Riparian buffer strips as a multifunctional management tool in agricultural landscapes: introduction

Catchment riparian areas are considered key zones to target mitigation measures aimed at interrupting the movement of diffuse substances from agricultural land to surface waters. Hence, unfertilized buffer strips have become a widely studied and implemented "edge of field" mitigation measure assumed to provide an effective physical barrier against nitrogen (N), phosphorus (P), and sediment transfer. To ease the legislative process, these buffers are often narrow mandatory strips along streams and rivers, across different riparian soil water conditions, between bordering land uses of differing pollution burdens, and without prescribed buffer management. It would be easy to criticize such regulation for not providing the opportunity for riparian ecosystems to maximize their provision for a wider range of ecosystem goods and services. The scientific basis for judging the best course of action in designing and placing buffers to enhance their multifunctionality has slowly increased over the last five years. This collection of papers aims to add to this body of knowledge by giving examples of studies related to riparian buffer management and assessment throughout Europe. This introductory paper summarizes discussion sessions and 13 selected papers from a workshop held in Ballater, UK, highlighting research on riparian buffers brought together under the EU COST Action 869 knowledge exchange program. The themes addressed are (i) evidence of catchment- to national-scale effectiveness, (ii) ecological functioning linking terrestrial and aquatic habitats, (iii) modeling tools for assessment of effectiveness and costs, and (iv) process understanding enabling management and manipulation to enhance pollutant retention in buffers. The combined understanding led us to consider four principle key questions to challenge buffer strip research and policy.     

Measurement of Hydrocarbon Emissions Fluxes from Refinery Wastewater Impoundments Using Atmospheric Tracer Techniques

Sulfur hexafluoride (SF6) tracer was used in a series of the experiments to simulate emissions of benzene, toluene, ethyl-benzene, and xylenes (BTEX) from a refinery wastewater basin. The ratio of the measured tracer release to the ambient tracer concentration established a dilution factor which was then used to calculate the mass flux of BTEX from the wastewater basin using the ambient BTEX concentration data. Measured fluxes of BTEX varied from 7 g/min to 70 g/min.

The CHEMDAT7 air emissions model was then used to predict emissions for comparison with the emissions measured using the tracer flux simulation. CHEMDAT7 typically overpredicted total measured BTEX emissions by factors of twelve to seventeen. The degree of overprediction varied both by the individual compound and the module of CHEMDAT7 used to predict emission fluxes.     

Modeling the Effects of VOC/NOx Emissions on Ozone Synthesis in the Cascadia Airshed of the Pacific Northwest

ABSTRACT

A modeling system consisting of MM5, Calmet, and Calgrid was used to investigate the sensitivity of anthropogenic volatile organic compound (VOC) and oxides of nitrogen (NO_x) reductions on ozone formation within the Cascadia airshed of the Pacific Northwest. An ozone episode that occurred on July 11-14, 1996, was evaluated. During this event, high ozone levels were recorded at monitors downwind of Seattle, WA, and Portland, OR, with one monitor exceeding the 1 hr/120 ppb National Ambient Air Quality Standard (at 148 ppb), and six monitors above the proposed 8 hr/80 ppb standard (at 82-130 ppb). For this particular case, significant emissions reductions, between 25 and 75%, would be required to decrease peak ozone concentrations to desired levels. Reductions in VOC emissions alone, or a combination of reduced VOC and NO_x emissions, were generally found to be most effective; reducing NO_x emissions alone resulted in increased ozone in the Seattle area. When only VOC emissions were curtailed, ozone reductions occurred in the immediate vicinity of densely populated areas, while NO_x reductions resulted in more widespread ozone reductions.     

Use of Membrane Collectors in Electrostatic Precipitators

ABSTRACT

Membrane collection surfaces, developed and patented by researchers at Ohio University, were used to replace steel plates in a dry electrostatic precipitator (ESP). Such replacement facilitates tension-based rapping, which shears the adhered particle layer from the collector surface more effectively than hammer-based rapping. Tests were performed to measure the collection efficiency of the membranes and to quantify the potential improvements of this novel cleaning technique with respect to re-entrainment. Results indicate that even semiconductor materials (e.g., carbon fibers) collect ash nearly as efficiently as steel plates, potentially indicating that collection surface resistivity is primarily dictated by the accumulated ash layer and not by the underlying plate conductivity. In addition, virtually all sheared particles separated from the collecting membranes fell within the boundary layer of the membrane, indicating extremely low potential for re-entrainment.     

Downstream Dissipation of Storm Flow Heat Pulses: A Case Study and its Landscape‐Level Implications

Storms in urban areas route heat and other pollutants from impervious surfaces, via drainage networks, into streams with well‐described negative consequences on physical structure and biological integrity. We used heat pulses associated with urban storms as a tracer for pavement‐derived stormwater inputs, providing a conservative estimate of the frequency with which these pollutants are transported into and through protected stream reaches. Our study was conducted within a 1.5‐km reach in Durham, North Carolina, whose headwaters begin in suburban stormwater pipes before flowing through 1 km of protected, 100‐year‐old forest. We recorded heat‐pulse magnitudes and distances travelled downstream, analyzing how they varied with storm and antecedent flow conditions. We found heat pulses >1°C traveled more than 1 km downstream of urban inputs in 11 storms over one year. This best‐case management scenario of a reach within a protected forest shows that urban impacts can travel far downstream of inputs. Air temperature and flow intensity controlled heat‐pulse magnitude, while heat‐pulse size, mean flow, and total precipitation controlled dissipation distance. As temperatures and sudden storms intensify with climate change, heat‐pulse magnitude and dissipation distance will likely increase. Streams in urbanized landscapes, such as Durham municipality, where 98.9% of streams are within 1 downstream km of stormwater outfalls, will be increasingly impacted by urban stormwaters.     

