Estimate on spillover effect of environmental pollution between peripheral areas

ABSTRACT

Interaction of environmental pollution between peripheral areas has become a central topic in the field of resources and environment but little is known about the actual impact on peripheral areas in the current literature. This paper sets out a simultaneous equation model to investigate the spillover effect of environmental pollution between China’s peripheral areas utilizing the panel data of 218 cities in China. Making use of indicators for measuring the impact on environmental pollution, it identifies that environmental pollution between cities of China has a significant two-way spillover effect. After standardization of variables, it is found that the spillover effect of peripheral areas on urban environmental pollution cannot be neglected. Nearly, a third of the environmental pollution level in a city is induced by the environmental pollution in peripheral areas. If the indicator of environmental pollution in peripheral areas is missing, wrong conclusions will be drawn. Therefore, government should shift the emphasis of environmental regulation from local to global, and improve the overall environmental quality through coordinated management of regional environment.     

经济型阳离子淀粉絮凝剂的制备及其对印染废水的处理效果

采用玉米淀粉为原料、氯化缩水甘油三甲基铵（GTA）作阳离子化试剂、水-乙醇混合液作分散剂、NaOH作碱催化剂,制备了经济型阳离子淀粉絮凝剂（简称经济型阳离子淀粉）。实验结果表明：在淀粉加入量110g、GTA加入量30g、NaOH加入量1．6g、分散剂中m（水）：m（乙醇）=1：1、m（分散剂）：m（淀粉）=0．50：1、反应温度80℃、反应时间2．5h的条件下,可制得取代度（DS）为0．31的经济型阳离子淀粉;用该经济型阳离子淀粉与聚丙烯酰胺（PAM）联用处理印染废水,当经济型阳离子淀粉加入量为140mg／L、PAM加入量为4mg/L、废水pH为8时,印染废水的色度去除率和COD去除率分别达92％和82％。该方法絮凝效果好,药剂费用低,产生的污泥少。     

基于专利的区域环境技术创新水平空间分异研究

以环境技术专利表征创新水平,采用绝对指标与相对指标、专利结构布局系数(或特化系数)与技术创新主体结构布局系数,衡量中国各省市环境技术创新水平的空间分异,探讨其不平衡性的原因.研究结果表明,绝对指标评价的环境技术创新水平,呈现"东高西低"的格局;相对指标表征的环境技术创新水平,大部分省市的评价结果基本上在0.1～0.5、0.59～1.04之间,空间分异不明显.东部地区省市发明专利、企业专利特化系数高,如天津、香港、北京、上海的发明专利特化系数均在1.3以上,香港和上海的企业专利特化系数大于2.但是发明专利、公司企业专利--2项最具价值的专利技术创新水平均较高的省市不多,我国环境技术创新水平整体水平不高.     

安徽省冬季PM2.5污染来源及其成因分析

随着中国城市化和工业化的加速发展,大气污染的问题日益突出,严重危害公众身体健康。基于安徽省逐小时PM2.5浓度监测数据,采用后向轨迹模式、潜在源因子分析法（PSCF）和权重浓度分析法（CWT）,构建PM2.5来源分析模型,分析了安徽省PM2.5的来源,并结合地理探测器辨析了影响PM2.5本底贡献浓度的驱动因子。结果表明：（1）本底贡献、本底外溢和外地输送这3个动态过程对安徽省PM2.5浓度的时空变化有重要的影响;（2）PM2.5月累计逐小时测量浓度、总浓度、外地输送浓度、本底贡献浓度、本底外溢浓度和月均PM2.5本底排放贡献率,均在整体呈现出西南高、东北低的分布趋势,但前3项在安徽西北部的阜阳、亳州和淮北等地出现高值区;（3）安徽省约97.5%的面积外地输送贡献率>50%,下辖市PM2.5本底排放贡献率在30%~50%,说明1月污染以外地输送为主;（4）工厂密度、车辆保有量密度和人口密度对PM2.5月累计本底贡献浓度的解释力q值分别为0.33、0.47和0.61,通过与PM2.5月累计测量浓度地理探测分析结果的比较,表明人为要素与PM2.5月累计本底贡献浓度的关系更加密切。研究结果可为区域大气污染治理提供科学的参考依据。     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

Heterogeneous UV/Fenton degradation of bisphenol A catalyzed by synergistic effects of FeCo2O4/TiO2/GO

