Determination of the emissions from an aircraft auxiliary power unit (APU) during the Alternative Aviation Fuel Experiment (AAFEX)

The emissions from a Garrett-AiResearch (now Honeywell) Model GTCP85-98CK auxiliary power unit (APU) were determined as part of the National Aeronautics and Space Administration's (NASA's) Alternative Aviation Fuel Experiment (AAFEX) using both JP-8 and a coal-derived Fischer Tropsch fuel (FT-2). Measurements were conducted by multiple research organizations for sulfur dioxide (SO2, total hydrocarbons (THC), carbon monoxide (CO), carbon dioxide (CO2), nitrogen oxides (NOx), speciated gas-phase emissions, particulate matter (PM) mass and number, black carbon, and speciated PM. In addition, particle size distribution (PSD), number-based geometric mean particle diameter (GMD), and smoke number were also determined from the data collected. The results of the research showed PM mass emission indices (EIs) in the range of 20 to 700 mg/kg fuel and PM number EIs ranging from 0.5 x 10(15) to 5 x 10(15) particles/kg fuel depending on engine load and fuel type. In addition, significant reductions in both the SO2 and PM EIs were observed for the use of the FT fuel. These reductions were on the order of approximately 90% for SO2 and particle mass EIs and approximately 60% for the particle number EI, with similar decreases observed for black carbon. Also, the size of the particles generated by JP-8 combustion are noticeably larger than those emitted by the APU burning the FT fuel with the geometric mean diameters ranging from 20 to 50 nm depending on engine load and fuel type. Finally, both particle-bound sulfate and organics were reduced during FT-2 combustion. The PM sulfate was reduced by nearly 100% due to lack of sulfur in the fuel, with the PM organics reduced by a factor of approximately 5 as compared with JP-8.     

Nitrogen Oxides Emission Control Options for Coal-Fired Electric Utility Boilers

Abstract

Recent regulations have required reductions in emissions of nitrogen oxides (NO_x) from electric utility boilers. To comply with these regulatory requirements, it is increasingly important to implement state-of-the-art NO_x control technologies on coal-fired utility boilers. This paper reviews NO_x control options for these boilers. It discusses the established commercial primary and secondary control technologies and examines what is being done to use them more effectively. Furthermore, the paper discusses recent developments in NO_x controls. The popular primary control technologies in use in the United States are low-NO_x burners and overfire air. Data reflect that average NO_x reductions for specific primary controls have ranged from 35% to 63% from 1995 emissions levels. The secondary NO_x control technologies applied on U.S. coal-fired utility boilers include reburning, selective noncatalytic reduction (SNCR), and selective catalytic reduction (SCR). Thirty-six U.S. coal-fired utility boilers have installed SNCR, and reported NO_x reductions achieved at these applications ranged from 15% to 66%. Recently, SCR has been installed at >150 U.S. coal-fired utility boilers. Data on the performance of 20 SCR systems operating in the United States with low-NO_x emissions reflect that in 2003, these units achieved NO_x emission rates between 0.04 and 0.07 lb/10⁶ Btu.     

Emissions Control and Ambient Air Quality at a Secondary Steel Production Facility

Steel production from electric arc furnaces has been continuously rising over the past few years. The trend is expected to continue due to both the anticipated increase in demand for steel, and to the replacement of obsolete open hearth furnaces. In 1972 steel produced in electric arc furnaces, which makes up 25 to 30% of the annual United States steel production, was produced primarily from recycled scrap steel in approximately 300 electric arc furnaces operated by 99 companies at 121 locations.¹ Over half of these furnaces are smaller than 50 tons, and many are located in small bar mills producing a variety of merchant steel products.     

COMPLEX I and II Model Performance Evaluation in Nevada and New Mexico

The COMPLEX I and COMPLEX II Gaussian dispersion models for complex terrain applications have been made available by EPA. Various terrain treatment options under IOPT(25) can be selected for a particular application, one of which [IOPT(25) = 1] is an algorithm similar to that of the VALLEY model. A model performance evaluation exercise involving three of the available options with both COMPLEX models was carried out using SF⁶ tracer measurements taken during worst-case stable impaction conditions in complex terrain at the Harry Allen Plant site in southern Nevada. The models did not reproduce observed concentrations on an event by event basis, as correlation coefficients for 1-h concentrations of 0-0.3 were exhibited. When observed and calculated cumulative frequency distributions for 1-h and 3-h concentrations were compared, a close correspondence between observations and concentrations calculated with COMPLEX I, IOPT(25) = 2 or 3 was noted; both options consistently overestimated observed concentrations. With IOPT(25) = 1, upper percentile (maximum) values in the calculated frequency distribution exceeded the corresponding IOPT(25) = 2 or 3 value by roughly a factor of 2, and observed values by 2.5-5. COMPLEX II typically produced maximum values 2-4 times as great as COMPLEX I for the same terrain treatment option. From these results it is concluded that: 1) the physically unrealistic sector-spread approach used in VALLEY and COMPLEX I under stable impaction conditions is a surrogate for wind direction variation, and 2) the doubling of the plume centerline concentration due to ground reflection under terrain impingement conditions that is included in IOPT(25) = 1 is inappropriate.

