Promising results from the first biological control programme against a solanaceous weed (Solanum elaeagnifolium)

Two leaf-feeding chrysomelid beetles, Leptinotarsa texana and L. defecta, have been successfully established on Solanum elaeagnifolium, a solanaceous weed inadvertently introduced into South Africa from North America during the early 1900s. Unlike L. defecta, which remains localised and scarce, L. texana has proliferated at a number of release sites. Surveys of the damage caused by L. texana on S. elaeagnifolium showed that in some situations the beetles reached densities where the host plants were completely stripped of leaves, flowers and bark, whereas fruits were not eaten by the beetles. Longer term studies in plots with and without L. texana showed that even at relatively low levels of abundance of the beetles, the growth of S. elaeagnifolium was suppressed and the capacity of the plants to produce fruits was severely curtailed. As a result L. texana has the potential to be an effective biological control agent of S. elaeagnifolium in South Africa and elsewhere.     

Bioremediation of chlorobenzene-contaminated ground water in an in situ reactor mediated by hydrogen peroxide

New in situ reactive barrier technologies were tested nearby a local aquifer in Bitterfeld, Saxonia-Anhalt, Germany, which is polluted mainly by chlorobenzene (CB), in concentrations up to 450 microM. A reactor filled with original aquifer sediment was designed for the microbiological remediation of the ground water by indigenous bacterial communities. Two remediation variants were examined: (a) the degradation of CB under anoxic conditions in the presence of nitrate; (b) the degradation of CB under mixed electron acceptor conditions (oxygen+nitrate) using hydrogen peroxide as the oxygen-releasing compound. Under anoxic conditions, no definite degradation of CB was observed. Adding hydrogen peroxide (2.94 mM) and nitrate (2 mM) led to the disappearance of CB (ca. 150 microM) in the lower part of the reactor, accompanied by a strong increase of the number of cultivable aerobic CB degrading bacteria in reactor water and sediment samples, indicating that CB was degraded mainly by productive bacterial metabolism. Several aerobic CB degrading bacteria, mostly belonging to the genera Pseudomonas and Rhodococcus, were isolated from reactor water and sediments. In laboratory experiments with reactor water, oxygen was rapidly released by hydrogen peroxide, whereas biotic-induced decomposition reactions of hydrogen peroxide were almost four times faster than abiotic-induced decomposition reactions. A clear chemical degradation of CB mediated by hydrogen peroxide was not observed. CB was also completely degraded in the reactor after reducing the hydrogen peroxide concentration to 880 microM. The CB degradation completely collapsed after reducing the hydrogen peroxide concentration to 440 microM. In the following, the hydrogen peroxide concentrations were increased again (to 880 microM, 2.94 mM, and 880 microM, respectively), but the oxygen demand for CB degradation was higher than observed before, indicating a shift in the bacterial population. During the whole experiment, nitrate was uniformly reduced during the flow path in the reactor.     

Life cycle engineering im Automobilbau

Ecobalance represents the basic principle for an environmental analysis and the starting point for the possibility of achieving improvements. Using the criteria related to both technology and ecology, this method has been expanded upon by IKP/PE and, over the course of many years, has proven to be a satisfactory method for those fields associated with industry and research. Data banks and software systems have been designed and are today applied in industry. An expansion of the holistic balancing to include the ‘social’ dimension is currently being developed by the IKP. Today, ecological decisions in technically and economically-associated areas are continuously being developed which place more emphasis on the preliminary developments than on a purely retrospective analysis. Aside from the continuous, further developments of these types of analysis with regard to never technical questions as well as the integration of newer aspects of optimization based on life cycle information (e.g. production balancing), the goal of further work includes the preparation of process-chain information in the respective in preliminary developments related to the design. The automobile industry consequently plays a significant role here, as was also the case in the initial transformation of methodology which was carried out in the 1990s. Finally, these developments are additionally motivated through the new ordinances presented to be employed throughout the entire EU. The responsibility attributed to a product over the course of its entire lifetime therefore plays a more prominent role. This is also reflected in ordinances like those related to the redemption of old automobiles or in the WEEE of the electronics industry (Directive on Waste Electrical and Electronic Equipment).     

