On-road motor vehicle emissions and fuel consumption in urban driving conditions

This paper reports on the analysis of on-road vehicle speed, emission, and fuel consumption data collected by four instrumented vehicles. Time-, distance-, and fuel-based average fuel consumption, as well as CO, HC, NOx, and soot emission factors, were derived. The influences of instantaneous vehicle speed on emissions and fuel consumption were studied. It was found that the fuel-based emission factors varied much less than the time- and distance-based emission factors as instantaneous speed changed. The trends are similar to the results obtained from laboratory tests. The low driving speed contributed to a significant portion of the total emissions over a trip. Furthermore, the on-road data were analyzed using the modal approach. The four standard driving modes are acceleration, cruising, deceleration, and idling. It was found that the transient driving modes (i.e., acceleration and deceleration) were more polluting than the steady-speed driving modes (i.e., cruising and idling) in terms of g/km and g/sec. These results indicated that the on-road emission measurement is feasible in deriving vehicle emissions and fuel consumption factors in urban driving conditions.     

Phosphorus fractionation in lake sediments--lakes Volvi and Koronia, N. Greece

Sediments from two lakes, the meso-to-eutrophic Volvi and the hypertrophic Koronia, located in N. Greece were examined on the basis of P-fractionation. In both lakes, the rank order of P-fractions was HCl-P > NaOH-P > BD-P > NH4Cl-P. The loosely sorbed phosphorus (NH4Cl-P) represented < 1% of the sedimentary inorganic phosphorus, while the reductant phosphorus (BD-P) ranged 5-6%. The calcium bound phosphorus (HCl-P) showed considerable contribution (59-74%) to the sedimentary inorganic P-loads. The metal oxide bound phosphorus (NaOH-P) was higher in the hypertrophic (30-35%) than in the meso-to-eutrophic system (19-28%). Fine-sized sediments exhibited significantly higher concentrations of HCl-P in Volvi and NH4Cl-P in Koronia. Sampling month had significant effect in variance of most P-fractions and other sediment features in both lakes. Use was also made of multivariate statistics to identify the factors which influence the sedimentary phosphorus. NaOH-P was the most reactive fraction in Lake Volvi. Iron compounds and organic matter seem to play a significant role in regulating this labile P-budget. NH4Cl-P was the more reactive fraction in Lake Koronia which was influenced by sedimentation of P-absorbed on clay/silt fine particles.     

Nitrogen balance and groundwater nitrate contamination: comparison among three intensive cropping systems on the North China Plain

The annual nitrogen (N) budget and groundwater nitrate-N concentrations were studied in the field in three major intensive cropping systems in Shandong province, north China. In the greenhouse vegetable systems the annual N inputs from fertilizers, manures and irrigation water were 1358, 1881 and 402 kg N ha(-1) on average, representing 2.5, 37.5 and 83.8 times the corresponding values in wheat (Triticum aestivum L.)-maize (Zea mays L.) rotations and 2.1, 10.4 and 68.2 times the values in apple (Malus pumila Mill.) orchards. The N surplus values were 349, 3327 and 746 kg N ha(-1), with residual soil nitrate-N after harvest amounting to 221-275, 1173 and 613 kg N ha(-1) in the top 90 cm of the soil profile and 213-242, 1032 and 976 kg N ha(-1) at 90-180 cm depth in wheat-maize, greenhouse vegetable and orchard systems, respectively. Nitrate leaching was evident in all three cropping systems and the groundwater in shallow wells (<15 m depth) was heavily contaminated in the greenhouse vegetable production area, where total N inputs were much higher than crop requirements and the excessive fertilizer N inputs were only about 40% of total N inputs.     

Effect of applying chemical fertilizers on forms of lead and cadmium in red soil

A three-month incubation study was undertaken to examine the influence of N, P and K on the various forms (soluble plus exchangeable (SE), weakly specifically adsorbed (WSA), Fe-Mn oxides bound (OX), organic matter complexed (OM) and residual fractions (RES)) of lead (Pb) and cadmium (Cd) in a red soil. Application of urea at the rate of 200 mg N/kg significantly lowered the SE fraction, but raised the WSA or OX fraction of both metals. Supply of 80 mg P/kg caused a decrease in the SE fraction of the two metals. The WSA fraction of Pb was reduced, whereas that of Cd increased by adding P. However, addition of 100 mg K/kg led to an increase in the SE fraction, but a decrease in the WSA fraction of Pb and Cd. Applying chemical fertilizers had no significant consistent influences on the other fractions of metals. These findings suggest that in heavy metal contaminated red soil, applying fertilizers does not only provide plant nutrients, but may also change the speciations and thus biovailability of heavy metals.     

Degradation of ethinyl estradiol by nitrifying activated sludge

Degradation of ethinyl estradiol (EE2) by nitrifying activated sludge was studied with micro-organisms grown in a reactor with feedback of sludge fed with only a mineral salts medium containing ammonium as the sole energy source. Ammonium was oxidised by this sludge at a rate of 50 mg NH4+ g(-1) DW h(-1). This activated sludge was also capable of degrading EE2 at a maximum rate of 1 microg g(-1) DW h(-1). Using sludge with an insignificant nitrifying capacity of 1 mg NH4+ g(-1) DW h(-1), no degradation of EE2 was detected. Oxidation of EE2 by nitrifying sludge resulted in the formation of hydrophilic compounds, which were not further identified. Most probably degradation by nitrifying sludge results in a loss of estrogenic activity, as hydroxylated derivatives of EE2 are known to have a substantially lower pharmacological activity than EE2.     

