Vapor-Phase and Fine Particulate Matter Concentrations of Polycyclic Aromatic Hydrocarbons Measured during the Winter Months in a Northern Rocky Mountain Urban Airshed

Abstract

A fine particulate matter (PM_2.5) sampling program was conducted in Missoula, MT, to investigate both the particle and vapor phases of PM_2.5-associated polycyclic aromatic hydrocarbons (PAHs) found in a northern Rocky Mountain urban airshed. Twenty-four-hour samples were collected during the cold winter months of January through April 2002, when many of the more volatile organic components of PM_2.5 were expected to be found in the condensed particle form. To meet analytical detection limits, each of the 12 individual sample days were aggregated into four total filter and polyurethane foam (PUF) samples, respectively, with each aggregate containing 3 sample days. Quartz filter (particle-phase PAHs) and PUF (vapor-phase PAHs) aggregates were analyzed separately for 18 individual PAHs and phenolics by gas chromatography/mass spectrometry. Results showed that 87% of the PM_2.5-associated phenolics and PAHs measured in this study were found in the vapor phase. PM_2.5-associated gas/particle partition coefficients (K_p,2.5) ranged from 0 for the lighter phenolics and PAHs to ~0.1 for some of the heavier PAHs, such as fluoranthene and pyrene. Calculating K_p,2.5 for the heaviest measured PAHs was not feasible because of low or undetectable concentrations in the vapor phases of these compounds. Phenolics and two-ringed and three-ringed PAHs were found almost exclusively in the vapor phase. Four-ringed PAHs were distributed between the particle and vapor phases, with more mass measured in the vapor phase. Very little five-ringed and higher PAHs were measured from either the filter or PUF sampling medium. These results provide information on both the concentrations and different phases of PM_2.5-associated PAHs measured during the winter months in a northern Rocky Mountain urban airshed, when concentrations of PM_2.5 are generally at their highest compared with the rest of the year.     

An Inexpensive Dual-Chamber Particle Monitor: Laboratory Characterization

Abstract

In developing countries, high levels of particle pollution from the use of coal and biomass fuels for household cooking and heating are a major cause of ill health and premature mortality. The cost and complexity of existing monitoring equipment, combined with the need to sample many locations, make routine quantification of household particle pollution levels difficult. Recent advances in technology, however, have enabled the development of a small, portable, data-logging particle monitor modified from commercial smoke alarm technology that can meet the needs of surveys in the developing world at reasonable cost. Laboratory comparisons of a prototype particle monitor developed at the University of California at Berkeley (UCB) with gravi-metric filters, a tapered element oscillating microbalance, and a TSI DustTrak to quantify the UCB particle monitor response as a function of both concentration and particle size and to examine sensor response in relation to changes in temperature, relative humidity, and elevation are presented here. UCB particle monitors showed good linearity in response to different concentrations of laboratory-generated oleic acid aerosols with a coarse (mass median diameter, 2.1 µm) and fine (mass median diameter, 0.27–0.42 µm) size distributions (average r² = 0.997 ± 0.005). The photoelectric and ionization chamber showed a wide range of responses based on particle size and, thus, require calibration with the aerosol of interest. The ionization chamber was five times more sensitive to fine rather than coarse particles, whereas the photoelectric chamber was five times more sensitive to coarse than fine. The ratio of the response between the two sensors has the potential for mass calibration of individual data points based on estimated parameters of the size distribution. The results demonstrate the significant potential of this monitor, which will facilitate the evaluation of interventions (improved fuels, stoves, and ventilation) on indoor air pollution levels and research on the impacts of indoor particle levels on health in developing countries.     

Comparative Study of Spray Booth Filter System Efficiency

ABSTRACT

During recent years, greater emphasis has been placed on the control of particulate emissions from painting operations. This has gained more importance as more is learned about the potential release of toxic metals to the atmosphere from painting operations. This has led to queries about the efficiency of various painting arrestor systems to reduce particulate discharges to the atmosphere. Even more important is the capability of the arrestor systems to control PM₁₀ emissions.

In 1995, the U.S. Environmental Protection Agency initiated a study to evaluate various dry paint overspray arrestor systems. This study was designed to evaluate not only the total emissions control capability of the arrestor but also the PM₁₀ control capability of the various system designs. Paint overspray arrestor systems using five different filtration concepts or materials were selected. They include systems constructed of fiberglass, paper, Styrofoam, and cardboard materials. These systems used filtration techniques incorporating the following filtration phenomena and designs: cyclone, baffle, bag systems, and mesh systems.

