甲撑二苯基二异氰酸酯(MDI)生产过程中危险有害因素及对策措施

甲撑二苯基二异氰酸酯 (MDI)生产过程中涉及到了多种危险有害因素。笔者通过对国内现役MDI生产装置进行调研 ,同时结合国内外其他涉及光气生产厂家的情况 ,分析并指出了生产过程中可能出现的危险有害因素 ,从而提出了相应的对策措施     

Bibliometric analysis of simulated driving research from 1997 to 2016

Objective: The objective of this study was to explore the evolution footprints of simulated driving research in the past 20 years through rigorous and systematic bibliometric analysis, to provide insights regarding when and where the research was performed and by whom and how the mainstream content evolved over the years.

Methods: The analysis began with data retrieval in Web of Science with defined search terms related to simulated driving. BibExcel and CiteSpace were employed to conduct the performance analysis and co-citation network analysis; that is, probe of the performance of institutes, journals, authors, and research hotspots.

Results: A total of 3,766 documents were filtered out and presented an exponential growth from 1997 to 2016. The United States contributed the most publications as well as international collaborations followed by Germany and China. In addition, several universities in The Netherlands and the United States dominated the list of contributing institutes. The leading journals were in transportation and ergonomics. The leading researchers were also recognized among the 8,721 contributing authors, such as J. D. Lee, D. L. Fisher, J. H. Kim, and K. A. Brookhuis. Finally, the co-citation analysis illuminated the evolution of simulated driving research that covered the following topics roughly in chronological order: task-induced stress, drivers with neurological disorders, alertness and sleepiness while driving, trust toward driving assistance systems, driver distraction, the effect of drug use, the validity of simulators, and automated driving.

Conclusions: This article employed bibliometric tools to probe the contributing countries, institutes, journals, authors, and mainstream hotspots of simulated driving research in the past 20 years. A systematic bibliometric analysis of this field will help researchers realize the panorama of global simulated driving and establish future research directions.     

Two-step fast microwave-assisted pyrolysis of biomass for bio-oil production using microwave absorbent and HZSM-5 catalyst

A novel technology of two-step fast microwave-assisted pyrolysis(f MAP) of corn stover for bio-oil production was investigated in the presence of microwave absorbent(Si C) and HZSM-5catalyst. Effects of f MAP temperature and catalyst-to-biomass ratio on bio-oil yield and chemical components were examined. The results showed that this technology, employing microwave, microwave absorbent and HZSM-5 catalyst, was effective and promising for biomass fast pyrolysis. The f MAP temperature of 500°C was considered the optimum condition for maximum yield and best quality of bio-oil. Besides, the bio-oil yield decreased linearly and the chemical components in bio-oil were improved sequentially with the increase of catalyst-to-biomass ratio from 1:100 to 1:20. The elemental compositions of bio-char were also determined. Additionally, compared to one-step f MAP process, two-step f MAP could promote the bio-oil quality with a smaller catalyst-to-biomass ratio.     

Improving biodegradation potential of domestic wastewater by manipulating the size distribution of organic matter

Carbon source is a critical constraint on nutrient removal in domestic wastewater treatment. However, the functions of particulate organic matter (POM) and some organics with high molecular weight (HMW) are overlooked in the conventional process, as they cannot be directly assimilated into cells during microbial metabolism. This further aggravates the problem of carbon source shortage and thus affects the effluent quality. Therefore, to better characterize organic matter (OM) based MW distribution, microfiltration/ultrafiltration/nanofiltration (MF/UF/NF) membranes were used in parallel to fractionate OM, which obtained seven fractions. Hydrolysis acidification (HA) was adopted to manipulate the MW distribution of dissolved organic matter (DOM) and further explore the correlation between molecular size and biodegradability. Results showed that HA pretreatment of wastewater not only promoted transformation from POM to DOM, but also boosted biodegradability. After 8 hr of HA, the concentration of dissolved organic carbon (DOC) increased by 65%, from the initial value of 20.25 to 33.48 mg/L, and the biodegradability index (BOD5 (biochemical oxygen demand)/SCOD (soluble chemical oxygen demand)) increased from 0.52 to 0.74. Using MW distribution analysis and composition optimization, a new understanding on the characteristics of organics in wastewater was obtained, which is of importance to solving low C/N wastewater treatment in engineering practice.     

典型水库型湖泊中CDOM吸收及荧光光谱变化特征:基于沿岸生态系统分析

为进一步了解水库型湖泊溶解性有机质(DOM)的地球化学特征,本文以三峡库区典型内陆水库型湖泊——长寿湖为研究对象,利用紫外-可见和三维荧光光谱,并结合湖区周边生态系统分析,讨论了长寿湖水体中CDOM的组成、来源和空间分布特征.结果表明,长寿湖不同采样点DOM浓度(DOC和CDOM)存在一定程度的空间分布差异,但各点FDOM分布较为稳定.回水区出现DOM累积,由于受陆源输入影响有限,水体内源活动主导,具有较明显"内源控制"特征,芳香性和分子量相对较低;而周边陆地以人工林兼旅游开发为主的采样点,陆源输入在带入较多腐殖化(高芳香性)组分的同时,人为活动排放也是导致其类蛋白组分丰富的重要原因;入湖区尽管周边果林和居民生活对水体DOM有一定影响,但上游河流输入的影响也不容忽视.另外,各采样点也出现了不受周边生态系统影响的独立的相关性特征,例如芳香性特征常数(SUVA280)和光谱斜率[S(275~295)]显著负相关、CDOM和FDOM极显著正相关、CDOM和S(275~295)负相关等.同时,长寿湖水体中CDOM的生色团主要由具有芳香性结构的大分子组分构成;至少51%的CDOM波动可以通过FDOM变化来进行解释,其中回水区荧光组分对CDOM变动的影响最为明显.在采用传统FI值无法区分DOM来源差异性时,结合采样点沿岸生态系统,综合紫外-可见和荧光光谱特征,有助于对DOM组成及来源进行解析.     