These findings were found to be consistent with an analysis of noncurrent observed and calculated SO₂ χ/Q frequency distributions for 1, 3, and 24 hours near the Four Corners Plant in New Mexico. The comparison involved a four-year calculated χ/Q data set and a two-year observed χ/Q data set at the worst-case high terrain impact location near the plant.     

Benthic macrofaunal assemblages of the San Francisco Estuary and Delta, USA

The spatial and temporal distribution of macrobenthic assemblages in the San Francisco Estuary and Sacramento–San Joaquin River Delta were identified using hierarchical cluster analysis of 501 samples collected between 1994 and 2008. Five benthic assemblages were identified that were distributed primarily along the salinity gradient: (1) a polyhaline assemblage that inhabits the Central Bay, (2) a mesohaline assemblage that inhabits South Bay and San Pablo Bay, (3) a low-diversity oligohaline assemblage primarily in Suisun Bay, (4) a low-diversity sand assemblage that occurs at various locations throughout the Estuary, and (5) a tidal freshwater assemblage in the Delta. Most sites were classified within the same assemblage in different seasons and years, but a few sites switched assemblage designations in response to seasonal changes in salinity from freshwater inflows.     

Improved nitrogen removal in dual-contaminated surface water by photocatalysis

River waters in China have dual contamination by nutrients and recalcitrant organic compounds. In principle, the organic compounds could be used to drive denitrification of nitrate, thus arresting eutrophication potential, if the recalcitrant organics could be made bioavailable. This study investigated the potential to make the recalcitrant organics bioavailable through photocatalysis. Batch denitrification tests in a biofilm reactor demonstrated that dual-contaminated river water was short of available electron donor, which resulted in low total nitrogen (TN) removal by denitrification. However, the denitrification rate was increased significantly by adding glucose or by making the organic matters of the river water more bioavailable through photocatalysis. Photocatalysis for 15 min increased the Chemical Oxygen Demand (COD) of the river water from 53 to 84 mg·L^-1 and led to a 4-fold increase in TN removal. The increase in TN removal gave the same effect as adding 92 mg·L^-1 of glucose. During the photocatalysis experiments, the COD increased because photocatalysis transformed organic molecules from those that are resistant to dichromate oxidation in the COD test to those that can be oxidized by dichromate. This phenomenon was verified by testing photocatalysis of pyridine added to the river water. These findings point to the potential for N removal via denitrification after photocatalysis, and they also suggest that the rivers in China may be far more polluted than indicated by COD assays.     

Bioreduction of vanadium (V) in groundwater by autohydrogentrophic bacteria: Mechanisms and microorganisms

As one of the transition metals, vanadium(V)(V(V)) in trace amounts represents an essential element for normal cell growth, but becomes toxic when its concentration is above 1 mg/L. V(V) can alter cellular differentiation, gene expression, and other biochemical and metabolic phenomena. A feasible method to detoxify V(V) is to reduce it to V(IV), which precipitates and can be readily removed from the water. The bioreduction of V(V) in a contaminated groundwater was investigated using autohydrogentrophic bacteria and hydrogen gas as the electron donor. Compared with the previous organic donors,H2 shows the advantages as an ideal electron donor, including nontoxicity and less production of excess biomass. V(V) was 95.5% removed by biochemical reduction when autohydrogentrophic bacteria and hydrogen were both present, and the reduced V(IV)precipitated, leading to total-V removal. Reduction kinetics could be described by a first-order model and were sensitive to p H and temperature, with the optimum ranges of p H 7.5–8.0 and 35–40°C, respectively. Phylogenetic analysis by clone library showed that the dominant species in the experiments with V(V) bioreduction belonged to theβ-Proteobacteria. Previously known V(V)-reducing species were absent, suggesting that V(V)reduction was carried out by novel species. Their selective enrichment during V(V)bioreduction suggests that Rhodocyclus, a denitrifying bacterium, and Clostridium, a fermenter known to carry out metal reduction, were responsible for V(V) bioreduction.     

Brazil's mineral development: Potential and problems

Although Brazil is well endowed with natural resources, some of these are unexploited due to poor communications and political instability. The authors review present government policy and the situation with regard to oil and gas, iron ore, manganese and steel and other minerals, and conclude that Brazil has a bright economic future.