THE TENDENCY OF A NEW WATER DISINFECTANT TO PRODUCE TOXIC TRIHALOMETHANES1

A new organic N-chloramine disinfectant (3-chloro-4, 4-dimethyl-2-oxazolidinone, agent I) has been compared with calcium hypochlorite as to its tendency to react with organic matter in water to produce toxic trihalomethanes. Agent I reacts much less readily with organic demand than does calcium hypochlorite. This study shows that agent I should be safe to use as a disinfectant for water containing appreciable organic load in either sunlight or darkness. On the other hand, calcium hypochlorite may not be a satisfactory disinfectant from the toxicity standpoint for water which contains organic load which must be stored for extended time periods in either sunlight or darkness.     

What is Type A? A cognitive social learning model

In the past ten years or so, attempts have been made to understand better the essential nature of Type A. Yet, important questions remain as to exactly what the behaviour pattern is, how we can measure it reliably, and how we can help persons change their Type A behaviour as a means, it is hoped, of reducing their risk of CHD. Lack of a theoretically-based conceptual model of Type A is cited as one of the important reasons why serious conceptual; assessment, and treatment problems persist in this field. A recently developed model of Type A based on cognitive social learning theory is presented. The model focuses on the interplay among cognitive, behavioural, physiological, and environmental factors in the acquisition and maintenance of Type A behaviour. Personal beliefs and the fears they spawn are seen as forming the core of the behaviour pattern. Several of these beliefs are discussed. For instance, believing that one's personal worth is tied to one's tangible accomplishments is shown to explain the presence of many behaviours traditionally considered to constitute Type A. Environmental factors associated with the workplace are also discussed in terms of how they contribute to the persistence of Type A behaviour throughout adult life.     

Growth rate of the bathypelagic crustacean Gnathophausia ingens (Mysidacea: Lophogastridae). I. Dimensional growth and population structure

Gnathophausia ingens has 13 instars, each with a distinct range of sizes which does not overlap the sizes of adjacent instars. The intermolt interval, measured in the laboratory at 5.5°, 6.5° and 7.5°C, increases with increasing size and decreases with increasing temperature. At 5.5°C it varies from 166 days for the smallest individuals to 253 days for the oldest. The period of larval development in the marsupium of a female is estimated to be 530 days. The life span of females is estimated to be 2,950 days with the onset of reproduction at 2,400 days. It is sugquested that this species is semelparous. The population structure data suggest that there is low mortality through the first 7 instars, progressively higher mortality from Instar 8 through Instar 11, and slightly lower mortality in the remaining 2 instars. These life-history characteristics appear to be directed toward maximizing absolute fecundity (as opposed to time-specific fecundity) in a stable environment. These characteristics may have been selected for by low available food energy and made possible by the stability of the deep sea.     

Reporting progress on internationally designated sites: The periodic review of biosphere reserves

For sites designated within international networks, reporting processes have been established to ensure that these sites continue to exhibit their special characteristics and contribute to the goals of their respective network. One such network is the World Network of Biosphere Reserves (WNBR), composed of sites designated under UNESCO's Man and the Biosphere programme. This paper summarises the evolution of the concept and the realities of biosphere reserves since 1976; describes the introduction of the Statutory Framework for the WNBR, which formalised the concept and introduced a periodic review process to provide oversight of its implementation; evaluates the extent to which, since 1996, this process has been successful in achieving its aims; discusses changes which have been proposed and implemented; and provides suggestions for future action.     

A novel marine silk

The discovery of a novel silk production system in a marine amphipod provides insights into the wider potential of natural silks. The tube-building corophioid amphipod Crassicorophium bonellii produces from its legs fibrous, adhesive underwater threads that combine barnacle cement biology with aspects of spider silk thread extrusion spinning. We characterised the filamentous silk as a mixture of mucopolysaccharides and protein deriving from glands representing two distinct types. The carbohydrate and protein silk secretion is dominated by complex β-sheet structures and a high content of charged amino acid residues. The filamentous secretion product exits the gland through a pore near the tip of the secretory leg after having moved through a duct, which subdivides into several small ductules all terminating in a spindle-shaped chamber. This chamber communicates with the exterior and may be considered the silk reservoir and processing/mixing space, in which the silk is mechanically and potentially chemically altered and becomes fibrous. We assert that further study of this probably independently evolved, marine arthropod silk processing and secretion system can provide not only important insights into the more complex arachnid and insect silks but also into crustacean adhesion cements.     

