Greenhouse evaluation and environmental impact assessment of different urine-derived struvite fertilizers as phosphorus sources for plants

A selection of six urine-derived struvite fertilizers generated by innovative precipitation technologies was assessed for their quality and their effectiveness as phosphorus sources for crops. Struvite purity was influenced by drying techniques and magnesium dosage. In a greenhouse experiment, the urine fertilizers led to biomass yields and phosphorus uptakes comparable to or higher than those induced by a commercial mineral fertilizer. Heavy metal concentrations of the different struvite fertilizers were below the threshold limits specified by the German Fertilizer and Sewage Sludge Regulations. The computed loading rates of heavy metals to agricultural land were also below the threshold limits decreed by the Federal Soil Protection Act. Urine-derived struvite contributed less to heavy metal inputs to farmland than other recycling products or commercial mineral and organic fertilizers. When combined with other soil conditioners, urine-derived struvite is an efficient fertilizer which covers the magnesium and more than half of the phosphorus demand of crops.     

Changes in chromium distribution during the electrodialytic remediation of a Cr (VI)-contaminated soil

A laboratory study has been carried out to determine the feasibility of in situ remediation of chromium (VI)-contaminated soil using electrodialysis in relation to its speciation in soil. This technique is best suited for low-permeability soils or sediments, which may be difficult to remediate by other means and implies the application of a low-intensity direct current to the soil, which is separated from the electrode compartments by ion-exchange membranes. A clayey soil was prepared for use in the experiments and was characterized before being mixed with a solution of potassium dichromate for several days to produce a final Cr content of 4,056 mg/kg of soil dry wt. Remediation tests were carried out under constant-voltage conditions for periods of 7–14 days and the evolution of applied current to the cell, pH, and conductivity of the electrolytes were recorded periodically. Fractionation of chromium was determined for soil samples before and after remediation using a standardized four-step sequential extraction procedure (SEP) with acetic acid, hydroxylamine, hydrogen peroxide, and aqua regia solutions. Results show that chromium is mobilized from the most labile phases (soluble/exchangeable/carbonate). In a 15 V test, SEP results show that the amount of chromium extracted in the first step drops from 80% to 9%, but also that changes in the total chromium distribution occur during the treatment with some transferred to other soil phases that are more difficult to mobilize.     

Distributional impacts of climate change on basin communities: an integrated modeling approach

Regional Environmental Change - Agriculture is one of the most vulnerable economic sectors to the impacts of climate change, specifically those related with expected changes in water availability....     

Study of the operational conditions for anaerobic digestion of urban solid wastes

This paper describes an experimental evaluation of anaerobic digestion technology as an option for the management of organic solid waste in developing countries. As raw material, a real and heterogeneous organic waste from urban solid wastes was used. In the first experimental phase, seed selection was achieved through an evaluation of three different anaerobic sludges coming from wastewater treatment plants. The methanization potential of these sludges was assessed in three different batch digesters of 500 mL, at two temperature levels. The results showed that by increasing the temperature to 15 degrees C above room temperature, the methane production increases to three times. So, the best results were obtained in the digester fed with a mixed sludge, working at mesophilic conditions (38-40 degrees C). Then, this selected seed was used at the next experimental phase, testing at different digestion times (DT) of 25, 20 and 18 days in a bigger batch digester of 20 L with a reaction volume of 13 L. The conversion rates were registered at the lowest DT (18 days), reaching 44.9 L/kg(-1) of wet wasteday(-1). Moreover, DT also has a strong influence over COD removal, because there is a direct relationship between solids removal inside the reactor and DT.     

Sorption kinetics of chlortetracyline and tylosin on sandy loam and heavy clay soils

Antibiotics may appear in the environment when manure, sewage sludge, and other organic amendments are added to soils. There is concern that the presence of antibiotics in soils may lead to the development of antibiotic-resistant bacteria which may spread to the rest of the environment. This paper aims at evaluating the sorption kinetics of two antibiotics frequently used in pig production. The results indicate that sorption of chlortetracycline (CTC) and tylosin (TYL) in sandy loam and clay occurs very fast. More than 95% of the CTC adsorption is completed within 10 min on both soils and of TYL within 3 h. These results suggest that 24-h soil and antibiotic solution mixtures is enough for sorption studies. Also, there is less likelihood that these antibiotics will leach through soil and appear in the ground water since their sorption on soils is very high unless they are carried by soil particles through preferential flow. There was also no effect of soil sterilization on sorption kinetics of these antibiotics thus suggesting that there is minimal probability of the antibiotics degrading by microorganisms during 24- to 48-h adsorption studies.     