The testing used an optical particle counting procedure to determine the concentration of particles of a given size fraction to penetrate a test arrestor system. The results of the testing indicated that there are significant differences in the efficiency of the tested system designs to capture and retain PM₁₀.

This paper summarizes the results of the research conducted to determine the capability of the arrestor systems to capture particulate of sizes down to approximately 1 μm in surface diameter.     

Numerical Simulation of the Thermal Destruction of Some Chlorinated C1 and C2 Hydrocarbons

We have numerically modeled the breakdown of small quantities of several chlorinated hydrocarbons (CH₃CI, CH₂CI₂, CHCI₃, CCI₄, C₂H₃CI, and C₂H₅CI) in a lean mixture of combustion products between 800 and 1480 K. This simulates the fate of poorly atomized waste in a liquid-Injection Incinerator. Kinetics calculations were performed using the CHEMKIN and SENKIN programs, with a reaction mechanism that was developed at Louisiana State University to model flat-flame burner experiments.

A 99.99-percent destruction efficiency was attained In one second at temperatures ranging from 1280 to 960 K, with CCI4 requiring the highest temperature for destruction and C₂H₅CI the lowest. For all compounds except C₂H₅CI, there was a range of temperatures at which byproducts accounted for several percent of the elemental chlorine at the outlet. The more heavily chlorinated compounds formed more byproducts even though the amount of elemental chlorine was the same in all cases. The sensitivity of results to residence time, equivalence ratio, temperature profile, and the presence of additional chlorine, was examined for the case of CHCI₃.     

Tracer Study In an Urban Valley

Results of a series of nighttime tracer experiments conducted during the Autumn of 1966 in the industrialized valley of Johnstown, Pa., are discussed. Quite atypical meteorology and dispersion occur within a classical drainage flow framework. An urban heat island effect is observed creating uniform temperature and wind structures within a layer of air flowing through the valley. Dispersion in the valley at night is comparable to that of neutral conditions over open country.     

Carbon Monoxide and Lead-An Environmental Appraisal

Because of the common source, lead and CO values in the atmosphere tend to behave in a similar manner. Thus, diurnal variations in these two pollutants show a pattern related to motor vehicle traffic flow. Also, the exposure to both vary by orders of magnitude with the highest being on the road (in the car) thus setting up special dosage situations. Community sources seem to affect background level at least based on fall-off with distance. There may be a relatively wider exposure of the general population to lead and CO. While the lead levels may not be increasing in the downtown portion of the central city proper, typical central city levels of several years ago may be more diffuse and spread out, thus occurring over increasingly large portions of the community. Similarly, there may be a wider exposure of the population to CO as the levels become more nearly uniformly high over a larger area. In addition, there may be problems of a shorter term exposure to high levels of CO in commuter traffic. This may be of consequence to selected types of drivers or passengers. Finally, it should also be noted that during air pollution episodes, CO levels appear to rise with no data currently available on changes in concomitant ambient lead levels.     

Cooling Towers and the Environment

Measurements of natural draft cooling tower plume behavior, as well as meteorological variables, were obtained from aircraft flights near major power plants of the American Electric Power System. Persistence of the visible plume to great distances depends essentially on ambient humidity. Atmospheric stability at plume elevation was also important. Cooling tower-induced fog at ground-level was never observed in any of the tests, and aerodynamic downwash of the visible plume was absent also. The cooling towers did cause modification of natural clouds and they occasionally shadowed some local areas from the sun. Merging of the stack and cooling tower plumes was a common occurrence.     

The impact of a standard enforcement safety belt law on fatalities and hospital charges in Ohio

Introduction

The purpose of this study was to analyze linked crash and hospital data to determine the effect that enactment of a standard enforcement safety belt law in Ohio would have on hospital charges and direct medical costs due to motor-vehicle crashes, focusing on the impact to the state's Medicaid system.

Method

The linkage and analysis was conducted as part of the Ohio Crash Outcome Data Evaluation System (CODES) program. Current safety belt usage in Ohio stands at 82% with its secondary enforcement safety belt law.

Results

Assuming an increase in usage to 92% through standard enforcement, over $15.3 million in medical costs to Medicaid for injuries that occur in a single year could be prevented over a 10-year period. Cumulative savings could reach more than $91.2 million during the 10-year period. In addition, 161 fatalities could have been prevented in one year had all unbelted occupants who sustained a fatal injury instead chosen to wear their safety belt.

Summary and Impact on Industry

Clearly, substantial progress can be made in reducing the number of deaths and injuries, as well as medical costs associated with motor-vehicle crashes, by strengthening safety belt laws and increasing safety belt usage in Ohio.