Ventilation requirements in occupied spaces during smoking and nonsmoking occupancy

Ventilation requirements in occupied spaces have traditionally derived largely from odor control. The requirements have rested on the notion that an environment that seems subjectively acceptable to a visitor will in fact be healthful and comfortable for both visitor and occupant alike. Ventilation requirements have derived secondarily from criterion concentrations of notable contaminants (e.g., carbon dioxide). The present investigation looked again at both sensory (odor, irritation) and physical criteria of acceptability, paying particular attention to the difference between smoking and nonsmoking occupancy in a well-controlled environmental chamber. More than 200 persons (visitors) made judgments of odor intensity and acceptability under various conditions of occupancy (up to 12 nonsmoking occupants; a temperature of up to 25.5°C; up to 16 cigarettes smoked per hour). The results implied that under nonsmoking conditions and moderate humidity only about 7.5 cfm (3.8 L sec⁻¹) of fresh air per occupant sufficed to satisfy visitors, but that under smoking conditions at least 5 times as much fresh air is necessary. Our estimate of ventilation requirements for smoking were derived in part from measurements of carbon monoxide and total suspended particulate (TSP) mass concentration. Levels of TSP achieved during realistic smoking and ventilation rates exceeded levels deemed acceptable outdoors. Surfaces in the chamber played an important role in the elimination of particles, presumably via adsorption. Use of an electrostatic precipitator could keep TSP levels under control. Nevertheless, it remains to be seen whether control of TSP will eliminate the need for enormous ventilation for odor control during smoking occupancy.     

A new method to assess mercury emissions: a study of three coal-fired electric-generating power station configurations

U.S. Environmental Protection Agency (EPA) Method 7473 for the analysis of mercury (Hg) by thermal decomposition, amalgamation, and atomic absorption spectroscopy has proved successful for use in Hg assessment at coal-fired power stations. In an analysis time of approximately 5 min per sample, this instrumental methodology can directly analyze total Hg--with no discrete sample preparation--in the solid matrices associated with a coal-fired power plant, including coal, fly ash, bottom ash, and flue gas desulfurization (FGD) material. This analysis technique was used to investigate Hg capture by coal combustion byproducts (CCBs) in three different coal-fired power plant configurations. Hg capture and associated emissions were estimated by partial mass balance. The station equipped with an FGD system demonstrated 68% capture on FGD material and an emissions estimate of 18% (11 kg/yr) of total Hg input. The power plant equipped with low oxides of nitrogen burners and an electrostatic precipitator (ESP) retained 43% on the fly ash and emitted 57% (51 kg/yr). The station equipped with conventional burners and an ESP retained less than 1% on the fly ash, emitting an estimated 99% (88 kg/yr) of Hg. Estimated Hg emissions demonstrate good agreement with EPA data for the power stations investigated.     

Determination and evaluation of hexavalent chromium in power plant coal combustion by-products and cost-effective environmental remediation solutions using acid mine drainage

The chromium species leaching from a coal combustion fly ash landfill has been characterized as well as a novel approach to treat leachates rich in hexavalent chromium, Cr(VI), by using another natural waste by-product, acid mine drainage (AMD), has been investigated during this study. It is observed that as much as 8% (approximately 10 microg g(-1) in fly ash) of total chromium is converted to the Cr(VI) species during oxidative combustion of coal and remains in the resulting ash as a stable species, however, it is significantly mobile in water based leaching. Approximately 1.23 +/- 0.01 microg g(-1) of Cr(VI) was found in the landfill leachate from permanent deposits of aged fly ash. This study also confirmed the use of AMD, which often is in close proximity to coal combustion by-product landfills, is an extremely effective and economical remediation option for the elimination of hexavalent chromium in fly ash generated leachate. Speciated isotope dilution mass spectrometry (SIDMS), as described in EPA Method 6800, was used to analytically evaluate and validate the field application of the ferrous iron and chromate chemistry in the remediation of Cr(VI) runoff.     

Belief Networks: A Framework for the Participatory Development of Natural Resource Management Strategies

Successful long-term management of natural resources requires the development of strategies which recognise the constraints pertaining to the environmental system and can therefore be realistically expected to work. This paper presents a new technique for strategy formulation using belief networks, a framework based on Bayesian probability calculus that supports the investigation of complex environmental systems by the user and analysis of all constraints. While mathematical in nature, belief networks are superficially simple and allow concepts to be expressed in terms with which a wide range of user will be familiar. This offers a participatory approach to the development of management strategies through consideration of the impact of potential management options with consequent benefits for strategy implementation.