Short-Term Hydroscheduling with Discrepant Objectives Using Multi-Step Progressive Optimality Algorithm1

Cheng, Chuntian, Jianjian Shen, Xinyu Wu, and Kwok-wing Chau, 2012. Short-Term Hydroscheduling with Discrepant Objectives Using Multi-step Progressive Optimality Algorithm. Journal of the American Water Resources Association (JAWRA) 48(3): 464-479. DOI: 10.1111/j.1752-1688.2011.00628.x Abstract: With increase in the number and total capacity of hydropower plants in power systems, optimality algorithms with a single objective are not suitable for optimizing the operation of complex hydropower systems to meet complex demands. Hydropower plants should prioritize discrepant objectives, such as peak regulation and maximizing generation during solving of optimal operation problems of hydropower systems. In this article, we present a multi-step progressive optimality algorithm (MSPOA) for the short-term hydroscheduling (STHS) problem to improve the quality of optimal solutions and enhance the convergence speed of progressive optimality algorithm (POA). In MSPOA, the original problem is first decomposed into a sequence of problems with the longer time steps. Next, the problem with the longest time step is solved, and the optimal solution is used as the initial solution for the problem with the second longest time step. This process proceeds until the original problem with the shortest time step is solved. The proposed discrepant-objective method and solution technique are tested for two types of hydroelectric systems. The results show that MSPOA can give better solutions and cost less time than POA due to enlarging feasible range of decision variables and reducing the number of computational stages. Discrepant objectives among hydropower plants can express the operation characteristics of complex hydropower systems more accurately than unique objective or multiple objectives.     

Effects of regional differences in waste composition on the thermal formation of polychlorinated aromatics during incineration

Two artificial wastes (A and B) whose contents reflect regional differences in municipal solid waste composition, were used to investigate the thermal formation of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), and naphthalenes (PCNs) during incineration. Flue gas samples were simultaneously collected at three ports in the post-combustion zone corresponding to flue gas temperatures of 400, 300, and 200 °C. The combustion of Waste B, which had a higher chlorine and metal content than Waste A, produced greater levels of highly-chlorinated homologues, as demonstrated by a higher degree of chlorination. The total concentrations of PCDDs, PCDFs, PCBs, and PCNs formed in the combustion of both wastes increased as temperature decreased along the convector. There were no significant differences in total concentrations between Waste A and Waste B combustion at specific temperatures, with exception of PCDFs at 400 °C. Orthogonal Projections to Latent Structures Discriminant Analysis (OPLS-DA) modeling, used to evaluate the data for all compound groups, suggest that during flue gas quenching at temperatures of 400 °C low-chlorinated homologues are preferentially formed in the presence of copper, which is known to be a very active catalyst for this process. At 300 and 200 °C, the formation of highly-chlorinated homologues is favored.     

An extended approach to calculate the ozone relative response factors used in the attainment demonstration for the National Ambient Air Quality Standards

With the promulgation of the National Ambient Air Quality Standards (NAAQS or standard) for 8-hr ozone (O₃), the U.S. Environmental Protection Agency (EPA) issued modeling guidance that advocated the use of results from photochemical air quality models in a relative sense. In doing so, the EPA provided guidance on how to calculate relative response factors (RRFs) that can project current design value (DV) mixing ratios into the future for the purpose of determining the attainment status with respect to the O₃ standard. The RRFs recommended by the EPA represent the average response of the photochemical model over a broad range of O₃ mixing ratios above a specified cutoff threshold. However, it is known that O₃ response to emission reductions of limiting precursors (i.e., NO_x and/or VOC) is greater on days with higher O₃ mixing ratios compared to days with lower mixing ratios. In this study, we present a segmented RRF concept termed band-RRF, which takes into account the different model responses at different O₃ mixing ratios. The new band-RRF concept is demonstrated in the San Joaquin Valley (SJV) region of California for the 1-hr and 8-hr O₃ standards. The 1-hr O₃ analysis is relevant to work done in support of the SJV O₃ State Implementation Plan (SIP) submitted to the EPA in 2013. The 8-hr example for the future year of 2019 is presented for illustrative purposes only. Further work will be conducted with attainment deadline of 2032 as part of upcoming SIPs for the 0.075 parts per million (ppm) 8-hr O₃ standard. The applicability of the band-RRF concept to the particulate matter (PM_2.5) standards is also discussed.