Synthesis and kinetics investigation of meso-microporous Cu-SAPO-34 catalysts for the selective catalytic reduction of NO with ammonia

A series of meso-microporous Cu-SAPO-34 catalysts were successfully synthesized by a one-pot hydrothermal crystallization method, and these catalysts exhibited excellent NH_3-SCR performance at low temperature. Their structure and physic chemical properties were characterized by means of X-ray diffraction patterns(XRD), Scanning electron microscopy(SEM), Transmission electron microscopy(TEM), N_2 sorption-desorption, nuclear magnetic resonance(NMR), Inductively Coupled Plasma-Atomic Emission spectrometer(ICP-AES), X-ray absorption spectroscopy(XPS),Temperature-programmed desorption of ammonia(NH_3-TPD), Ultraviolet visible diffuse reflectance spectroscopy(UV-Vis DRS) and Temperature programmed reduction(TPR).The analysis results indicate that the high activities of Cu-SAPO-34 catalysts could be attributed to the enhancement of redox property, the formation of mesopores and the more acid sites. Furthermore, the kinetic results verify that the formation of mesopores remarkably reduces diffusion resistance and then improves the accessibility of reactants to catalytically active sites. The 1.0-Cu-SAPO-34 catalyst exhibited the high NO conversion( 90%) among the wide activity temperature window in the range of 150–425℃.     

轻型汽车和汽车塑料配件涂装工艺过程的VOCs组分特征

通过采集和分析珠江三角洲(以下简称“珠三角”)地区轻型汽车和汽车塑料配件涂装工艺过程的VOCs样品,识别了上述两个行业不同涂装工艺过程的VOCs组分特征.结果表明:芳香烃(56.4%~75.5%)和OVOCs(11.0%~35.7%)为轻型汽车涂装工艺占比最大的两种VOCs组分;烷烃和烯炔烃在烘干工艺所占比重要高于喷涂工艺;1,2,4-三甲苯为电泳和面涂烘干工序的主要VOCs组分,间/对-二甲苯、乙酸丁酯、丙二醇甲醚醋酸酯分别为中涂、面涂和中涂烘干工序的主要VOCs组分.汽车塑料配件涂装工艺不同工序的VOCs组成相似,芳香烃(53.3%~58.3%)和OVOCs(40.9%~45.8%)为主要VOCs组成,甲苯、乙酸乙酯、乙酸丁酯等为主要VOCs组分.不同废气治理设施对汽车塑料配件涂装工艺VOCs组分会造成一定的影响.活性炭吸附治理设施处理后的主要VOCs组分为甲苯、乙苯和邻二甲苯等芳香烃组分,水喷淋治理设施则为乙酸乙酯、乙酸丁酯和丙二醇甲醚醋酸酯等OVOCs类组分.通过与其他研究对比,丙二醇甲醚醋酸酯作为原辅料和废气中的主要组分之一,在以往研究中并未识别出来,表明针对测试对象的原辅料与工艺信息的现场调研是开展VOCs组分特征及成分谱研究的基础工作,建议未来该方面研究加强对前期调研工作的重视.此外,建议关注行业发展趋势给VOCs成分谱研究带来的影响.     

污染地块环境风险管控对策研究

鉴于我国污染地块环境管控法规制度缺失,土壤环境监管方面基本处于空白的实际,为了加强对污染地块的风险管控,规范对污染地块的开发利用,文章从厘清污染地块监管责任、明确监管责任、建立污染地块风险管控制度等方面提出了具体对策,建立了相关的风险管控制度,以期为我国污染地块环境管控提供技术支撑。     

推进工业领域污染防治的实施战略研究

通过对工业污染防治面临的主要问题以及未来工业绿色发展态势和国家环境保护严峻形势进行深入分析,指出"十三五"是中国工业面临转型升级的重要战略机遇期,并重点从推动生产方式绿色化、发展节能环保产业、推进清洁生产和循环经济、强化污染防治力度等方面提出了工业行业在推进污染防治工作中的总体思路和发展战略。     

Thiolated arsenicals in arsenic metabolism: Occurrence, formation, and biological implications

Arsenic (As) is a notoriously toxic pollutant of health concern worldwide with potential risk of cancer induction, but meanwhile it is used as medicines for the treatment of different conditions including hematological cancers. Arsenic can undergo extensive metabolism in biological systems, and both toxicological and therapeutic effects of arsenic compounds are closely related to their metabolism. Recent studies have identified methylated thioarsenicals as a new class of arsenic metabolites in biological systems after exposure of inorganic and organic arsenicals, including arsenite, dimethylarsinic acid (DMAV), dimethylarsinous glutathione (DMAIIIGS), and arsenosugars. The increasing detection of thiolated arsenicals, including monomethylmonothioarsonic acid (MMMTAV), dimethylmonothioarsinic acid (DMMTAV) and its glutathione conjugate (DMMTAVGS), and dimethyldithioarsinic acid (DMDTAV) suggests that thioarsenicals may be important metabolites and play important roles in arsenic toxicity and therapeutic effects. Here we summarized the reported occurrence of thioarsenicals in biological systems, the possible formation pathways of thioarsenicals, and their toxicity, and discussed the biological implications of thioarsenicals on arsenic metabolism, toxicity, and therapeutic effects.