Panel Discussion

A stack design procedure is developed which accounts for the effect of plume interception by downwind buildings, and which provides information on effluent concentrations in a form useful to planning authorities. The information presented in this paper is directed to engineers carrying out stack designs for locations where downwind buildings are of comparable height to the stack. A wind tunnel investigation using tracer gas techniques indicates that, for a plume at building height, downwash on the upwind face of a building causes the high concentrations observed near the roof to be transported to ground level. The effect of a plume on elevated points is determined by the concept of the minimum descent height of the maximum allowable ambient concentration isopleth. This minimum descent height, computed using Gaussian plume dispersion theory, defines a building height below which pollutant concentrations will always lie within safe limits. A case study is presented for the use of the design procedure for a small thermal power plant in an urban area.     

Solar‐powered in situ soil washing with surfactant to collect LNAPL

This article presents the findings of a sustainable, surfactant‐enhanced, product recovery pilot‐scale study (PSS) completed between January 2010 and May 2010 at the Hydrocarbon Burn Facility located at the John F. Kennedy Space Center in Florida. The goal of this study was to implement a unique, simple, and sustainable light nonaqueous‐phase liquid (LNAPL) recovery process and evaluate site‐specific volumes and rates of LNAPL that could be collected and the degree of soil and groundwater cleanup that could be achieved. The recovery process was a combination of groundwater recirculation at a rate of approximately 2.9 gallons per minute (11.0 liters per minute), soil washing via LNAPL mobilization, and collection of LNAPL via a hydrophobic LNAPL skimmer. A biodegradable surfactant, ECOSURF^TM SA‐15, was added to the recirculation line to lower the interfacial tension and facilitate LNAPL recovery via mobilization. All equipment (submersible pump, LNAPL skimmer, surfactant feed pump, controls, and various other equipment) used was powered by a solar panel array. Approximately 60 gallons (227 liters) or 429 pounds (195 kilograms) of LNAPL were collected at the recirculation site over approximately three months during the PSS. The data suggest that surfactant amendments greatly enhanced free product collection. The maximum rate of free product collection was approximately 1 gallon (3.8 liters) per day. © 2012 Wiley Periodicals, Inc.     

Reducing primary and secondary impact loads on the pelvis during side impact

OBJECTIVE: The objective of the study was to determine which vehicle factors are significantly related to pelvic injury in side impact collisions. Identification of relevant parameters could aid in the reduction of these injuries. METHOD: Side impact crashes from the CIREN database were separated into those in which the occupant sustained a pelvic fracture and those in which no pelvic fracture occurred, although all occupants had serious injuries. A multibody MADYMO model was created of a USDOT SINCAP (U.S. Department of Transportation Side Impact New Car Assessment Program) test of a vehicle with a large center console. RESULTS: From a study of 113 side impact crashes in the ciren database, nearside occupants with pelvic fractures (n = 78) had (i) more door intrusion (mean, 37 vs. 32 cm, p = 0.02) than those who had serious injuries, but not pelvic fractures (ii) a greater likelihood that the lower border of the door intruded more than the upper part (40% vs. 18%, p < 0.025); and (iii) a greater likelihood that their vehicle had a center console (47 vs. 17%, p < 0.005). Other parameters such as occupant age, weight, gender, vehicle weight, and struck vehicle speed change were not significantly different. MADYMO modeling showed that with a center console, an initial positive pelvic acceleration occurred at about 30 msec, followed at about 45 msec by a second acceleration peak in the opposite direction. Reducing console stiffness reduced the second acceleration but not the initial peak. Allowing the seat to translate laterally when contacted by the door reduced the initial pelvic acceleration by 50% and eliminated the second acceleration peak. CONCLUSIONS: Redesigning the center console using less stiff materials and allowing some lateral translation of the seat could aid in reducing pelvic injuries in side impact collisions.     