Short-term stability of genetic structure in populations of the sea anemone Metridium senile

Populations of the sea anemone Metridium senile (L.) were sampled from several locations in eastern North America in two series, one collected from 1977–1979 and the other from 1981–1985. Fourteen populations were sampled twice at one- to six-year intervals. Samples were analyzed for temporal differences in genetic composition at both the single locus and multiple locus levels. Overall patterns of geographic variation in allele frequency did not change between series. Regressions describing clines did not differ significantly, and loci not showing clinal variation in the first series remained similar in the second. Analysis of populations sampled twice produced no systematic evidence of change in allele frequency with time for any of four polymorphic loci. Comparisons with computer simulations of repeated sampling of multiple locus genotypes from panmictic populations with free recombination also revealed little temporal change at this level. One population showed possible evidence of recruitment from a different gene pool. Other significant departures from expectations reflected more reproducibility of genotype distributions between samples than expected for sexual populations. This excess stability likely results jointly from clonal reproduction and little sexual recruitment. Despite these indications of genetic stability in adult populations, newly settled juveniles were genetically different from resistant adults in one population, demonstrating the potential for genetic change by immigration. Successful sexual recruitment seems to be rare, even though larvae regularly settle from the plankton. Although interpretation of these results is somewhat limited by lack of knowledge of longevities and generation times, to the extent that they reflect longer-term trends, they suggest that at least some of the observed patterns of geographic variation in allele frequency probably result from natural selection.     

聚硅氯化铝(PASiC)混凝剂的特性及絮凝动态过程

 采用共聚与复合两种制备工艺,分别制备出具有不同碱化度(B)和不同Al/Si摩尔比系列的商用聚硅氯化铝(PASiC)混凝剂,并分别采用颗粒粒径测定方法和流动电流(SC)测定技术研究比较了PASiC和聚合氯化铝(PAC)混凝剂的颗粒大小、电动特性和凝聚絮凝动态过程.结果表明,Al/Si摩尔比、B值和制备工艺影响PASiC的聚合和带电特性.Al/Si摩尔比越小和B值越大,PASiC的颗粒就越大;在相同的B值下,PASiC较PAC具有更大的颗粒粒径.PASiC的电中和能力较PAC有所下降,且Al/Si摩尔比越小,PASiC的电中和能力下降越多;与PAC相比,PASiC具有更快的凝聚絮凝速度和形成更大的絮体;且Al/Si摩尔比越小,PASiC形成的絮体就越大.     

A method for assessing generalised nitrogen leaching estimates for agricultural land

The purpose of this study was to develop a method for assessing generalised N leaching estimates from large areas of agricultural land. The system developed was based on calculating a number of N leaching estimates for different typical cropping situations. The estimates were normalised with respect to varying weather conditions and crop production. The different cropping situations were described by setting up a matrix consisting of crucial factors influencing leaching such as soils, crops and climate. Nitrogen leaching was then estimated for a number of combinations of these factors. Calculations were made for three different regions where all the major crops were cultivated on soils with seven different textures and four different organic-N classes and two fertilisation regimes. The three regions are representative of climates and agricultural practices in some of the major agricultural areas in Sweden. The model used was the SOILN model. Leaching of nitrogen from the root zone showed large variations. The range was from 1 to 50 kg ha⁻¹ for different soils and crops when only fertiliser N was applied. Leaching varied both due to different climates and differences in cultivation practices between the regions. Leaching decreased in a south-north gradient. Leaching increased as a result of greater mineralisation when the organic matter content in the soils was increased, leaching was less from soils with a high clay content and was very small for the heavy clay soil. This revised version was published online in July 2006 with corrections to the Cover Date.