A new method for bisphenol A (BPA) degradation in aqueous solution was developed. The characteristics of BPA degradation in a heterogeneous ultraviolet (UV)/Fenton reaction catalyzed by FeCo₂O₄/TiO₂/graphite oxide (GO) were studied. The properties of the synthesized catalysts were characterized using scanning electron microscopy, X-ray diffraction, and vibrating sample magnetometry. FeCo₂O₄ and TiO₂ were grown as spherical shape, rough surface, and relatively uniform on the surface of GO (FeCo₂O₄/TiO₂/GO). Batch tests were conducted to evaluate the effects of the initial pH, FeCo₂O₄/TiO₂/GO dosage, and H₂O₂ concentration on BPA degradation. In a system with 0.5 g L⁻¹ of FeCo₂O₄/TiO₂/GO and 10 mmol L⁻¹ of H₂O₂, approximately 90 % of BPA (20 mg L⁻¹) was degraded within 240 min of UV irradiation at pH 6.0. The reused FeCo₂O₄/TiO₂/GO catalyst retained its activity after three cycles, which indicates that it is stable and reusable. The heterogeneous UV/Fenton reaction catalyzed by FeCo₂O₄/TiO₂/GO is a promising advanced oxidation technology for treating wastewater that contains BPA.

     

Characterising the landscape of state environmental review policies and procedures in the United States: a national assessment

Following the intent of the National Environmental Policy Act of 1969, many states have adopted policies and procedures directing state agencies and local government units to evaluate the potential environmental impacts of development projects prior to their undertaking. In contrast to a rich literature on federal requirements, current understanding of state environmental review is narrowly focused and outdated. This paper seeks to provide information on the landscape of state environmental review policy frameworks. The paper identifies 37 states with formal environmental review requirements through a document review of state statutes, administrative rules and agency-prepared materials, and confirms this finding through a survey of state administrators. A two-tier classification is used to distinguish states based on the approach taken to address environmental review needs and the scope and depth of relevant policies and procedures implemented. This paper also provides a discussion of policy and programme attributes that may contribute to effective practice, and of the potential for adopting relevant legislation in states where environmental review is currently lacking.     

CAST工艺处理低C/N生活污水的强化脱氮性能

研究了不同运行条件对CAST工艺处理低C/N实际生活污水脱氮性能的影响,并对pH值和ORP的变化规律进行了分析。结果表明,传统4 h运行模式下,提高原水C/N比,TN去除效果并无显著提高;对于低C/N生活污水,降低充水比有利于提高出水TN去除率,然而,充水比降至16%时,系统因低负荷运行发生污泥膨胀。在不投加外碳源的情况下,采用分段进水交替A/O运行模式可大幅改善系统脱氮性能,且TN去除率随着交替次数的增多而提高,交替4次平均去除率达87.23%。系统采用实时控制方式运行时,可根据有机物降解、氨氧化及反硝化时pH值和ORP曲线上是否出现拐点,来判断反应系统的曝气以及搅拌时间是否过长、适当或不足。     

复合沸石滤床修复北方景观水体的实验研究

以天然矿物质沸石、细砂及煤渣取代传统滤料构建复合基质生态床,表面种植景观植物,采用下向流-上向流运行方式修复北方景观水体。分别进行静态实验及不同循环速率下的动态实验,考察对水体污染物去除过程。结果表明,2种运行方式下对水体NH⁺₄-N去除率都在85%以上,其中以1 h为循环周期的运行方式去除率达97%,较静态提高12.8%;TN去除率最高为84%;TP去除不稳定,过程缓慢。煤渣层对NH⁺₄-N的去除效果差,硝化作用不彻底与反硝化作用的加强使下层出水NH⁺₄-N 、NO^-₂-N及NO^-₃-N浓度均高于上层。提高循环速率有利于对氮的去除。     

表面活性剂清洗处理重度石油污染土壤

为了优化表面活性剂清洗处理重度石油污染土壤的方法和具体洗脱条件参数,采集山东省东营市胜利油田污染土壤,研究了阴离子-非离子混合表面活性剂对该土壤中石油类污染物的去除效果。应用化学热洗原理,主要考查了表面活性剂配比、投加量、清洗温度及清洗助剂对去除效果的影响。实验得到的清洗处理最佳条件为：使用LAS与TX-100质量比为8∶2的组合表面活性剂,总表面活性剂浓度为3 g/L,助剂硅酸钠浓度为5 g/L,75℃条件下搅拌1 h。清洗后土壤含油量从20%下降到4.6%,去除率达到76.9%。废水回用实验表明,清洗处理的废水对土壤中石油烃类物质仍有一定的去除效果。废水回用比从30%到100%时,对土壤中石油烃的去除率都可达到55%以上。对废水进行二次回用时仍能去除18.8%的污染物。