Melt Compounded Blends of Short and Medium Chain-Length Poly-3-hydroxyalkanoates

Blends of poly-3-hydroxybutyrate with an elastomeric medium-chain-length poly-3-hydroxyalkanoate (MCL-PHA), containing 98 mol% 3-hydroxyoctanoate and 2 mol% 3-hydroxyhexanoate (referred to as PHO), were prepared by melt compounding. Coarsening of the droplet-matrix morphology of the blends was noted as the PHO content increased beyond 5 wt%; this was attributed to the significant viscosity mismatch between the components. Addition of PHO improved the thermal stability of the blends, reduced their crystallinity and resulted in shifts in their melting and crystallization temperatures. The blends had improved tensile strain at break. The unnotched impact strength showed a threefold increase at 30 wt% PHO content. Cross-linking of PHO using a peroxide initiator increased its viscosity, thus improving the morphology and mechanical properties of the blends.     

Flux Force Condensation Aspirative Wet Scrubbing of Submicron Particles

A novel aspirative wet scrubber system makes use of condensation forces to enhance fine particulate collection. A pressure gain of 2 to 4 inches, W.C. is generated by the system and total water pump power requirements for multistage systems are 2 horsepower per thousand scfm. of gas throughput. No fans or blowers are utilized. When scrubbing hot combustion products carrying 0.1 to 6.0 micron metal oxide particles from a kiln, total collection efficiency was 99.4%. Collection of fly ash, in the particle size range 0.1 to 10 microns, has been measured at 99.5% efficiency.     

An Efficient Gaussian-Plume Multiple-Source Air Quality Algorithm

The information presented in this paper is directed to air pollution scientists with an interest in applying air quality simulation models. RAM is the three letter designation for this efficient Gaussian-plume multiple-source air quality algorithm. RAM is a method of estimating short-term dispersion using the Gaussian steady-state model. This algorithm can be used for estimating air quality concentrations of relatively stable pollutants for averaging times from an hour to a day in urban areas from point and area sources. The algorithm is applicable for locations with level or gently rolling terrain where a single wind vector for each hour is a good approximation to the flow over the source area considered. Calculations are performed for each hour. Hourly meteorological data required are wind direction, wind speed, stability class, and mixing height. Emission information required of point sources consists of source coordinates, emission rate, physical height, stack gas volume flow and stack gas temperature. Emission information required of area sources consists of south-west corner coordinates, source area, total area emission rate and effective area source height. Computation time is kept to a minimum by the manner in which concentrations from area sources are estimated using a narrow plume hypothesis and using the area source squares as given rather than breaking down all sources to an area of uniform elements. Options are available to the user to allow use of three different types of receptor locations: 1 ) those whose coordinates are input by the user, 2) those whose coordinates are determined by thé model and are downwind óf significant point and area sources where maxima are likely to occur, and 3) those whose coordinates are determined by the model to give good area coverage of a specific portion of the region. Computation time is also decreased by keeping the number of receptors to a minimum.     

Comment on “A Comparative Validation of the RAM and PTMTP Models for Short-Term S02 Concentrations in Two Urban Areas”

The purpose of this paper is to describe oxidant production and transport along the western shore of Lake Michigan. Air quality and meteorological data were collected in this area of the midwest during the summers of 1976–1978 using a ground-based laboratory and an Instrumented aircraft. Ozone, oxides of nitrogen, hydrocarbons (both total and individual), halocarbons, and numerous meteorological parameters were monitored continuously at the ground site near Kenosha, WI. Aircraft measurements included ozone, oxides of nitrogen, condensation nuclei, visual range (nephelometer), sulfur dioxide, temperature, and relative humidity.     

Using Farmers’ Actions to Measure Crop Loss Due to Air Pollution

The effects of ozone on the profitability of Illinois cash grain farms is investigated by utilizing a profit function framework. This approach uses individual farms as the observational unit so the data are generated under field conditions. Hence, experimental plot data are not used although results from past biological experiments are utilized to frame initial hypotheses and for evaluation of the estimated model. This study demonstrates the benefits of combining economic data and biological science results to estimate the economic reactions of producers in terms of input and output (production) response to an ambient environmental characteristic.

A time series of cross sectional data on cash grain farms in Illinois is used to estimate two profit functions. Ozone data are measured on a growing season basis by county. The estimated model shows ozone has a negative effect on profits. Increases in ozone levels tend to depress output levels and lessen the demand for variable inputs. Additionally, a production function is derived from one of the profit functions. The impact of ozone is found to be in general agreement with dose-response data obtained in Illinois by plant scientists.     

