A Comparison of Three Methods to Collect Submerged Aquatic Vegetation in a Shallow Lake

Two boat-based and one in-water sampling method have been used to collect submerged aquatic vegetation (SAV) as part of a long-term monitoring program in Lake Okeechobee, Florida, USA. The boat-based methods consisted of collecting SAV with a ponar dredge, used only to collect Chara, and an oyster tongs-like rake apparatus, used to collect all SAV. The in-water method involved use of a 0.5 m² PVC quadrat frame deployed by a diver. During summer 2002, SAV biomass samples were collected using all three methods at various sites in the lake to compare between-methods sampling precision. Sites used for these comparisons were selected based on plant type, plant density and sediment type. Statistical comparisons indicated that there were significant (p ≤ 0.05) biomass differences in 8 of 15 possible pairwise comparisons between sampling method biomass means. In four of the eight comparisons, significantly higher biomass mean values were obtained using the quadrat frame. In three of the remaining four comparisons, significantly higher biomass mean values were obtained with the rake apparatus. For the fourth comparison, a significantly higher biomass mean value was obtained with the ponar dredge. Three of the four relationships between SAV biomass collected by the rake and the quadrat and the rake and the quadrat/ponar dredge were statistically significant, linear and explained between 67 and 78% of the biomass variability. There were no significant differences between regression coefficients or elevations for these relationships, therefore these regressions estimated the same population regression. The population regression coefficient was 0.95, suggesting that the quadrat and ponar over-sampled relative to the rake, but the amount of this over-sampling was very small. Since there was no consistent pattern in the sampling method which yielded the significantly different biomass values and there were no significant differences in sampling precision across a range of plant species, plant densities and two sediment types, the boat-based rake method appears to be a suitable replacement for the previously used ponar dredge and quadrat methods, when in-lake measurements are not practical.     

Developing an Ecological Land Classification for the Fundy Model Forest,southeastern New Brunswick,Canada

The methodology for developing and mapping a hierarchical Ecological Land Classification (ELC) is presented. The classification provided a systematic methodology that explained the distribution and composition of southern New Brunswick's forested landscape. The nested structure of the ELC identified and provided a hierarchical linkage between ecosystems from the size of forest stands to climate regions. This framework made the collection and analysis of data efficient and gave confidence that tree species distributions, which were central to understanding the influence of abiotic factors on the forest systems, were controlled by the factors examined at each level of the hierarchy. This ELC methodology, developed for the Fundy Model forest, was successful in describing and mapping the Climate, Geomorphologic, and Regolith controlled forest ecosystems. Preliminary classification indicates that spatial referencing of the Site Level is achievable.     

A comparison of X-ray fluorescence and wet chemical analysis for lead on air filters from different personal samplers used in a bronze foundry

Portable X-ray fluorescence (XRF) technology may provide faster turn-around without compromising accuracy when assessing personal exposures to metals such as lead, but it has only been tested in limited field environments. This study is part of a series, where different sampler types are used to collect airborne lead in different environments for presentation to a portable XRF analyzer. In this case personal samples were taken at a bronze foundry where lead is added to an alloy of copper, zinc and iron to improve casting, using the closed-face 37 mm cassette, the 37 mm GSP or "cone" sampler, the 25 mm Institute of Occupational Medicine (IOM) inhalable sampler, the 25 mm Button sampler, and the open-face 25 mm cassette. Mixed cellulose-ester filters were used in all samplers. Following XRF analysis the samples were extracted with acid and analyzed by inductively coupled plasma optical emission spectroscopy (ICP). For lead, all five samplers gave correlations (r(2)) greater than 0.9 between the two analytical methods over the entire range of found lead mass, which encompassed both the action level and the permissible exposure limit enforced in the USA by the Occupational Safety and Health Administration (OSHA). However, a correction was required to adjust linear regression trendlines to give a 1 : 1 correlation for the average of three readings across the GSP sampler, and a similar correction was required for the single readings from the IOM sampler and the 25 mm filter cassette. The bias possibly is due to interference from other metals, possibly copper which can absorb the fluorescent radiation of lead. In the case of the Button sampler, the bias is larger, indicating a further source of error, perhaps due to the thickness of the deposit. However, in all cases, correction of the lead results did not greatly affect the overall percentage of samples where the XRF result was within 25% of the ICP result, although it did improve the overall accuracy of the results. The GSP, IOM and Button samplers are suitable candidates for further evaluation as compatible with on-site XRF analysis for lead and other metals. It is important to check carefully factory pre-set instrument calibrations, as a bias in the calibration for copper was observed.     

Potential for reducing indoor styrene exposure from copied paper through use of low-emitting toners

Tests were conducted using 53-L dynamic chambers to determine airborne styrene emission rates over time from freshly copied paper. Copies were produced on a single photocopier using two toners manufactured for this copier but having different styrene contents. The resulting emission models were used to predict whether indoor styrene concentrations resulting from copied paper in a typical office might be significantly reduced by use of a low-emitting toner for a given copier. The styrene emissions were best represented by either a 3rd-order decay model or by a power law model having an exponent between 0.3 and 0.5 (R2 = 0.94-0.99). The two toners resulted in copied paper having significantly different styrene emissions (p < 0.01), with unit mass emissions over 1000 hr being nine times greater with the higher-emitting toner. But copied paper is predicted to produce peak indoor styrene concentrations in a typical office no more than 1% of the World Health Organization health-based guideline. Thus, for the toners considered here, indoor styrene exposures from copied paper appear to be too limited to provide incentive for switching to the lower-emitting toner. The ability to generalize these conclusions is limited by the fact that only one copier and two toners could be tested.     