Environmental and human exposure assessment monitoring of communities near an abandoned mercury mine in the Philippines: a toxic legacy

Abandoned mines are an important global concern and continue to pose real or potential threats to human safety and health including environmental damage/s. Very few countries had government mine regulation and reclamation policies until the latter part of the century where legal, financial and technical procedures were required for existing mining operations. Major reasons for mine closure may be mainly due to poor economies of the commodity making mining unprofitable, technical difficulties and national security. If the mine is abandoned, more often than not it is the government that shoulders the burden of clean-up, monitoring and remediation. The topic of abandoned mines is complex because of the associated financial and legal liability implications. Abandoned mercury mines have been identified as one of the major concerns because of their significant long-term environmental problems. Primary mercury production is still ongoing in Spain, Kyrgzystan, China, Algeria, Russia and Slovakia while world production declined substantially in the late 1980s. In the Philippines, the mercury mine located southeast of Manila was in operation from 1955 to 1976, before ceasing operation because of the decline in world market price for the commodity. During this time, annual production of mercury was estimated to be about 140,000 kg of mercury yearly. Approximately 2,000,000 t of mine-waste calcines (retorted ore) were produced during mining and roughly 1,000,000 t of these calcines were dumped into nearby Honda Bay to construct a jetty to facilitate mine operations where about 2000 people reside in the nearby three barangays. In October, 1994 the Department of Health received a request from the Provincial Health Office for technical assistance relative to the investigation of increasing complaints of unusual symptoms (e.g. miscarriages, tooth loss, muscle weakness, paralysis, anemia, tremors, etc.) among residents of three barangays. Initial health reports revealed significant elevation of blood mercury levels exceeding the then recommended exposure level of 20ppb in 12 out of the 43 (27.9%) residents examined. The majority of the volunteers were former mine workers. In this study the abnormal findings included gingivitis, mercury lines, gum bleeding and pterydium. The most common neurologic complaints were numbness, weakness, tremors and incoordination. Anemia and elevated liver function tests were also seen in a majority of those examined. The assessment also revealed a probable association between blood mercury level and eosinophilia. The same association was also seen between high mercury levels and the presence of tremors and working in the mercury mine. To date, there are very limited environmental and health studies on the impact of both total and methylmercury that have been undertaken in the Philippines. Thus, this area of study was selected primarily because of its importance as an emerging issue in the country, especially regarding the combined effects of total and methylmercury low-dose and continuous uptake from environmental sources. At present the effects of total mercury exposure combined with MeHg consumption remain an important issue, especially those of low-dose and continuous uptake. Results of the study showed that four (4) species of fish, namely ibis, tabas, lapu-lapu and torsillo, had exceeded the recommended total mercury and methylmercury levels in fish (NV>0.5 microg/gf.w., NV>0.3 microg/gf.w., respectively). Saging and kanuping also exceeded the permissible levels for methylmercury. Total and methylmercury in canned fish, and total mercury in rice, ambient air and drinking water were within the recommended levels, however, additional mercury load from these sources may contribute to the over-all body burden of mercury among residents in the area. Surface water quality at the mining area, Honda Bay and during some monitoring periods at Palawan Bay exceeded total mercury standards (NV>0.002 ng/mL). Soil samples in two sites, namely Tagburos and Honda Bay, exceeded the EPA Region 9 Primary Remediation Goal recommended values for total mercury for residential purposes (NV>23 mg/kg). The hand to mouth activity among infants and children is another significant route for mercury exposure. Statistically significant results were obtained for infants when comparing the results after one year of monitoring for methylmercury levels in hair for both exposed and control sub-groups. Likewise, comparing the initial and final hair methylmercury levels among pregnant women/mothers in the exposed group showed statistically significant (p<0.05) results. Comparing the exposed and control sub-groups' mercury hair levels per sub-group showed statistically significant results among the following: (a) initial and final total mercury hair levels among children, (b) initial and final methylmercury hair levels among children, (c) final total mercury hair levels among pregnant women, (d) initial and final total mercury hair levels among mothers, and (e) initial and final methyl hair levels among mothers.     

