土地承载力研究范式的变迁、分化及其综论

基于Kuhn范式理论,将现有土地承载力研究成果显化、梳理为4种主要研究范式,即基于限制因子的研究范式、基于多因素综合的研究范式、基于参照区的研究范式、基于生态足迹的研究范式。以范式应用的时代背景、空间尺度为着眼点,对各类范式进行综合比较,结果显示：基于限制因子的土地承载力研究范式起源最早、发展最为成熟,基于多因素综合、基于参照区、基于生态足迹的3种研究范式,均是以前者为基础,按照不同的方向分化而成;范式分化的原因在于时空条件的变化所引致的亟需解释、解决的现实问题的变化。范式本身并无优劣之分,但有其独特的适应性：基于限制因子、基于生态足迹的两种研究范式适用于全球及国家等大尺度土地承载力问题,且发展较为成熟,其成果具有较强的理论和实践指导意义;基于多因素综合及基于参照区的两种研究范式适用于市县等中小尺度,但其研究较为薄弱,所得的承载力分值、承载力相对值对区域土地管理实践的指导价值有限。当前,市县等中小尺度土地承载力研究亟需加强,其指导实践的有效性与可操作性亟待大幅度提高。     

生物基聚合物PHBV和PLA复合材料在不同介质中的生物降解及其影响因素

传统工艺的塑料生产不仅依赖石油资源的持续开发利用,同时给环境造成了前所未有的压力,近年来生物基聚合物（聚（3-羟基-3-戊酸酯）-PHBV,聚乳酸-PLA）日渐成为传统石油基塑料的替代产品.本文采用呼吸测试手段,旨在揭示均质复合材料在不同环境介质（土壤、熟化堆肥、水体）条件下及有机添加剂（木质素）,无机添加剂（蒙脱石）和天然有机物链增长剂（Joncryl）作用下的生物降解特征.结果表明：当链增长剂Joncryl添加量为5%时,对所有介质PHBV和PLA复合材料产生显著抑制作用.Joncryl添加量为0.2%时,未对所测样品的生物降解行为产生干扰作用.在熟化堆肥介质中,PLA复合材料比PHBV基质混合物的生物降解速率明显降低.有机木质纤维添加剂（榛子壳粉末）单独在聚合物中添加或者和链增长剂Joncryl以及非有机添加剂（Dellite72T）共同作用下都可促进PLA聚合物中各组分的相容连接性.实验结果表明,新型添加剂在不同介质中以二元或三元添加的方式对生物降解过程产生重要影响,该研究将为新型材料使用后的生物降解效应提供理论依据.     

Effect of TiO2 nanoparticle aggregation on marine microalgae Isochrysis galbana

TiO_2 nanoparticles(NPs) could adversely impact aquatic ecosystems. However, the aggregation of these NPs could attenuate this effect. In this work, the biological effects of TiO_2 NPs on a marine microalgae Isochrysis galbana were investigated. The aggregation kinetics of TiO_2 NPs under different conditions was also investigated to determine and understand these effects. Results showed that, though TiO_2 NPs had no obvious impact on the size and reproducibility of algal cells under testing conditions, they caused a negative effect on algal chlorophyll, which led to a reduction in photosynthesis. Furthermore, fast aggregation of TiO_2 NPs occurred under all conditions, especially at the pH close to the p Hzpc. Increasing ionic strength and NP concentration also enhanced the aggregation rate.The aggregation and the following sedimentation of TiO_2 NPs reduced their adverse effects on I. galbana.     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

Effects of Na+ on Cu/SAPO-34 for ammonia selective catalytic reduction

Copper-exchanged chabazite (Cu/CHA) catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na⁺ ions on Cu/SAPO-34 for ammonia selective catalytic reduction (NH₃-SCR) are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na⁺ ion-exchanges with H⁺ and Cu^2 + of Cu/SAPO-34. The exchange of H⁺ is easier than that of isolated Cu^2 +. The exchanged Cu^2 + ions aggregate and form “CuAl₂O₄-like” species. The NH₃-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu^2 + and acid sites is responsible for the activity loss.     

房屋建筑工程施工现场环境保护以及节能降耗控制措施研究

房屋建筑施工阶段是建筑工程中最为重要的阶段,也是资源消耗和环境污染的集中阶段。房屋建筑施工造成的环境污染主要来源于:施工中的固体垃圾、液体垃圾和气体垃圾,且在施工现场,相关人员节能降耗意识薄弱,对于施工中存在的资源浪费现象经常会忽视。基于此,给出了如下措施:加强施工过程的监控,合理排放施工现场的污水和固体废弃物;提高水的利用率,并在施工过程中,通过节水工艺对路面进行喷洒;合理排放施工过程产生的污水,对含有化学品、油漆的建筑材料要实施防渗漏措施;设置封闭式垃圾容器,利用袋装化形式将施工垃圾带出施工现场;倡导绿色施工。     

感潮河段污水处理厂尾水对受纳水体的水质影响研究

感潮河段污水处理厂尾水排放对受纳水体产生一定影响,利用二维水动力水质耦合模型,以COD、NH3-N、TP为污染因子,分别以正常排放和事故排放两种条件,模拟江苏南部某污水处理厂尾水排放,分析江段大小潮时污染物浓度增量情况。实验结果表明:正常排放,尾水对排放口附近江段保护区水质影响小;事故排放,尾水对保护区水质无影响,但长江水体影响范围增大,沿岸污染物浓度增高,且小潮周期影响作用强于大潮周期,污水处理厂应加强管理,尤其在小潮时应避免污水事故排放。     

广东省生活垃圾焚烧设施环境与健康风险评估构架研究

生活垃圾焚烧设施的建立是解决城市生活垃圾逐年增多的有效方式之一,但其所引发的环境与健康问题成为公众关注的热点。基于广东省对生活垃圾焚烧设施的研究,以环境管理为目标,结合国内外在该领域的研究现状,提出广东省生活垃圾焚烧设施环境与健康风险评估构架。通过该构架的多年实践,总结了广东省生活垃圾焚烧设施环境与健康风险评估研究所取得的成效,有望将该成果推而广之,从而使该行业实现绿色生态的蓬勃发展。