Management of Large Wood in Streams: An Overview and Proposed Framework for Hazard Evaluation

Instream and floodplain wood can provide many benefits to river ecosystems, but can also create hazards for inhabitants, infrastructure, property, and recreational users in the river corridor. We propose a decision process for managing large wood, and particularly for assessing the relative benefits and hazards associated with individual wood pieces and with accumulations of wood. This process can be applied at varying levels of effort, from a relatively cursory visual assessment to more detailed numerical modeling. Decisions to retain, remove, or modify wood in a channel or on a floodplain are highly dependent on the specific context: the same piece of wood that might require removal in a highly urbanized setting may provide sufficient benefits to justify retention in a natural area or lower‐risk urban setting. The proposed decision process outlined here can be used by individuals with diverse technical backgrounds and in a range of urban to natural river reaches so that opportunities for wood retention or enhancement are increased.     

Sea-Level Rise and Coastal Wetlands

This paper seeks to quantify the impact of a 1-m sea-level rise on coastal wetlands in 86 developing countries and territories. It is found that approximately 68 % of coastal wetlands in these countries are at risk. A large percentage of this estimated loss is found in Europe and Central Asia, East Asia, and the Pacific, as well as in the Middle East and North Africa. A small number of countries will be severely affected. China and Vietnam (in East Asia and the Pacific), Libya and Egypt (in the Middle East and North Africa), and Romania and Ukraine (in Europe and Central Asia) will bear most losses. In economic terms, the loss of coastal wetlands is likely to exceed $703 million per year in 2000 US dollars.     

Air impacts from three alternatives for producing JP-8 jet fuel

To increase U.S. petroleum energy independence, the University of Texas at Arlington (UT Arlington) has developed a direct coal liquefaction process which uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This sweet crude can be refined to form JP-8 military jet fuel, as well as other end products like gasoline and diesel. This paper presents an analysis of air pollutants resulting from using UT Arlington's liquefaction process to produce crude and then JP-8, compared with 2 alternative processes: conventional crude extraction and refining (CCER), and the Fischer-Tropsch process. For each of the 3 processes, air pollutant emissions through production of JP-8 fuel were considered, including emissions from upstream extraction/production, transportation, and conversion/refining. Air pollutants from the direct liquefaction process were measured using a LandTEC GEM2000 Plus, Draeger color detector tubes, OhioLumex RA-915 Light Hg Analyzer, and SRI 8610 gas chromatograph with thermal conductivity detector.

According to the screening analysis presented here, producing jet fuel from UT Arlington crude results in lower levels of pollutants compared to international conventional crude extraction/refining. Compared to US domestic CCER, the UTA process emits lower levels of CO₂-e, NOx, and Hg, and higher levels of CO and SO₂. Emissions from the UT Arlington process for producing JP-8 are estimated to be lower than for the Fischer-Tropsch process for all pollutants, with the exception of CO₂-e, which were high for the UT Arlington process due to nitrous oxide emissions from crude refining. When comparing emissions from conventional lignite combustion to produce electricity, versus UT Arlington coal liquefaction to make JP-8 and subsequent JP-8 transport, emissions from the UT Arlington process are estimated to be lower for all air pollutants, per MJ of power delivered to the end user.

Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. At current use rates, U.S. coal reserves (262 billion short tons, including 23 billion short tons lignite) would last 236 years. Accordingly, the University of Texas at Arlington (UT Arlington) has developed a process that converts lignite to crude oil, at about half the cost of regular crude. According to the screening analysis presented here, producing jet fuel from UT Arlington crude generates lower levels of pollutants compared to international conventional crude extraction/refining (CCER).     

Who counts,what counts: representation and accountability in water governance in the Upper Comoé sub‐basin,Burkina Faso

This article examines the unfolding of integrated water resource management (IWRM) reforms in southwest Burkina Faso, where water resources are subject to conflicting claims by a diversity of users. We first describe the establishment a local water user committee, showing how choices regarding composition and operations grant varying levels of recognition to different stakeholders. We then discuss the implications for key dimensions of decentralized governance, namely representation and accountability. In particular we focus on: (a) how the interplay of political agendas and policy disconnects shapes the committee's viability and credibility and (b) how tensions between techno‐scientific and local knowledge affect participation and transparency. We argue that in contexts defined by contentious politics and neo‐patrimonial practices, representativeness is better ensured by the direct inclusion of user groups rather than elected officials. Though limited discretionary power, information access, and technical capabilities of committee members inhibit accountability, rural producers uphold their claims through social mobilization and reliance on local knowledge. Recognizing the opportunities offered by the country's recent democratic turn, we formulate recommendations aimed at addressing structural drivers and enabling citizen agency in decentralized water governance. At the same time, further research is needed on local people's understandings of representation and accountability, to ensure that they are involved in institutional design and practices in ways that affirm what they value and what they know.