Matrix Diffusion Modeling Applied to Long‐Term Pump‐and‐Treat Data: 1. Method Development

Despite the installation in the 1980s and 1990s of hydraulic containment systems around known source zones (four slurry walls and ten pump‐and‐treat systems), trichloroethene (TCE) plumes persist in the three uppermost groundwater‐bearing units at the Middlefield‐Ellis‐Whisman (MEW) Superfund Study Area in Mountain View, California. In analyzing TCE data from 15 recovery wells, the observed TCE mass discharge decreased less than an order of magnitude over a 10‐year period despite the removal of an average of 11 pore volumes of affected groundwater. Two groundwater models were applied to long‐term groundwater pump‐and‐treat data from 15 recovery wells to determine if matrix diffusion could explain the long‐term persistence of a TCE plume. The first model assumed that TCE concentrations in the plume are controlled only by advection, dispersion, and retardation (ADR model). The second model used a one‐dimensional diffusion equation in contact with two low‐permeability zones (i.e., upper and lower aquitard) to estimate the potential effects of matrix diffusion of TCE into and out of low‐permeability media in the plume. In all 15 wells, the matrix diffusion model fit the data much better than the ADR model (normalized root mean square error of 0.17 vs. 0.29; r² of 0.99 vs. 0.19), indicating that matrix diffusion is a likely contributing factor to the persistence of the TCE plume in the non‐source‐capture zones of the MEW Study Area's groundwater‐extraction wells. © 2013 Wiley Periodicals, Inc.     

PFAS Experts Symposium: Statements on regulatory policy,chemistry and analytics,toxicology, transport/fate,and remediation for per‐ and polyfluoroalkyl substances (PFAS) contamination issues

Sixty leading members of the scientific, engineering, regulatory, and legal communities assembled for the PFAS Experts Symposium in Arlington, Virginia on May 20 and 21, 2019 to discuss issues related to per‐ and polyfluoroalkyl substances (PFAS) based on the quickly evolving developments of PFAS regulations, chemistry and analytics, transport and fate concepts, toxicology, and remediation technologies.  The Symposium created a venue for experts with various specialized skills to provide opinions and trade perspectives on existing and new approaches to PFAS assessment and remediation in light of lessons learned managing other contaminants encountered over the past four decades. The following summarizes several consensus points developed as an outcome of the Symposium:

• Regulatory and policy issues: The response by many states and the US Environmental Protection Agency (USEPA) to media exposure and public pressure related to PFAS contamination is to relatively quickly initiate programs to regulate PFAS sites. This includes the USEPA establishing relatively low lifetime health advisory levels for PFAS in drinking water and even more stringent guidance and standards in several states. In addition, if PFAS are designated as hazardous substances at the federal level, as proposed by several Congressional bills, there could be wide‐reaching effects including listing of new Superfund sites solely for PFAS, application of stringent state standards, additional characterization and remediation at existing sites, reopening of closed sites, and cost renegotiation among PRPs.
• Chemistry and analytics: PFAS analysis is confounded by the lack of regulatory‐approved methods for most PFAS in water and all PFAS in solid media and air, interference with current water‐based analytical methods if samples contain high levels of suspended solids, and sample collection and analytical interference due to the presence of PFAS in common consumer products, sampling equipment, and laboratory materials.
• Toxicology and risk: Uncertainties remain related to human health and ecological effects for most PFAS; however, regulatory standards and guidance are being established incorporating safety factors that result in part per trillion (ppt) cleanup objectives. Given the thousands of PFAS that may be present in the environment, a more appropriate paradigm may be to develop toxicity criteria for groups of PFAS rather than individual PFAS.
• Transport and fate: The recalcitrance of many perfluoroalkyl compounds and the capability of some fluorotelomers to transform into perfluoroalkyl compounds complicate conceptual site models at many PFAS sites, particularly those involving complex mixtures, such as firefighting foams. Research is warranted to better understand the physicochemical properties and corresponding transport and fate of most PFAS, of branched and linear isomers of the same compounds, and of the interactions of PFAS with other co‐contaminants such as nonaqueous phase liquids. Many PFAS exhibit complex transport mechanisms, particularly at the air/water interface, and it is uncertain whether traditional transport principles apply to the ppt levels important to PFAS projects. Existing analytical methods are sufficient when combined with the many advances in site characterization techniques to move rapidly forward at selected sites to develop and test process‐based conceptual site models.
• Existing remediation technologies and research: Current technologies largely focus on separation (sorption, ion exchange, or sequestration). Due to diversity in PFAS properties, effective treatment will likely require treatment trains. Monitored natural attenuation will not likely involve destructive reactions, but be driven by processes such as matrix diffusion, sorption, dispersion, and dilution.