Implications:Results of photochemical models are used in regulatory applications in a relative sense using relative response factors (RRFs), which represent the impacts of emissions reductions over a wide range of ozone (O₃) values. It is possible to extend the concept of RRFs to account for the fact that higher O₃ mixing ratios (both 1-hr and 8-hr) respond more to emissions controls of limiting precursors than do lower O₃ mixing ratios. We demonstrate this extended concept, termed band-RRF, for the 1-hr and 8-hr O₃ National Ambient Air Quality Standard (NAAQS or standard) in the San Joaquin Valley of California. This extension can also be made applicable to the 24-hr PM_2.5 and annual PM_2.5 standards.     

Phthalic acid esters (PAEs) in workplace and house dust from Vietnam: concentrations,profiles, emission sources,and exposure risk

Environmental Science and Pollution Research - The occurrence of nine phthalic acid esters (PAEs) were determined in indoor dust samples collected from vehicle repair shops, waste processing...     

Prenatal diagnosis of Pierre–Robin sequence as part of Stickler syndrome

Stickler syndrome or hereditary progressive arthro-ophthalmopathy, is an autosomal dominant condition characterized by ocular manifestations, arthritic changes, orofacial features and deafness, in variable degrees. We report the first case of prenatal diagnosis of Stickler syndrome in a child with a Pierre–Robin sequence (PRS) causing a polyhydramnios. When isolated polyhydramnios is not explained by immunological, metabolic or infectious causes, swallowing difficulty due to PRS must be considered. As PRS is aetiologically heterogenous, the prognosis depends on the cause. Genetic investigations and familial history must be taken into account. Here, in a context of familial Stickler syndrome, making the prenatal diagnosis of PRS as part of Stickler syndrome allowed us to reassure the parents and to anticipate airway trouble at the child's birth. Copyright © 2002 John Wiley & Sons, Ltd.     

A predictive study of emotional labor and turnover

The current study examined how the emotional labor strategies of deep acting and surface acting directly influence emotional exhaustion and turnover intentions, and indirectly impact actual turnover among a sample of bank tellers. Turnover data were collected from organizational records 6 months after participants responded to a survey that measured emotional labor strategies, emotional exhaustion, and turnover intentions. Results showed that turnover intentions mediated the relationship between deep acting and actual turnover. Additionally, surface acting had indirect effects on turnover through emotional exhaustion and turnover intentions. Copyright © 2009 John Wiley & Sons, Ltd.     

Environmental impacts of building materials and building services components for commercial buildings in Hong Kong

The growing concerns over the environmental impacts of buildings have led to increasing demands for more environmental friendly buildings and building materials. Hitherto, there are not any comprehensive studies that show the overall environmental impact profiles of building materials and building services components for buildings. This paper intends to bridge this gap by reporting overall lifecycle environmental profiles of buildings as well as the ranking orders of environmental impacts of all the building materials and building services materials and components for commercial buildings. Twenty-five commercial buildings in Hong Kong, which include three Grade A office buildings, four Grade B office buildings, one Grade C office buildings, four retail centers and three hotels, have been selected for our study. Based upon these collected samples, no statistical differences were found in the average lifecycle environmental impacts for different building types despite some minor variations were detected. Subsequently, 10 types of building materials and 10 types of building services components have been identified for their significant lifecycle environmental impacts on commercial buildings. Among all, concrete, reinforcement bar, copper power cables, and copper busbars were ranked to be the four most significant materials or components to the total lifecycle environmental impacts. These should form the major targets for improvements in environmental performance of commercial buildings.     

A comparison of flux chambers and ambient air sampling to measure gamma-hexachlorocyclohexane volatilisation from canola (Brassica napus) fields

The insecticide gamma-hexachlorocyclohexane (gamma-HCH) is primarily used in Canada in treatments of canola (Brassica napus) seed. It has been shown that gamma-HCH so applied will volatilise with 12-30% entering the atmosphere within 6 wk after the seed is planted. Both flux chambers and high-volume air samplers were used to measure gamma-HCH volatilisation from a canola field and the results from each method compared. Daily samples were collected from three flux chambers located on the field. gamma-HCH was found in the air of the chambers on the first day after planting. Volatilisation rates were low for the first 7d (40.0 mg ha(-1) wk(-1)) but increased during the second week (143.8 mg ha(-1) wk(-1)). This was consistent with previous studies. Weekly composite air samples, from three heights above the canola field, were used to calculate volatilisation rates from the field. These were 190 mg ha(-1) wk(-1) (week 1) and 420 mg ha(-1) wk(-1) (week 2). Soil temperatures in the open field were warmer than those under the flux chambers and this may have contributed to the higher ambient air measurements.