Yard waste compost as a stormwater protection treatment for construction sites.

Runoff water quality improvement from three yard waste compost erosion control treatments were compared with two conventional treatments and an untreated control on plots of 3:1 slope during two growing seasons, using natural events and simulated rainfall. Runoff volume, suspended solids, nutrients, biomass, turf shear strength, and turfgrass color scale were monitored. The most effective compost treatment, a 5-cm thick blown compost blanket, produced 12.7 times less runoff and 9.8 times less sediment load than a straw mat and silt fence treatment. The compost treatments generated eight times more biomass than the straw mat treatments. Root development was significantly better on the compost treatments based on turf shear strength measurements. Tilled-in compost was not as effective as a compost blanket at reducing sediment loss, particularly before the establishment of grass on the plot. The cost of compost treatments was similar to that of straw mat with silt fence treatments.     

Analysis of a summertime PM2.5 and haze episode in the mid-Atlantic region

Observations of the mass and chemical composition of particles less than 2.5 microm in aerodynamic diameter (PM2.5), light extinction, and meteorology in the urban Baltimore-Washington corridor during July 1999 and July 2000 are presented and analyzed to study summertime haze formation in the mid-Atlantic region. The mass fraction of ammoniated sulfate (SO4(2-)) and carbonaceous material in PM2.5 were each approximately 50% for cleaner air (PM2.5< 10 microg/m3) but changed to approximately 60% and approximately 20%, respectively, for more polluted air (PM2.5>30 microg/m3). This signifies the role of SO4(2-) in haze formation. Comparisons of data from this study with the Interagency Monitoring of Protected Visual Environments network suggest that SO4(2-) is more regional than carbonaceous material and originates in part from upwind source regions. The light extinction coefficient is well correlated to PM2.5 mass plus water associated with inorganic salt, leading to a mass extinction efficiency of 7.6 +/- 1.7 m2/g for hydrated aerosol. The most serious haze episode occurring between July 15 and 19, 1999, was characterized by westerly transport and recirculation slowing removal of pollutants. At the peak of this episode, 1-hr PM2.5 concentration reached approximately 45 microg/m3, visual range dropped to approximately 5 km, and aerosol water likely contributed to approximately 40% of the light extinction coefficient.     

Assessment of municipal waste compost as a daily cover material for odour control at landfill sites

The ability of municipal waste compost as a daily cover material to reduce the odorous emissions associated with landfill surfaces was investigated. Trials were carried out using landfill gas, a certified sulphurous gas mix and ambient air as a control. Odorous gas was passed through portable test column filled with compost at different densities (590 kg/m3 and 740 kg/m3). Gas samples were taken from the inlet, outlet and at varying column depths and examined using a combination of sensory analysis (olfactometry) and a novel analytical method (Transportable Selected Ion Flow Tube--TSIFT). Results for the trials using landfill gas showed a 69% odour reduction (OU/m3) through the column for compost with a bulk density of 590 kg/m3, and a reduction of 97% using compost with a bulk density of 740 kg/m3. TSIFT analysis showed an overall decrease in the concentration of terpenes, and sulphurous compounds in the outlet gas from the column for both bulk densities. No significant trend could be identified for the concentrations at different depths within the column. Results show the ability of compost to reduce landfill odours under differing conditions. The inconclusive data provided by TSIFT analysis may be due to the analysis of compounds that are not contributing to odour, and thus highlights the potential for synergetic effects and the importance of sensory measurement when examining odorous emissions.     

人为因素对社会-生态系统脆弱性和恢复力影响的地理差异

横跨北极的地区,可更新资源和不可更新资源、人口密度、资产投资、住宅与交通基础设施的分布存在着很大差异,这些差异被公认为是研究当前和未来社会-生态系统变化的热点.由于当前政治和经济的稳定,芬诺斯堪的亚地区北部社会-生态系统呈现出相对良好的形势,而俄罗斯北部从苏联解体开始便一直经历着急速且消极的变化,这些变化反映了俄罗斯普遍存在的危机状态.北美洲虽然处在一个相对稳定有序的制度下,采取了一些措施用于防止和减轻与工业有关的环境退化,但大多即将出台的新发展计划仍将会显著扩大社会-生态系统受到潜在影响的空间范围.制度或管理条款与生态系统服务功能对环境变化的缓冲能力紧密相关.无论气候是否变暖,某些地理区域对外来破坏作用表现得特别脆弱,这有可能威胁到这些区域在将来提供产品和服务的能力.尽管某些地区的气候变化有可能会使这种形势恶化,但从长远来看,气候变化也有可能会使其恢复力得到加强.