Bridging the generation gap in plants: pollination, parental fecundity, and offspring demography

Despite extensive study of pollination and plant reproduction on the one hand, and of plant demography on the other, we know remarkably little about links between seed production in successive generations, and hence about long-term population consequences of variation in pollination success. We bridged this "generation gap" in Ipomopsis aggregata, a long-lived semelparous wildflower that is pollinator limited, by adding varying densities of seeds to natural populations and following resulting plants through their entire life histories. To determine whether pollen limitation of seed production constrains rate of population growth in this species, we sowed seeds into replicated plots at a density that mimics typical pollination success and spacing of flowering plants in nature, and at twice that density to mimic full pollination. Per capita offspring survival, flower production, and contribution to population increase (lambda) did not decline with sowing density in this experiment, suggesting that typical I. aggregata populations freed from pollen limitation will grow over the short term. In a second experiment we addressed whether density dependence would eventually erase the growth benefits of full pollination, by sowing a 10-fold range of seed densities that falls within extremes estimated for the natural "seed rain" that reaches the soil surface. Per capita survival to flowering and age at flowering were again unaffected by sowing density, but offspring size, per capita flower production, and lambda declined with density. Such density dependence complicates efforts to predict population dynamics over the longer term, because it changes components of the life history (in this case fecundity) as a population grows. A complete understanding of how constraints on seed production affect long-term population growth will hinge on following offspring fates at least through flowering of the first offspring generation, and doing so for a realistic range of population densities.     

The composition of PM10 as collected by a conventional TEOM, a modified TEOM and a Partisol gravimetric monitor at a kerbside site in the North East of England

The composition of airborne particulate matter sampled by a conventional TEOM, an experimental modified TEOM, operated at a lower temperature but fitted with a drier to remove moisture and a Partisol, installed at a kerbside site in the North East of England, has been investigated. The results indicate that there is a seasonal variation in the composition of PM(10) as sampled by the three monitors, with chloride concentration being significantly higher in the winter. The Partisol was found to sample a higher mass of chloride and nitrate, however the differences between the monitors was only significant for chloride. Both TEOM's were found to sample a greater mass of sulphate, although the variability in the data collected meant that significance of the results was not proven statistically. The range of artifacts associated with PM(10) monitors is reviewed. Difficulties in the interpretation of results due to the variable nature of airborne particulate matter and the ability of filter based systems to accurately represent the composition of atmospheric particles are considered.     

Green sand reclamation using a fluidized bed with an attrition nozzle

The objective of this study was to determine the technical feasibility of green sand reclamation using attrition in a gas–solid fluidized bed. Reclamation of foundry sand is becoming important as it may help solve concerns related to transportation and dumping of the used sand, and reduce production costs by recycling sand. The crucial step in green sand reclamation is the removal of small clay particles that are bound to the sand particles.For this study two different types of green sand were used and supplied by two different foundries. Tests were performed in a fluidized bed equipped with an attrition nozzle operating at pressures of either 350 or 550 kPa (50 or 80 psig). Attrition experiments for one green sand were performed on either unburned or burned (calcined) green sand, to determine the effect of prior calcination of the green sand on its reclamation potential by attrition. Calcination temperatures of over 700 °C were employed, and the results suggest that calcination facilitates the removal of clay from the green sand.Green sand was analyzed for clay and organic content, acid request, and particle size before and after attrition. Attriting calcined green sand produces the best results. Also experiments conducted at the highest attrition pressure of 550 kPa gave good results. According to the mass balance, the mass lost during the attrition process may be limited to less than 14%, and this could be considered acceptable. The volume of air required for the attrition nozzle is rather high and this may adversely affect the economics of the process.