Current Status of the ADVACATE Process for Flue Gas Desulfurization

The following report discusses current bench- and pilot-plant advances in preparation of ADVAnced siliCATE (ADVACATE) calcium silicate sorbents for flue gas desulfurization. It also discusses current bench- and pilot-plant advances in sorbent preparation. Fly ash was ground in a laboratory scale grinder prior to slurring in order to decrease the slurring time needed for the sorbent to be reactive with SO₂. Reactivity of ADVACATE sorbents with SO₂ in the bench-scale reactor correlated with their surface area.

ADVACATE sorbents produced with ground fly ash were evaluated in the 50 cfm (85 m³/h) pilot plant providing 2 s duct residence time. ADVACATE sorbent was produced by slurrying ground fly ash (median particle size of 4.3 µm) with Ca(OH)₂ at the weight ratio of 3:1 at 90°C (194°F) for 3hto yield solids with 30 weight percent of initial free moisture. When this sorbent was injected into the duct with 1500 ppm SO₂ and at 11°C (20°F) approach to saturation, the measured SO₂ removal was approximately 60percent at a Ca/S stoichiometric ratio of 2. Previously, when ADVACATE sorbent was produced at 90°C (194°F) and at the same fly-ash-to-Ca(OH)₂ weight ratio using unground fly ash, removal under the same conditions in the duct was approximately 50 percent following 12 h slurring. The report presents the results of pilot-scale recycle tests at the recycle ratio of 2. Finally, the report discusses future U.S. Environmental Protection Agency plans for commercialization of ADVACATE.     

Summary of the 1991 EPRI/EPA/DOE SO2 Control Symposium

The 1991 SO₂ Control Symposium was held December 3-6, 1991, in Washington, D.C. The symposium, jointly sponsored by the Electric Power Research Institute (EPRI), the U.S. Environmental Protection Agency (EPA), and the U.S. Department of Energy (DOE), focused attention on recent improvements in conventional sulfur dioxide (SO₂) control technologies, emerging processes, and strategies for complying with the Clean Air Act Amendments of 1990. Its purpose was to provide a forum for the exchange of technical and regulatory information on SO₂ control technology. Over 800 representatives of 20 countries from government, academia, flue gas desulfurization (FGD) process suppliers, equipment manufacturers, engineering firms, and utilities attended. In all, 50 U.S. utilities and 10 utilities in other countries were represented. In 11 technical sessions, a diverse group of speakers presented 111 technical papers on development, operation, and commercialization of wet and dry FGD, Clean Coal Technologies, and combined sulfur dioxide/nitrogen oxides (SO₂/NO_x processes.     

The Automotive Contribution to Air-Borne Polynuclear Aromatic Hydrocarbons in Detroit

The General Motors Research Laboratories and the Sloan-Kettering Institue for Cancer Research are collaborating to determine the contribution by automotive vehicles to the polynuclear aromatic hydrocarbons in city air. Sampling of particulate matter at the rate of 140 M³/min (5000 cfm) was carried out at two heavily-trafficked sites in Detroit and one suburban site in Warren, Michigan. Carbon monoxide was determined continuously, and particulate matter was analyzed for “tar,” polynuclear aromatic hydrocarbons, lead, vanadium, and sulfates. Polynuclear aromatic hydrocarbons in automobile exhaust gas are assumed to be dispersed in air along with carbon monoxide or lead from automobiles. It is further assumed that automobiles are the sole source of carbon monoxide and lead in the atmosphere. Concentrations of carbon monoxide and lead in exhaust gas and in the air are utilized to estimate the percentage of polynuclear aromatic hydrocarbons in the air attributable to automobiles. The mean automobile contributions to benzo(a)pyrene in the air, based on lead concentrations, were 18% at a Freeway Interchange, 5% in a downtown commercial area, and 42% in suburban Warren. The average concentrations of benzo(a)pyrene at the sites were 6 μg/10³ M³, 7 μg/10³ M³ and 1 μg/10³ M³, respectively. Mean contributions based on carbon monoxide concentrations were approximately twice the levels based on lead concentrations. Benzo(a)pyrene and benz(a)anthracene in air were not statistically related to carbon monoxide or lead in air, but were higher in winter than in summer, probably because of the higher levels of these materials emitted in space heating combustion in winter.     

