Volatilization of contaminants from suspended sediment in a water column during dredging

Remedial dredging of contaminated bed sediments in rivers and lakes results in the suspension of sediment solids in the water column, which can potentially be a source for evaporation of hydrophobic organic compounds (HOCs) associated with the sediment solids. Laboratory experiments were conducted in an oscillating grid chamber to simulate the suspension of contaminated sediments and flux to air from the surface of the water column. A contaminated field sediment from Indiana Harbor Canal (IHC) and a laboratory-inoculated University Lake (UL) sediment, Baton Rouge, LA, were used in the experiments, where water and solids concentration and particle size distribution were measured in addition to contaminant fluxes to air. A transient model that takes into account contaminant desorption from sediment to water and evaporation from the water column was used to simulate water and sediment concentrations and air fluxes from the solids suspension. In experiments with both sediments, the total suspended solids (TSS) concentration and the average particle diameter of the suspended solids decreased with time. As expected, the evaporative losses were higher for compounds with higher vapor pressure and lower hydrophobicity. For the laboratory-inoculated sediment (UL), the water concentrations and air fluxes were high initially and decreased steadily implying that contaminant release to the water column from the suspended solids was rapid, followed by evaporative decay. For the field sediments (IHC), the fluxes and water concentrations increased initially and subsequently decreased steadily. This implied that the initial desorption to water was slow and that perhaps the presence of oil and grease and aging influenced the contaminant release. Comparison of the model and experimental data suggested that a realistic determination of the TSS concentration that can be input into the model was the most critical parameter for predicting air emission rates.     

The Composition of PM10 as collected by a Conventional TEOM, a Modified TEOM and a Partisol Gravimetric Monitor at a Kerbside Site in the North East of England

The composition of airborne particulate matter sampled by a conventional TEOM^®, an experimental modified TEOM, operated at a lower temperature but fitted with a drier to remove moisture and a Partisol^®, installed at a kerbside site in the North East of England, has been investigated. The results indicate that there is a seasonal variation in the composition of PM₁₀ as sampled by the three monitors, with chloride concentration being significantly higher in the winter. The Partisol was found to sample a higher mass of chloride and nitrate, however the differences between the monitors was only significant for chloride. Both TEOM's were found to sample a greater mass of sulphate, although the variability in the data collected meant that significance of the results was not proven statistically. The range of artifacts associated with PM₁₀ monitors is reviewed. Difficulties in the interpretation of results due to the variable nature of airborne particulate matter and the ability of filter based systems to accurately represent the composition of atmospheric particles are considered.     

A Multivariate Analysis of Biophysical Parameters of Tallgrass Prairie Among Land Management Practices and Years

Six treatments of eastern Kansas tallgrass prairie – native prairie, hayed, mowed, grazed, burned and untreated – were studied to examine the biophysical effects of land management practices on grasslands. On each treatment, measurements of plant biomass, leaf area index, plant cover, leaf moisture and soil moisture were collected. In addition, measurements were taken of the Normalized Difference VegetationIndex (NDVI), which is derived from spectral reflectance measurements. Measurements were taken in mid-June, mid-July and late summer of 1990 and 1991. Multivariate analysis of variance was used to determine whether there were differences in the set of variables among treatments and years. Follow-up tests included univariate t-tests to determine whichvariables were contributing to any significant difference. Results showed a significant difference (p < 0.0005) among treatments in the composite of parameters during each of the months sampled. In most treatment types, there was asignificant difference between years within each month. The univariate tests showed, however, that only some variables, primarily soil moisture, were contributing to this difference. We conclude that biomass and % plant cover show the best potential to serve as long-term indicators of grassland condition as they generally were sensitive to effects ofdifferent land management practices but not to yearlychange in weather conditions. NDVI was insensitive to precipitation differences between years in July for most treatments, but was not in the native prairie. Choice of sampling time is important for these parameters to serve effectively as indicators.     

Fractionation of sedimentary arsenic from Port Kembla Harbour, NSW, Australia

The binding of arsenic in sediments of the heavily industrialised Port Kembla Harbour, NSW, Australia, has been investigated. Both dredge and core samples have been used to develop a sieving/sequential extraction (SE) procedure. Dredge samples included oxic surficial and deeper anoxic sediment. The main core sample analysed was 18 cm deep, sliced at 2 cm intervals. Sediment was sieved to three size ranges (<63 microm, 63-250 microm, >250 microm) and each of these was then subjected to a four step SE, sequentially solubilizing arsenic as ion exchangeable, 1 M HCl soluble, NH(2)OH.HCl soluble, and strong oxidising acid soluble. Concentrations of 50-500 mg As kg(-1) were found, elevated well above local background values. The core sample showed elevated concentrations of arsenic within the top 6-8 cm (300-500 mg As kg(-1)), relative to the deeper sediment (100-200 mg As kg(-1)). Substantial portions of the total arsenic present in the 0-8 cm sediments of core and dredge samples, were found to be soluble in 1 M pH 5 phosphate buffer or 1 M HCl. Arsenic in the lower 8-18 cm of the core displayed different solubility, the fourth stage SE strong acid digestion being required to solubilize >90% of the deep sediment arsenic. It appears that diagenesis had resulted in remobilisation of weakly bound arsenic with subsequent diffusion and deposition in surficial layers. Strong acid soluble arsenic present in deeper sediments has two possible origins: sedimented as strongly bound remaining untouched by diagenetic events, or subjected to diagenetic reactions such as pyritization, which lead to more stable crystalline forms of minerals.     