Sustainable Development by Design: Review of Life Cycle Design and Related Approaches

Abstract

The quality of stationary source emission factors is typically described using data quality ratings, which provide no quantification of the precision of the emission factor for an average source, nor of the variability from one source to another within a category. Variability refers to actual differences caused by differences in feedstock composition, design, maintenance, and operation. Uncertainty refers to lack of knowledge regarding the true emissions. A general methodology for the quantification of variability and uncertainty in emission factors, activity factors, and emission inventories (EIs) is described, featuring the use of bootstrap simulation and related techniques. The methodology is demonstrated via a case study for a selected example of NO_x emissions from coal-fired power plants. A prototype software tool was developed to implement the methodology. The range of interunit variability in selected activity and emission factors was shown to be as much as a factor of 4, and the range of uncertainty in mean emissions is shown to depend on the interunit variability and sample size. The uncertainty in the total inventory of ?16 to +19% was attributed primarily to one technology group, suggesting priorities for collecting data and improving the inventory. The implications for decision-making are discussed.     

Development of cleaner-burning brick kilns in Ciudad Juarez, Chihuahua, Mexico

The following results provide a comparison between net airborne contamination produced by the traditional form of kiln used in Northern Mexico and by those modified according to a design by Dr. Robert Marquez. What has become known as the MK style kiln was intended to significantly reduce contaminant emissions. The concept involves covering the kiln with a dome and channeling the output of an active kiln through a second, identical loaded kiln for its additional filtration of the effluents. Kilns of a pair are connected via clay brick channels. The roles are reversed after the initial kiln is refilled. Significant reductions in the particulate and gaseous emissions were achieved in the prototype system, but a connectional problem with recent kiln pairs has also limited the degree of operational success. The problem did not mask the potential of the MK kiln, as will be shown. Additional anticipated benefits to the owners of MK kilns, such as reduced operating cycles and decreased quantities of fuel, also have been verified. Key measurements made during all of the burns were of aerosol densities and buoyancies in the flues, kiln temperatures, and, on a number of occasions, chemical analyses of both aerosol and gaseous effluents. Continuous time histories of aerosol densities for most burns (of a total of -40) provide a basis for examining features and the effects of differing styles of operation with respect to burn efficiency and net contaminant masses. Covering the active kiln with a dome produces a net reduction in dry aerosol effluent mass of a factor between 5 and 10, whereas the addition of a filter kiln produces a net reduction of about a factor of 2. The use of used motor oil as a fuel further reduced aerosol contamination by -1 order of magnitude.     

Identifying potential receptors and routes of contaminant exposure in the traditional territory of the Ouje-Bougoumou Cree: Land use and a geographical information system

Great concern has been raised with respect to the 13 traplines that constitute the traditional territory of the Ouje-Bougoumou Cree located in the James Bay region of northern Quebec, Canada, with respect to mine wastes originating from three local mines. As a result, an “Integrative Risk Assessment” was initiated consisting of three interrelated components: a comprehensive human health study, an assessment of the existing ecological/environmental database, and a land use/potential sites of concern study. In this paper, we document past and present land use in the traditional territory of the Ouje-Bougoumou Cree for 72 heads of households, including 13 tallymen, and use a Geographic Information System (GIS) to layer harvest/hunting and gathering/collecting data over known mining areas and potential sites of concern. In this way, potential receptors of contamination and routes of human exposure were identified. Areas of overlap with respect to land use activity and mining operations were relatively extensive for certain harvesting activities (e.g., beaver, Castor canadensis and various species of game birds), less so for fish harvesting (all species) and water collection, and relatively restrictive for large mammal harvesting and collection of firewood (and other collection activities). Potential receptors of contaminants associated with mining activity (e.g., fish and small mammals) and potential routes of exposure (e.g., ingestion of contaminated game and drinking of contaminated water) were identified.     

Performance of wastewater subsurface drip emitters at low and normal pressure.

Subsurface drip distribution is an important on-site wastewater treatment technique widely used with various soil types and restricted site conditions. This study evaluated the performance of five subsurface wastewater drip products under eight pressures, ranging from 0 to 310 kPa. Results showed that Netafim Bioline pressure-compensating emitters (Netafim Irrigation Inc., Fresno, California) had an application uniformity coefficient of 95% and a coefficient of variance (C(v)) of 4.9%. The average uniformity coefficient of Geoflow Wasteflow products (Geoflow USA, Charlotte, North Carolina) was 94.4%, with a C(v) value of 6.8%. Flowrate and pressure relationships were developed by analyzing low and normal operational pressure ranges, and R-square values ranged from 1.000 to 0.301. Geoflow pressure-compensating products were non-pressure-compensating emitters under low pressure. Netafim pressure-compensating emitters were partially pressure-compensating under low pressures. In normal operational pressure ranges, both Geoflow and Netafim products were fully pressure-compensating. Netafim pressure-compensating products were characterized as pressure-compensating over the full range of operational pressures.