Effects of bacterial activities on the release of heavy metals from contaminated dredged sediments

The potential impact of indigenous bacterial processes on the release of heavy metals from dredged sediment deposits was investigated. Batch re-suspension experiments were conducted in order to investigate the release of Zn, Cd, Cu and Pb from a polluted anoxic sediment submitted to oxidative perturbations. The concentrations of heavy metals, sulphate and dissolved organic carbon (DOC) were periodically recorded, and cell counts were performed to follow the evolution of several bacterial species. The specific effects of microbial processes were quantified by performing re-suspension assays on sterilised samples. Moreover, the effect of an initial acidification of the system was studied. The results showed that metal release was mainly due to oxidation of sulphide minerals contained in the sediment. Sulphur-oxidising bacteria such as Acidithiobacillus thiooxidans were identified to play a major role in the process, by enhancing the oxidation kinetic. However, the acid production resulting from these reactions was almost totally buffered by the dissolution of the calcite present in the sediment. Copper was released to a lesser extent, and a strong association with organic matter was observed. Lead was not observed in solution, because of its low solubility at neutral conditions and of its re-adsorption on the solid phase. The initial acidification of the system resulted in an faster growth of the acidophilic A. thiooxidans. A subsequent pH drop originating from microbial processes was then observed during the first stages of the experiment. As a consequence, drastic increases in metal (Zn, Cd) release were observed.     

Evaluation of ecological disturbance and intrinsic bioremediation potential of pulp mill-contaminated lake sediment using key enzymes as probes

A rapid protocol was developed to measure 10 different enzymic activities from a large number of 1-cm-sliced freshly collected lake sediments. Layers heavily polluted by organic halogens (4900 mg Cl kg(-1)) revealed severe depression of phosphatase, sulfatase, leucine-aminopeptidase, chitinase, acetate esterase and butyrate esterase activities as compared to layers above and below the most polluted zone. alpha-Glucosidase, beta-glucosidase, beta-xylosidase and palmitate esterase were less affected. Methane oxidation potential was dramatically depressed in the polluted strata whereas tetrachloromethane dehalogenating activity was observed in the polluted sediment only. The sediment layers formed after the chlorine discharges into the lake had diminished to 1/10, and showed restoration of the activities close to those observed in non-recipient sediment, in spite of the persisting presence of >1000 mg of organic chlorine (kg dry wt)(-1). We conclude that certain enzymic activities involved in breakdown or oxidation of organic matter in the sediments are useful probes for assessing the degree of ecological damage and its potential for restoration in recipient lakes of industrial discharges.     

Removal of nitrogen and phosphate from wastewater by addition of bittern

Removal of nitrogen and phosphate through crystallization of struvite (MgNH(4)PO(4).6H(2)O) has gained increasing interest. Since wastewaters tend to be low in magnesium relative to ammonia and phosphates, addition of this mineral is usually required to effect the struvite crystallization process. The present study evaluated the feasibility of using bittern, a byproduct of salt manufacture, as a low-cost source of magnesium ions. High reaction rates were observed; the extent of nitrogen and phosphorus removals did not change beyond 10 min. Phosphorus removals from pure solutions with bittern added were equivalent to those obtained with MgCl(2) or seawater. Nitrogen removals with bittern were somewhat lower than with the alternate Mg(2+) sources, however. Application of bittern to biologically treated wastewater from a swine farm achieved high phosphate removal, but ammonia removals were limited by imbalance in the nitrogen:phosphorus ratio.     

Diflubenzuron residue and persistence on an oak forest after aerial application

Abstract

A twenty hectare forest block in central Pennsylvania was aerially sprayed with diflubenzuron (Dimilin 25W®) at the dose of 33.23g A.I./ha in 9.4 litres/ha. Leaf samples were collected from the upper and lower canopies of 27 oaks and understory within this block on the day of spray, May 29, 1991. Canopy leaves were also collected on May 31, June 10, July 29 and September 26, 1991.

Recovery of diflubenzuron residues on fortified canopy‐leaf and litter‐leaf samples using analytical techniques employed in this study averaged 87.4% (SE = 7.5%) and 66.2% (SE = 8.2%), respectively.

On the day of spray, diflubenzuron residues on the upper canopy, lower canopy and understory averaged 81.18, 39.65 and 8.35 ng/cm², respectively. Diflubenzuron residues on canopy‐leaf samples collected 2, 12, 61 and 120 days post‐spray averaged 14.83 (SE = 10.19), 16.75 (SE = 9.95), 12.84 (SE = 8.25) and 11.20 (SE = 7.52) ng/cm², respectively. Diflubenzuron residues on litter‐leaf samples collected after leaf senescence ‐ 169 and 323 days post spray contained measurable amounts of diflubenzuron in 51 and 59% of the samples, respectively. Of the samples with measurable amounts of diflubenzuron, residues averaged 1.36 (SE = 2.44) and 0.65 ng/cm² (SE = 0.73) respectively.