Legacies,socio-economic and biophysical processes and drivers: the case of future forest cover expansion in the Polish Carpathians and Swiss Alps

Mountain forest areas are key for providing a wide range of ecosystem services and are hot spots for land use change processes, in particular, increase in forest cover at the expense of mountain pastures and meadows. Mountain forest systems in eastern and western Europe have likely similar future socio-economic situations but significantly different socio-economic history. Using a scenario-based land use modelling approach (Dyna-CLUE framework) we model three scenarios (trend, liberalisation and self-sufficiency) of future land use in the Polish Carpathians and the Swiss Alps, focussing on forest cover change. We find that forest cover increase can be expected to continue in European mountainous regions under all likely scenarios, limited only by relatively strict policy interventions. Biophysical factors, rather than socio-economic ones, are key for defining the suitability for, and therefore likely locations of future forest cover, but land use legacy plays a very important role in the spatial patterns of future forest cover, particularly in eastern Europe.

     

Morphology Characteristics of Southern Appalachian Wilderness Streams1

Zink, Jason M., Gregory D. Jennings, and G. Alexander Price, 2012. Morphology Characteristics of Southern Appalachian Wilderness Streams. Journal of the American Water Resources Association (JAWRA) 48(4): 762‐773. DOI: 10.1111/j.1752‐1688.2012.00647.x Abstract: Watersheds without urbanization or impacts from logging are rare in the southern Appalachian Mountains. The Joyce Kilmer/Slickrock Wilderness of North Carolina and Tennessee contains 24 km² of old‐growth forest, with the balance of the wilderness in a mature second‐growth forest. The watersheds of Little Santeetlah and Slickrock Creek are located within the wilderness. Morphological information, including channel dimensions and longitudinal profiles, was gathered from 14 alluvial stream reaches in these watersheds. The study sites had drainage areas from 0.25 to 41.6 km² and stream slopes from 0.014 to 0.104 m/m. Bankfull cross‐section dimensions of the study stream reaches were strongly correlated to drainage area across the observed range of slopes and bed morphology. Cross‐section area and width relationships for the streams in this study did not differ significantly from regional curves for the mountain physiographic region of North Carolina. Observations of these reaches did not suggest a definitive rule regarding the proportion of steps and riffles in streams. Pools occupied greater than 50% of the length in all stream reaches with slopes less than 0.07 m/m. Significant correlation existed between step height ratio and slope, suggesting that step height can be approximated as the product of channel width and slope. Riffle length and riffle slope ratios were also significantly correlated with slope, though pool spacing was not.     

An Assessment of Mercury Emissions from the Afton Copper Smelter,British Columbia,Canada

The Afton Copper Smelter adjacent to Kamloops, British Columbia, Canada commenced operation in 1978 and employed a mercury scrubbing system. Two years of preproduction studies, which included monitoring for mercury in ambient air, water, soli, and vegetation were performed. The results from similar studies conducted during four full years (1978–81) and two partial years (1982–83) of production are presented in the data analysis. These programs illustrated that the most frequent ground impingement occurred within a 1.6–3.2- km radius of the source, and that the levels decreased with increasing distance from the source to a maximum radius of 8 km. The results of a comprehensive source monitoring program illustrated that the average mercury emission levels ranged from 3.2 to 6.8 kg/calendar day during 1979–81, and that the majority of the emissions were in a vapour form. The ambient monitoring data acquired when smelter operations were significantly reduced indicate a quick recovery to preproduction levels in virtually all monitored parameters and at most monitored sites. The integrated results from all mercury monitoring programs illustrate the environmental impact from mercury emissions which were two to four times the permit standard of 1.8 kg/day.     

Papermill biosolids effect on soil physical and chemical properties

Papermill biosolids (PB) can provide multiple benefits to the soil system. The purpose of this study was to quantify the effects of a high C/N ratio (C/N = 100) de-inked PB on soil physical and chemical properties, including soil bulk density, infiltration rates, wet aggregate stability, total soil carbon, and heavy metal concentrations. Four rates of PB (0, 50, 100, and 150 Mg ha(-1)) were applied annually, for up to 3 yr, on four agricultural soils in Ontario, Canada. Decreases in soil bulk density between 0.27 and 0.35 g cm(-3), relative to the nonamended treatment, were observed in soils receiving PB treatments over 3 yr. Total soil carbon increased within 1 yr on PB-amended soils planted to soybeans but not on soils planted to corn. Hydraulic conductivities (K fs) were greater in all soils receiving PB amendments relative to the nonamended treatment throughout the study. Other properties measured, such as pH and electrical conductivity, were relatively unchanged after 2 yr of PB applications. While some increases in heavy metal accumulation occurred, there were no clear trends observed at any of the sites related to PB rates. The results of this study provide support to the idea that annual applications of PB can add significantly to the stability of soil structure.     

Energy use in Denmark

This paper reviews the evolution of energy use in Denmark since the early 1970s, in order to shed light on the future path of energy use in Denmark, with particular emphasis on the role of energy efficiency. Improvements in end-use energy efficiency reduced primary energy requirements in Denmark by 22% between 1972 and 1988. This change accounts for two-thirds of the decline in the ratio of energy use to gross domestic product that occurred during this time: the rest of the decline was caused by changes in the mix of goods and services produced and consumed by the Danes. Total energy savings achieved between 1972 and 1988 in Denmark ranked among the highest measured in any major OECD country. Overall, most of the energy savings in Denmark were brought about through improvements in technology. Short-term changes in consumer behaviour were significant in reducing energy needs for space heating and transport. An important stimulus for improved efficiency was higher energy prices, led in no small part by significant taxes imposed on small consumers of heating oil, electricity and motor fuels.