Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Tillage erosion and its effect on soil properties and crop yield in Denmark

Tillage erosion had been identified as a major process of soil redistribution on sloping arable land. The objectives of our study were to investigate the extent of tillage erosion and its effect on soil quality and productivity under Danish conditions. Soil samples were collected to a 0.45-m depth on a regular grid from a 1.9-ha site and analyzed for 137Cs inventories, as a measure of soil redistribution, soil texture, soil organic carbon (SOC) contents, and phosphorus (P) contents. Grain yield was determined at the same sampling points. Substantial soil redistribution had occurred during the past decades, mainly due to tillage. Average tillage erosion rates of 2.7 kg m(-2) yr(-1) occurred on the shoulderslopes, while deposition amounted to 1.2 kg m(-2) yr(-1) on foot- and toeslopes. The pattern of soil redistribution could not be explained by water erosion. Soil organic carbon and P contents in soil profiles increased from the shoulder- toward the toeslopes. Tillage translocation rates were strongly correlated with SOC contents, A-horizon depth, and P contents. Thus, tillage erosion had led to truncated soils on shoulderslopes and deep, colluvial soils on the foot- and toeslopes, substantially affecting within-field variability of soil properties. We concluded that tillage erosion has important implications for SOC dynamics on hummocky land and increases the risk for nutrient losses by overland flow and leaching. Despite the occurrence of deep soils across the study area, evidence suggested that crop productivity was affected by tillage-induced soil redistribution. However, tillage erosion effects on crop yield were confounded by topography-yield relationships.     

Sustainable pattern analysis of a publicly owned Material Recovery Facility in a fast-growing urban setting under uncertainty

Sustainable development goals are achievable through the installation of Material Recovery Facilities (MRFs) in certain solid waste management systems, especially those in rapidly expanding multi-district urban areas. MRFs are a cost-effective alternative when curbside recycling does not demonstrate long-term success. Previous capacity planning uses mixed integer programming optimization for the urban center of the city of San Antonio, Texas to establish that a publicly owned material recovery facility is preferable to a privatized facility. As a companion study, this analysis demonstrates that a MRF alleviates economic, political, and social pressures facing solid waste management under uncertainty. It explores the impact of uncertainty in decision alternatives in an urban environmental system. From this unique angle, waste generation, incidence of recyclables in the waste stream, routing distances, recycling participation, and other planning components are taken as intervals to expand upon previous deterministic integer-programming models. The information incorporated into the optimization objectives includes economic impacts for recycling income and cost components in waste management. The constraint set consists of mass balance, capacity limitation, recycling limitation, scale economy, conditionality, and relevant screening restrictions. Due to the fragmented data set, a grey integer programming modeling approach quantifies the consequences of inexact information as it propagates through the final solutions in the optimization process. The grey algorithm screens optimal shipping patterns and an ideal MRF location and capacity. Two case settings compare MRF selection policies where optimal solutions exemplify the value of grey programming in the context of integrated solid waste management.     

填充柱(FID)-顶空气相色谱法测定水和废水中丙烯腈

本文用顶空气相色谱法测定水和废水中丙烯腈,具有简便、快速、灵敏、准确,干扰少,适用性强等优点,适用于不同类型的环境水样分析。     

添加炭基材料对蔬菜废物好氧堆肥进程和腐熟度的影响

以蔬菜废弃物辣椒秸秆和树叶为堆肥原料(CK),采用密闭式好氧堆肥工艺,研究了添加5%木本泥炭(T1)、5%活性炭(T2)和10%木本泥炭(T3)等炭基材料对堆肥pH、EC、CO2累积量、物料损失率、T值、C/N和发芽率指数的影响。结果显示,T2处理的pH在60 d后维持在8~9之间;EC值随着堆肥进行呈现先下降后升高再下降的趋势,最终CK、T1、T2和T3处理的EC值(mS/cm)分别降低了1.02、0.76、0.33和0.48;T2和T3处理的CO2累积量一直高于其他处理;所有处理的物料损失率均在20%以上;4个处理堆肥产品的T值分别为0.56、0.65、0.68和0.69;堆肥产品的发芽率指数分别为63.2%、69.3%、93.5%和86.1%。T值和发芽率指数显示T2和T3处理达到了腐熟阶段。结果表明,在蔬菜堆肥处理中添加炭基材料可改善堆肥产品的理化性质,加速堆肥物料的分解,有效地缩短堆肥周期和提高堆肥产品的腐熟度。     

沼气增温与控制系统的设计与仿真

冬季北方寒冷地区温度偏低,难以满足大中型沼气厌氧发酵系统对于温度的要求。为了解决该问题,针对天津地区某奶牛场沼气工程,设计了一套回收发电机余热并辅助电加热为发酵罐体供热的沼气增温控制系统,且实验确定最佳控制温度为35℃。在该系统中,罐体内部均匀布置竖直型循环加热管路,从而使料液温度分布更加均匀,热响应更加迅速,6 d左右即可将发酵罐内发酵料液提升到所需最佳温度;另外,采用罐内部温度及循环水流量的反馈调节,使料液的温度波动维持在±1℃范围内,解决了在冬季由于温度过低而导致沼气产气率偏低、甚至停滞的问题;同时,采用MATLAB软件对基于F-PID及传统PID的温度控制系统进行了仿真。对比结果表明,F-PID控制器较传统PID控制器超调量减小3℃,响应时间缩短60%,表明F-PID系统具有更高的效率、稳定性及实用价值。     

