Laboratory studies to characterize the efficacy of sand capping a coal tar-contaminated sediment

Placement of a microbial active sand cap on a coal tar-contaminated river sediment has been suggested as a cost effective remediation strategy. This approach assumes that the flux of contaminants from the sediment is sufficiently balanced by oxygen and nutrient fluxes into the sand layer such that microbial activity will reduce contaminant concentrations within the new benthic zone and reduce the contaminant flux to the water column. The dynamics of such a system were evaluated using batch and column studies with microbial communities from tar-contaminated sediment under different aeration and nutrient inputs. In a 30-d batch degradation study on aqueous extracts of coal tar sediment, oxygen and nutrient concentrations were found to be key parameters controlling the degradation rates of polycyclic aromatic hydrocarbons (PAHs). For the five PAHs monitored (naphthalene, fluorene, phenanthrene, anthracene, and pyrene), degradation rates were inversely proportional to molecular size. For the column studies, where three columns were packed with a 20-cm sand layer on the top of a 5 cm of sediment layer, flow was established to sand layers with (1) aerated water, (2) N(2) sparged water, or (3) HgCl(2)-sterilized N(2) sparged water. After steady-state conditions, PAH concentrations in effluents were the lowest in the aerated column, except for pyrene, whose concentration was invariant with all effluents. These laboratory scale studies support that if sufficient aeration can be achieved in the field through either active and passive means, the resulting microbially active sand layer can improve the water quality of the benthic zone and reduce the flux of many, but not all, PAHs to the water column.     

Birnessite mediated debromination of decabromodiphenyl ether

Decabromodiphenyl ether (BDE-209) is a major component of a commercial flame retardant formulation; however, there is limited information on the fate of BDE-209 in the environment, including metal oxide mediated degradation. Laboratory experiments were conducted to investigate the birnessite (delta-MnO(2))-promoted debromination of BDE-209 in tetrahydrofuran (THF)-water systems as well as catechol solutions. Up to 100% (0.1044 micromol initial charge) of BDE-209 disappeared upon reaction with birnessite in THF/H(2)O (4:6-9:1). The formation of aqueous Br(-) from BDE-209 reduction was determined and up to 16 mole% of initial bromine was released over the course of the reaction indicating approximately 1.7 Br-C bonds were reduced per BDE-209 molecule. The distribution of debrominated congeners, however, indicated a much greater extent of debromination for some products than what was inferred from an average bromine mass balance. The produced congeners varied from tetra- to nona-bromodiphenyl ether, including BDE-47 and -99, during the 24 h reaction. Experiments with deuterated water indicated that water was not the major hydrogen donor in the reduction but rather THF provided the reducing power. This conclusion was supported by the presence of succinic acid, which was produced from oxidation of THF. The reactions with aqueous catechol, rather than THF-water mixtures, were performed to assess the possible role that compounds found in natural environments, such a tannin-like phenols, might have on the chemistry. These experiments indicated that birnessite mediated debromination of BDE-209 might occur in natural settings.     

Managing for Desired Experiences and Site Preferences: The Case of Fee-Fishing Anglers

Fee-fishing involves paying a fee for the privilege of fishing a body of water where fish populations are enhanced by stocking fish. Past literature on this activity has focused more on the operation of the enterprise and management of the fish than the people and site characteristics. The objectives of the study were to profile anglers and describe their site/management preferences. This study utilized an on-site interview and mail-back questionnaire at fee-fishing establishments in West Virginia (n = 212). Factor analysis of desired recreation experiences yielded five factors: Experience nature & adventure, Stress release & relaxation, Trophy fishing, Escape, and Family time. Cluster analysis showed that these anglers can be segmented into two distinct clusters, differing by sociodemographic characteristics, fishing behavior, and site/management preferences. The findings from this study provide baseline data to aid public resource managers and fee-fishing business owners in determining how to provide satisfying outdoor experiences and deliver desired services on-site. Future research will be needed from additional fee-fishing sites to obtain more detail about this outdoor recreation cohort and be able to generalize to a larger population of participants.     

Commute mode diversity and income inequality: an inter-urban analysis of 148 midsize US cities

Little is known about the relationship between multi-modal transportation environments and aspects of sustainable urban development, such as reduced income inequality and affordable housing. This study, adapted from Molotch and Appelbaum's inter-city differential method, studied 148 semi-isolated mid-size cities. Using U.S. Census data from 2013, we found that increased diversity in commute modality is associated with less income inequality between white and African-American households, as well as between men and women. Commute mode diversity is also associated with higher earnings for white women and African-American men. Our study also shows that cities with more commuter mode diversity are associated with higher home property values and affordable rental markets compared to automobile dependent cities. These results undercut the notion that increasing automobile ownership is a reasonable policy response to urban poverty, and suggest that sustainable transportation policy can produce positive economic gains for cities. This work adds to the growing literature identifying fundamental differences between multimodal and automobile dependent cities.     

Depth analysis of fatty acids in two caribbean reef corals

Total fatty acid compositions of colonies of two hermatypic, reef-building corals collected during the day-time over a depth range of 21 m were determined to assess the effect of depth-related environmental factors upon the lipid content of these organisms. No systematic changes were found, suggesting a steady-state balance between algal and animal lipogenesis in these symbiotic partnerships. Stephanocoenia michelinii, a day and night feeder, contained lipids indicative of external dietary sources such as copepods, whereas Montastrea annularis, a night feeder, did not.     

