of Ca(OH)₂ with SO₂ increased several-fold compared with Ca(OH)₂ alone when Ca(OH)₂ was slurrled with fly ash first and later exposed to SO₂ in a laboratory packed bed reactor. Ca(OH)₂ enhancement increased with the increased fly ash amount. Dlatomaceous earths were very effective reactivity promoters of lime-based sorbents. Differential scanning calorimetry of the promoted sorbents revealed the formation of a new phase (calcium silicate hydrates) after hydration, which may be the basis for the observed Improved SO₂ capture.

Fly ash/lime and diatomaceous earth/lime sorbents were tested in a 100 m³/h pilot facility incorporating a gas humidifier, a sorbent duct injection system, and a baghouse. The inlet SO₂ concentration range was 1000-2500 ppm. With once-through dry sorbent injection into the humidified flue gas [approach to saturation 10–20°C (18–36°F) in the baghouse], the total SO₂ removal ranged from 50 to 90 percent for a stoichiometric ratio of 1 to 2. Recycling the collected solids resulted in a total lime utilization exceeding 80–90 percent. Increased lime utilization was also investigated by the use of additives.     

Bacterial communities in urban aerosols collected with wetted-wall cyclonic samplers and seasonal fluctuations of live and culturable airborne bacteria

Airborne transmission of bacterial pathogens from point sources (e.g., ranches, dairy waste treatment facilities) to areas of food production (farms) has been suspected. Determining the incidence, transport and viability of extremely low levels of pathogens require collection of high volumes of air and characterization of live bacteria from aerosols. We monitored the numbers of culturable bacteria in urban aerosols on 21 separate days during a 9 month period using high volume cyclonic samplers at an elevation of 6 m above ground level. Culturable bacteria in aerosols fluctuated from 3 CFU to 6 million CFU/L of air per hour and correlated significantly with changes in seasonal temperatures, but not with humidity or wind speed. Concentrations of viable bacteria determined by fluorescence staining and flow cytometry correlated significantly with culturable bacteria. Members of the phylum Proteobacteria constituted 98% of the bacterial community, which was characterized using 16S rRNA gene sequencing using DNA from aerosols. Aquabacterium sp., previously characterized from aquatic environments, represented 63% of all clones and the second most common were Burkholderia sp; these are ubiquitous in nature and some are potential human pathogens. Whole genome amplification prior to sequencing resulted in a substantial decrease in species diversity compared to characterizing culturable bacteria sorted by flow cytometry based on scatter signals. Although 27 isolated colonies were characterized, we were able to culture 38% of bacteria characterized by sequencing. The whole genome amplification method amplified DNA preferentially from Phyllobacterium myrsinacearum, a minor member of the bacterial communities, whereas Variovorax paradoxus dominated the cultured organisms.     

Differences in sensitivity to the fungal pathogen Batrachochytrium dendrobatidis among amphibian populations

Contributing to the worldwide biodiversity crisis are emerging infectious diseases, which can lead to extirpations and extinctions of hosts. For example, the infectious fungal pathogen Batrachochytrium dendrobatidis (Bd) is associated with worldwide amphibian population declines and extinctions. Sensitivity to Bd varies with species, season, and life stage. However, there is little information on whether sensitivity to Bd differs among populations, which is essential for understanding Bd‐infection dynamics and for formulating conservation strategies. We experimentally investigated intraspecific differences in host sensitivity to Bd across 10 populations of wood frogs (Lithobates sylvaticus) raised from eggs to metamorphosis. We exposed the post‐metamorphic wood frogs to Bd and monitored survival for 30 days under controlled laboratory conditions. Populations differed in overall survival and mortality rate. Infection load also differed among populations but was not correlated with population differences in risk of mortality. Such population‐level variation in sensitivity to Bd may result in reservoir populations that may be a source for the transmission of Bd to other sensitive populations or species. Alternatively, remnant populations that are less sensitive to Bd could serve as sources for recolonization after epidemic events.     

Technical feasibility and conceptual design for using supercritical fluid to extract pesticides from aged soil

The demand for processes to clean up contaminated soils without introducing additional contaminants is increasing. One approach to solving this problem is the use of supercritical fluids like carbon dioxide, alone or with cosolvents, to extract contaminants from the soil. Carbon dioxide is readily available, inexpensive, and nonpolluting. Gases exhibit unique properties under supercritical conditions. They retain the ability to diffuse through the interstitial spaces of solid materials, plus they have the solvating power of liquids. Soil cleanup using supercritical fluid extraction (SFE) is being investigated as an alternative/complementary technology to other cleanup methods such as incineration and bioremediation. The objective of the studies included in this article was to collect and analyze data to support use of the SFE technology and to provide the conceptual design and operational processes needed for building a portable treatment unit.     

Benefits of kin association: related and familiar zebrafish larvae (<Emphasis Type="Italic">Danio rerio</Emphasis>) show improved growth

Zebrafish (Danio rerio) larvae prefer the olfactory cues of kin to non-kin. We examined the potential benefits of kin preference by comparing growth rate, shoaling, and aggressive behavior in juvenile zebrafish housed in groups of either familiar kin or unfamiliar non-kin. Over an observation period of 5 days, the animals grew 33% more in kin groups; however, neither shoaling nor the frequency of aggressive interactions was different in groups of related versus unrelated individuals. Shoaling behavior increased with increasing observation time and increasing age, while aggressive behavior remained the same. We conclude that associating with kin probably creates a less stressful environment that allows for higher growth rates, which can lead to higher direct fitness based on increased survival and earlier reproduction. Kin recognition leading to kin-structured groups may therefore be under positive selection.     

Characterizing the landscape dynamics of an invasive plant and risk of invasion using remote sensing.

Improved understanding of the spatial dynamics of invasive plant species may lead to more effective land management and reduced future invasion. Here, we identified the spatial extents of nonnative cheatgrass (Bromus tectorum) in the north central Great Basin using remotely sensed data from Landsat MSS, TM, and ETM+. We compared cheatgrass extents in 1973 and 2001 to six spatially explicit landscape variables: elevation, aspect, hydrographic channels, cultivation, roads, and power lines. In 2001, Cheatgrass was 10% more likely to be found in elevation ranges from 1400 to 1700 m (although the data suggest a preferential invasion into lower elevations by 2001), 6% more likely on west and northwest facing slopes, and 3% more likely within hydrographic channels. Over this time period, cheatgrass expansion was also closely linked to proximity to land use. In 2001, cheatgrass was 20% more likely to be found within 3 km of cultivation, 13% more likely to be found within 700 m of a road, and 15% more likely to be found within 1 km of a power line. Finally, in 2001 cheatgrass was 26% more likely to be present within 150 m of areas occupied by cheatgrass in 1973. Using these relationships, we created a risk map of future cheatgrass invasion that may aid land management. These results highlight the importance of including land use variables and the extents of current plant invasion in predictions of future risk.