基于航空摄影测量的填埋堆体动态重构精度及影响因素

填埋堆体表面形变监测是填埋场库容管理和堆体失稳等风险分析的核心,其时空高分辨率监测研究近年来引起广泛关注。基于航空摄影的地表测量技术具有采集速度快、时空分辨率高等优点,但在填埋场特殊环境下,面对高频填埋活动、显著的堆体变化以及防雨膜覆盖等干扰时,要同时满足高时空分辨率和耗时短的动态监测要求,无人机的最佳飞行参数设定亟待研究。为此,该研究模拟中等规模危险废物填埋场的规模和日填埋量,利用专业级无人机获取模拟区域图像,空三加密处理生成三维点云数据,利用Arcmap叠加分析多期监测数据,从点位坐标、重构尺度、重构体积、体积差分精度4个角度分析重构误差。结果表明:三维重构的坐标精度可以达到米级;重构尺度误差为2~3 cm,重构体积误差为0.16~0.17 m³,差分体积误差为0.16~0.17 m³;进一步研究发现,高度为25~55 m时,高度越高精度越低,相机倾角为[-53°,-60°]时,精度最高,旁向重叠率大于80%时,误差骤减且基本稳定。考虑到填埋场的填埋作业间隔、无人机续航能力等对飞行时间的约束,为获得最佳精度,建议无人机飞行高度为37 m、相机倾斜角度为[-53°,-60°]、旁向重叠率为80%。     

聚氨酯泡沫材料阴燃发展过程的特性分析

分析对比了相同加热条件下的聚氨酯泡沫材料在有氧和无氧气氛下的升温过程,并对不同加热条件下的聚氨酯泡沫材料的阴燃传播速度进行研究.结果表明:沿着反应进行的方向,分离点的温度越来越低,不同热流条件下的温度分离曲线斜率在实验稳定发展段的变化规律表现得很相似,并在分离点出现后,有氧气氛中的该位置温度在短时间内急剧上升;在阴燃不稳定传播阶段时,热解前锋的速度小于氧化前锋的速度,在稳定传播阶段时,热解前锋速度与氧化前锋速度近乎相等.     

新化矿区煤矸石中微量元素赋存形态及浸出特征

利用BCR连续提取法和浸泡实验,对贵州省新化煤矿区不同风化程度的煤矸石中微量元素As、Cd、V、Zn、Co、Cr、Cu、Ni、Pb的赋存形态及浸出浓度进行研究。赋存形态研究结果表明:在煤矸石中As和Cd元素主要以酸溶态、可还原态和可氧化态形式赋存,而其他微量元素V、Zn、Co、Cr、Cu、Ni、Pb主要以残渣态形式赋存;除了V元素的赋存形态含量百分比不受煤矸石风化程度影响外,其它微量元素的赋存形态的含量百分比均会受到煤矸石风化程度的影响。煤矸石的浸出实验表明:浸泡时间是影响煤矸石中微量元素释放的一个重要因素;在浸泡过程中,大部分微量元素在浸泡前期的浸出浓度受煤矸石风化程度的影响,Zn和Cu元素则是在整个浸泡过程的浸出浓度均受到煤矸石风化程度的影响;不同粒径大小的煤矸石在浸泡过程中,除微量元素As和Co的浸出浓度不受煤矸石粒径大小的影响,其他微量元素在浸泡前期和中期的浸出浓度均与煤矸石的粒径大小呈反比。     

设施菜地土壤重金属累积及影响因素研究

为了解设施菜地土壤重金属累积规律及影响因,通过在全国8个省具有代表性的设施蔬菜产区采集土壤和肥料样品,系统研究了设施栽培年限、肥料施用、土壤性质对设施菜地土壤重金属Cu、Zn、Cd累积量及活度的影响.结果表明:与露天栽培相比,设施条件下随着栽培年限的延长,土壤Cu、Zn和Cd的全量和有效态浓度均呈明显的累积趋势,栽培年限>15a时的设施土壤Cu、Zn和Cd的全量和有效态浓度分别是露天栽培土壤的1.57、2.16、1.67、3.28、1.96、2.00倍.Pearson分析表明设施菜地土壤Cu、Zn、Cd均与土壤SOM呈极显著相关,说明其在来源上较强的相似性,进一步对设施栽培土壤主要投入品中Cu、Zn、Cd含量分析表明,猪粪、商品有机肥及土壤调理剂中Cu、Zn均超过了100mg/kg,Cd超过了1.0mg/kg,且投入量较大,是设施栽培土壤中Cu、Zn、Cd的主要贡献者,而秸秆和部分化肥(如尿素、硫酸钾)中的Cu、Zn、Cd含量均极低,对设施栽培土壤累积贡献微乎其微.pH值和CEC是影响Cu、Zn、Cd在土壤中累积活度的关键因素,其中随着pH值的升高土壤Cu活度表现了先升高后下降的趋势,而土壤Cd活度则表现了持续下降的趋势,仅在pH<6.26时达到了显著相关水平;土壤CEC的升高对土壤Cu活度表现了先下降后升高再下降的趋势,土壤Cd活度表现了先升高后缓慢下降再升高的趋势,而土壤Zn活度仅在CEC<5.83时随着CEC升高表现下降显著线性相关趋势.因此,防止设施栽培土壤Cu、Zn、Cd的累积与污染,选择重金属含量低的肥料和调控土壤理化特性(尤其是pH值、CEC)则是缓解设施栽培土壤重金属累积速率进而确保蔬菜质量安全的有效途径.