Evaluation of modeling as a tool to determine the potential impacts related to drilling wastes in the Brazilian offshore

Numerical models that predict the fate of drilling discharges at sea constitute a valuable tool for both the oil industry and regulatory agencies. In order to provide reliable estimates, models must be validated through the comparison of predictions with field or laboratory observations. In this paper, we used the Offshore Operators Committee Model to simulate the discharges from two wells drilled at Campos Basin, offshore SE Brazil, and compared the results with field observations obtained 3 months after drilling. The comparison showed that the model provided reasonable predictions, considering that data about currents were reconstructed and theoretical data were used to characterize the classes of solids. The model proved to be a valuable tool to determine the degree of potential impact associated to drilling activities. However, since the accuracy of the model is directly dependent on the quality of input data, different possible scenarios should be considered when used for forecast modeling.     

Mathematical modelling as a tool for environmental evaluation of industrial sectors in Colombia

A general mathematical model has been developed as a tool for environmental evaluation of industrial chemical processes. This model is based on the life cycle assessment (LCA) methodology and includes a modular and cumulative conceptual approximation. Accordingly, the model considers the potential effects on the environment caused by mass, energy and exergy flows. For environmental loads related with mass flows, two main categories are defined: pollution and perturbation environmental effects. Whereas for the environmental effect associated with energy flows, a factor defined as “energy dissipation” is employed, and similarly for exergy flows, a “exergy destruction” parameter is used. The measurement unit employed throughout the model is expressed in terms of “potential environmental impact units/hour”. As an example study case, the integrated production chain (IPC) for nitric acid production in the Colombian context is evaluated. This particular IPC includes the ammonia production plant, energy plants and main process plant. The results demonstrate that for environmental perturbation effects based on mass flows, the main contribution in the IPC corresponds to the energy plants. In the case of pollution environmental loads, the principal contribution relates to ammonia production. Regarding environmental effects associated with energy flows, the highest “energy dissipation” factor corresponds to the main process, followed in order by the ammonia process. Finally, for the effect denominated as “exergy destruction”, it could be established that Colombian energy plants show the highest contribution in the IPC.     

Regional integration and local change: road paving, community connectivity, and social–ecological resilience in a tri-national frontier, southwestern Amazonia

Initiatives for global economic integration increasingly prioritize new infrastructure in relatively remote regions. Such regions have relatively intact ecosystems and provide valuable ecosystem services, which has stimulated debates over the wisdom of new infrastructure. Most prior research on infrastructure impacts highlights economic benefits, ecological damage, or social conflicts. We suggest a more integrative approach to regional integration by appropriating the concepts of connectivity from transport geography and social?Cecological resilience from systems ecology. Connectivity offers a means of observing the degree of integration between locations, and social?Cecological resilience provides a framework to simultaneously consider multiple consequences of regional integration. Together, they offer a spatial analysis of resilience that considers multiple dimensions of infrastructure impacts. Our study case is the southwestern Amazon, a highly biodiverse region which is experiencing integration via paving of the Inter-Oceanic Highway. Specifically, we focus on the ??MAP?? region, a tri-national frontier where Bolivia, Brazil, and Peru meet and which differs in the extent of highway paving. We draw on a tri-national survey of more than 100 resource-dependent rural communities across the MAP frontier and employ indicators for multiple dimensions of connectivity and social?Cecological resilience. We pursue a comparative analysis among regions and subregions with differing degrees of community connectivity to markets in order to evaluate their social?Cecological resilience. The findings indicate that connectivity and resilience have a multifaceted relationship, such that greater community connectivity corresponds to greater resilience in some respects but not others. We conclude by noting how our findings integrate those from heretofore largely disparate literatures on infrastructure. The integration of transport geography with resilience thought thus stands to advance the study of infrastructure impacts.