Soiling Potential—A New Method for Measuring Smoke Emission

There is a growing interest in effects of sub-micron, nonsettling particles in the atmosphere among air pollution control agencies throughout the country. This type of pollution, generally referred to as the “soiling index” of the atmosphere, is produced primarily by the incomplete combustion of fuels. The measurement procedure has been fairly well standardized, the values being reported as Cohs or Ruds per 1000 linear feet of air. Using a similar technique, a method of quantitating smoke emission in objective terms first demonstrated by W. C. L. Hemeon in 1953, has been applied to source testing at several operating plants by the Cincinnati Division of Air Pollution Control. The source strength will be called “soiling potential” while the effect in the general atmosphere is termed “soiling index.” The soiling potential unit is Rud-ft² per cubic foot exhaust gases or Rud-ft² per unit of fuel input. The “Soiling Potential” sampler is described and results of tests are given. Included is the use of soiling potential in quantitating smoke emission from single sources and for constructing area wide inventory of smoke emission. The use of an area wide smoke emission inventory in Rudft2 in a simple diffusion model for calculating the soiling index (Rud-ft²/1000 cu ft) in the general atmosphere at a given point is explored.     

A Method for Using Air Pollution Measurements and Public Opinion to Establish Ambient Air Quality Standards

Air quality was comprehensively evaluated by means of sampling at 21 locations over metropolitan Birmingham during a period of one year. Thousands of integrated samples of three common atmospheric gaseous pollutants and two common particulate pollutants were collected and analyzed. Following the year of sampling in 1964, a random household survey was completed by conducting personal interviews at more than 7200 households over metropolitan Birmingham. Statistical reduction of household survey results by census tract and by neighborhood area provided domestic fuel and waste burning emission data as well as public (resident) opinion on specific air pollution effects. The relationship between ambient air quality and neighborhood opinion of air pollution effects on health and property are evaluated statistically. Ambient standards are suggested which are based upon those air pollution levels shown to have adverse effects on approximately one-third of the people.     

A Scenario Optimization Model for Dynamic Reserve Site Selection

Conservation planners are called upon to make choices and trade-offs about the preservation of natural areas for the protection of species in the face of development pressures. We addressed the problem of selecting sites for protection over time with the objective of maximizing species representation, with uncertainty about future site development, and with periodic constraints on the number of sites that can be selected. We developed a 0–1, linear optimization model with 2 periods to select the sites that maximize expected species coverage subject to budget constraints. The model is based on the idea that development uncertainty can be characterized by a set of scenarios, each of which is a possible second-period development outcome for the set of sites. We also suggest that our 2-period model can be used in a sequential fashion that is consistent with adaptive planning. Results are presented for the Fox River watershed in Chicago.     

Climate,land, energy and water (CLEW) interlinkages in Burkina Faso: An analysis of agricultural intensification and bioenergy production

This paper discusses climate, land, energy and water (CLEW) interactions in Burkina Faso. It shows that integrated assessments of resource use at the national level can provide important insights and benefits, especially for a resource constrained least developed country. Agricultural policy is shown to have strong implications for energy use, whereas energy policies are found to be strongly interrelated with water constraints. Without an integrated and coordinated approach, strategy and policy formulation efforts to increase energy, food and water security could become both incoherent and counter‐productive.     

Use of Nutshells as Fillers in Polymer Composites

Nutshells are agricultural waste products that can be procured at relatively low cost. In this work we examined the possibility of using these biodegradable materials as fillers in poly(lactic acid) and low density polyethylene. The nutshells were ground into powder, blended with the polymer, and then injection molded with final weight varying from 10 to 40 weight %. The mechanical and thermal properties of the composites were then studied. In general, the addition of fillers caused reductions in mechanical properties to varying extents, but thermal properties were only slightly affected. The use of maleic anhydride and peroxide with the fillers had a negative effect on poly(lactic acid) but a slightly positive effect on the stiffness of polyethylene. The results suggested that polymer-nutshell composites may be usable in applications where cost is a concern and where some reductions in mechanical properties are acceptable.     

Direction of CRT waste glass processing: electronics recycling industry communication

Cathode Ray Tube, CRT, waste glass recycling has plagued glass manufacturers, electronics recyclers and electronics waste policy makers for decades because the total supply of waste glass exceeds demand, and the formulations of CRT glass are ill suited for most reuse options. The solutions are to separate the undesirable components (e.g. lead oxide) in the waste and create demand for new products. Achieving this is no simple feat, however, as there are many obstacles: limited knowledge of waste glass composition; limited automation in the recycling process; transportation of recycled material; and a weak and underdeveloped market. Thus one of the main goals of this paper is to advise electronic glass recyclers on how to best manage a diverse supply of glass waste and successfully market to end users. Further, this paper offers future directions for academic and industry research. To develop the recommendations offered here, a combination of approaches were used: (1) a thorough study of historic trends in CRT glass chemistry; (2) bulk glass collection and analysis of cullet from a large-scale glass recycler; (3) conversations with industry members and a review of potential applications; and (4) evaluation of the economic viability of specific uses for recycled CRT glass. If academia and industry can solve these problems (for example by creating a database of composition organized by manufacturer and glass source) then the reuse of CRT glass can be increased.