Yard waste compost as a stormwater protection treatment for construction sites.

Runoff water quality improvement from three yard waste compost erosion control treatments were compared with two conventional treatments and an untreated control on plots of 3:1 slope during two growing seasons, using natural events and simulated rainfall. Runoff volume, suspended solids, nutrients, biomass, turf shear strength, and turfgrass color scale were monitored. The most effective compost treatment, a 5-cm thick blown compost blanket, produced 12.7 times less runoff and 9.8 times less sediment load than a straw mat and silt fence treatment. The compost treatments generated eight times more biomass than the straw mat treatments. Root development was significantly better on the compost treatments based on turf shear strength measurements. Tilled-in compost was not as effective as a compost blanket at reducing sediment loss, particularly before the establishment of grass on the plot. The cost of compost treatments was similar to that of straw mat with silt fence treatments.     

Treatment technologies for aqueous perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA)

Fluorochemicals (FCs) are oxidatively recalcitrant, environmentally persistent, and resistant to most conventional treatment technologies. FCs have unique physiochemical properties derived from fluorine which is the most electronegative element. Perfluorooctanesulfonate (PFOS), and perfluorooctanoate (PFOA) have been detected globally in the hydrosphere, atmosphere and biosphere. Reducing treatment technologies such as reverses osmosis, nano-filtration and activated carbon can remove FCs from water. However, incineration of the concentrated waste is required for complete FC destruction. Recently, a number of alternative technologies for FC decomposition have been reported. The FC degradation technologies span a wide range of chemical processes including direct photolysis, photocatalytic oxidation, photochemical oxidation, photochemical reduction, thermally-induced reduction, and sonochemical pyrolysis. This paper reviews these FC degradation technologies in terms of kinetics, mechanism, energetic cost, and applicability. The optimal PFOS/PFOA treatment method is strongly dependent upon the FC concentration, background organic and metal concentration, and available degradation time.     

Treatment technologies for aqueous perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA)

Fluorochemicals (FCs) are oxidatively recalcitrant, environmentally persistent, and resistant to most conventional treatment technologies. FCs have unique physiochemical properties derived from fluorine which is the most electronegative element. Perfluorooctanesulfonate (PFOS), and perfluorooctanoate (PFOA) have been detected globally in the hydrosphere, atmosphere and biosphere. Reducing treatment technologies such as reverses osmosis, nano-filtration and activated carbon can remove FCs from water. However, incineration of the concentrated waste is required for complete FC destruction. Recently, a number of alternative technologies for FC decomposition have been reported. The FC degradation technologies span a wide range of chemical processes including direct photolysis, photocatalytic oxidation, photochemical oxidation, photochemical reduction, thermally-induced reduction, and sonochemical pyrolysis. This paper reviews these FC degradation technologies in terms of kinetics, mechanism, energetic cost, and applicability. The optimal PFOS/PFOA treatment method is strongly dependent upon the FC concentration, background organic and metal concentration, and available degradation time.     

ARTICULATED CONCRETE BLOCK STABILITY TESTING1

ABSTRACT: An articulated concrete block revetment system was developed by the U.S. Army Corps of Engineers to test and evaluate the practicability of the protocols for overtopping and channelized flow conditions. Test facilities were constructed, prototype articulated concrete blocks were fabricated and installed into the facilities, and the blocks were tested using the established protocols. The test results indicated that both the overtopping and channel flow tests yielded similar results: the blocks reached a point of instability at approximately the same velocity and shear stresses. The similar test results indicate that only one protocol is required to evaluate an articulated concrete block system. It was demonstrated that both protocols can be effectively conducted. It is recommended that the overtopping test be adapted as a standard test procedure because of its reduced construction costs and its efficiency compared to the channelized test.     

Phosphorus removal with by-products in a flow-through setting

Phosphorus (P) losses to surface waters can result in eutrophication. Some industrial by-products have a strong affinity for dissolved P and may be useful in reducing nonpoint P pollution with landscape-scale runoff filters. Although appreciable research has been conducted on characterizing P sorption by industrial by-products via batch isotherms, less data are available on P sorption by these materials in a flow-through context integral to a landscape P filter. The objectives of this study were to evaluate several industrial by-products for P sorption in a flow-through setting, to determine material chemical properties that have the greatest impact on P sorption in a flow-through setting, and to explore how retention time (RT) and P concentration affect P removal. Twelve materials were characterized for chemical properties that typically influence P removal and subjected to flow-through P sorption experiments in which five different RTs and P concentrations were tested. The impact of RT and P concentrations on P removal varied based on material chemical properties, mainly as a function of oxalate-extractable aluminum (Al), iron (Fe), and water-soluble (WS) calcium (Ca). Statistical analysis showed that materials elevated in oxalate-extractable Al and Fe and WS Ca and that were highly buffered above pH 6 were able to remove the most P under flow-through conditions. Langmuir sorption maximum values from batch isotherms were poorly correlated with and overestimated P removal found under flow-through conditions. Within the conditions tested in this study, increases in RT and inflow P concentrations increased P removal among materials most likely to remove P via precipitation, whereas RT had little effect on materials likely to remove P via ligand exchange.