The consensus message from the Symposium participants is that PFAS present far more complex challenges to the environmental community than prior contaminants. This is because, in contrast to chlorinated solvents, PFAS are severely complicated by their mobility, persistence, toxicological uncertainties, and technical obstacles to remediation—all under the backdrop of stringent regulatory and policy developments that vary by state and will be further driven by USEPA. Concern was expressed about the time, expense, and complexity required to remediate PFAS sites and whether the challenges of PFAS warrant alternative approaches to site cleanups, including the notion that adaptive management and technical impracticability waivers may be warranted at sites with expansive PFAS plumes. A paradigm shift towards receptor protection rather than broad scale groundwater/aquifer remediation may be appropriate.     

The Airline Lifesaver: a 17-year analysis of a technique to prompt the delivery of a safety message

INTRODUCTION: The Airline Lifesaver (AL) is a 13.3 cm x 9.8 cm card any passenger can deliver to the attendant of a commercial airline in order to prompt the delivery of an important safety message. In particular, the AL requests the following safety--belt reminder be added to the regular announcements given at the end of the flight-"Now that you have worn a seat belt for the safest part of your trip, the flight crew would like to remind you to buckle-up during your ground transportation." METHOD: The AL card was handed to 1,258 flight attendants over a 17-year period and compliance with the request for the safety message was systematically tracked. Slightly more than one-third of the AL cards (n=460) included an incentive for making the announcement. RESULTS: Without the incentive, compliance to give the buckle-up reminder was 35.5% of 798 flights. With the incentive, compliance was significantly higher (i.e., 53.3%). IMPACT: The validity of the AL intervention is discussed with regard to its: (a) relevance to cognitive dissonance and consistency theory, and (b) broad-based applicability as a component of community-wide efforts to facilitate a safety-focused culture. The 17-year study also demonstrated a practical and cost-effective application of a behavior-based incentive program.     

Sediment quality assessment of Beasley Lake: bioaccumulation and effects of pesticides in Hyalella azteca

Beasley Lake is a Conservation Effects Assessment Program (CEAP) watershed in the intensively cultivated Mississippi Delta, USA. Lake sediment quality at three sites was evaluated in 2004 and 2008 for biological impairment and uptake (animal tissue pesticide residues) from 14 pesticides and three metabolites using Hyalella azteca (Saussure). Eleven pesticides and three metabolites were detected in sediment among the three sites in 2004 and all 17 compounds examined were detected among the three sites in 2008, with the herbicide atrazine having the greatest concentrations. Twenty-eight-day H. azteca survival and growth (mg w/w) indicated no survival effects at any site for either year, but growth impairment occurred in H. azteca exposed to sediments in 2004, whereas growth enhancement occurred in H. azteca exposed to sediments at one site in 2008. Pesticides observed in animal tissue pesticide residues occurred more frequently and in greater concentrations in 2004 compared with 2008. Thirteen pesticides were detected in animal tissue pesticide residues in 2004, with chlorpyrifos occurring in the greatest concentrations, and six pesticides were detected in 2008, with p,p′-DDT occurring in the greatest concentrations. H. azteca tissue pesticide residues of seven pesticides, two herbicides, three insecticides, one insecticide metabolite, and p,p′-DDT, were associated with growth.     

Genetic Analysis of Norovirus Strains that Caused Gastroenteritis Outbreaks Among River Rafters in the Grand Canyon,Arizona

Toilet solid waste samples collected from five outbreaks among rafters in the Grand Canyon were subjected to sequencing analysis of norovirus partial capsid gene. The results revealed that a GI.3 strain was associated with one outbreak, whereas the other outbreaks were caused by GII.5 whose sequences shared >98.9% homology.     

Discrimination of flicker frequency rates in the reptile tuatara (Sphenodon )

By investigating the mechanisms that underlie the perception of environmental cues, we may begin to understand how the sensory system governs behavioral responses. This is the first empirical study to examine learning and visual sensitivity in a reptile species, the tuatara (Sphenodon punctatus). We established a non-intrusive psychophysical method by employing an instrumental paradigm in order to examine discrimination learning and the ability to distinguish different flicker frequencies in the tuatara. Seventeen tuatara were trained under an operant conditioning task to respond to various discriminative stimuli flickering between 2.65 and 65.09 Hz. Tuatara were able to learn the operant task and discriminate between a constant light and flicker frequency rates between 2.65 and 45.61 Hz, but not at 65.09 Hz. We demonstrated a reliable psychophysical method where these reptiles could learn a basic operant task and discriminate visual stimuli in the form of flicker frequency rates. The tuatara’s ability to perceive flickering light is comparable to that of avian, mammalian, and other reptilian species. This method is thus suitable for more comprehensive examinations of vision and additional sensory abilities in other reptiles. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.