A study of assessment indicators for environmental sustainable development of science parks in Taiwan

This study adopted the ecological footprint calculation structure to calculate the ecological footprints of the three major science parks in Taiwan from 2008 to 2010. The result shows that the ecological footprints of the Hsinchu Science Park, the Central Taiwan Science Park, and the Southern Taiwan Science Park were about 3.964, 2.970, and 4.165 ha per capita. The ecological footprint (EF) of the Central Taiwan Science Park was the lowest, meaning that the influence of the daily operations in the Central Taiwan Science Park on the environment was rather low. Secondly, the population density was relatively high, and the EF was not the highest of the Hsinchu Science Park, meaning that, while consuming ecological resources, the environmental management done was effective. In addition, the population density in Southern Taiwan Science Park is 82.8 units, lower than that of Hsinchu Science Park, but its ecological footprint per capita is 0.201 units, higher than Hsinchu, implying its indicator management has space for improvement. According to the analysis result above, in the science parks, the percentages of high-energy-consuming industries were rather high. It was necessary to encourage development of green industries with low energy consumption and low pollution through industry transformation.     

The contents and forms of solid-phase species of radioactive strontium and cesium in Taiwan soils

This study was to investigate the activities and contents of ¹³⁷Cs in the profiles of selected arable and forest soils in Taiwan and various solid-phase species of ⁸⁵Sr and ¹³⁷Cs in selected arable soils in Taiwan. The gamma (γ) ray spectra of the collected soil samples and some of the soils amended with ⁸⁵Sr and ¹³⁷Cs were measured. The data indicate that the arable soils from Sanhsing series, Sanhsing Township and Chuangwei series, Chuangwei Township, Ilan County, and from Tunglochuan series, Pinglin Township, Taipei County shows significantly higher radioactivity of ¹³⁷Cs (ND − 11.0 ± 0.2 Bq kg⁻¹). Furthermore, the radioactivity of ¹³⁷Cs in the mountain soils (1.24 ± 0.07 − 42 ± 1 Bq kg⁻¹) from Yuanyang Lake Nature Preserve among Ilan, Taoyuan, and Hsinchu Counties is the highest among the investigated mountain forest soils. This may be mainly attributed to the fact that Ilan County is located in the northeastern part of Taiwan and faces the northeastern and northern seasonal winds with lots of precipitation annually from mid-autumn through mid-spring next year and is receiving greater amount of fallouts yearly. Due to longer reaction period (≥3 y) of ¹³⁷Cs with soil components, ¹³⁷Cs was mainly in the forms bound to oxides and to organic matter in the soil amended with ¹³⁷Cs and in the soil contaminated with ¹³⁷Cs. On the contrary, due to shorter reaction period (<60 d) of ⁸⁵Sr with soil components, ⁸⁵Sr was mainly in exchangeable form and partially in the forms bound to carbonates and oxides in the soils amended with ⁸⁵Sr.     

Analysis of the health risk of exposure to breast milk mercury in infants in Taiwan

The aim of this study was to assess the total concentration and health risk to infants of breast milk mercury in urban mothers and mothers married to fishermen in relation to fish intake in Taiwan. A total of sixty-eight healthy mothers were recruited for the study. The breast milk mercury geometric mean concentration was 2.02 microgl(-1) (n=56, range: 0.24-9.45 microgl(-1)) for the city group and 2.04 microgl(-1) (n=12, range: 0.26-8.62 microgl(-1)) for the fishermen's group. Of the three sources of mercury exposure (i.e., ingestion (breast milk), inhalation (ambient air), and dermal exposure (shower)), breast-feeding was found to be the largest (96.3-99.6% of the total). From a Monte Carlo simulation, in which methyl mercury accounted for about 50% of total mercury, the hazard quotient (exposure estimate/oral minimal risk level or target organ toxicity dose) exceeded 1.0 for 12.9% of urban babies and 18.8% of fishermen's babies (chronic oral minimal risk level and target organ toxicity dose: 3 x 10(-4)mgkg(-1)d(-1)). The calculated mercury exposure was 3.02 x 10(-1) microgkg(-1)d(-1) for a 3.49 kg urban baby boy and 3.06 x 10(-1) microgkg(-1)d(-1) for a 3.44 kg urban baby girl. These results suggest the life style of mothers (eating raw fish and shellfish such as used in "Sashimi" and "Sushi," and vitamin supplementation) may influence the mercury concentration in breast milk.     

Protein tyrosine dephosphorylation during copper-induced cell death in rice roots

Early signalling events that control the process of heavy metal-induced cell death are largely unknown in plants. In mammals protein tyrosine phosphorylation plays an important role in the activation of programmed cell death. We thus examined the involvement of tyrosine phosphorylation in Cu-induced rice cell death. This investigation demonstrates that Cu induces cell death and DNA fragmentation in rice root cells. In the presence of Cu, the level of phosphotyrosine accumulation declined in the band of 45 kDa, p45. To analyze the role of tyrosine dephosphorylation for the regulation of Cu-induced cell death more precisely, we increased levels of tyrosine phosphorylation using the protein tyrosine phosphatase inhibitor, sodium orthovanadate (Na(3)VO(4)). Treatment of rice roots with Na(3)VO(4) blocked Cu-induced cell death and protein tyrosine dephosphorylation. In addition, the antioxidant GSH and the calcium chelator EGTA significantly abolished Cu-induced cell death and protein tyrosine dephosphorylation. These results provide evidence that dephosphorylation of a tyrosine-phosphorylated protein, p45, is an important step in the Cu-triggered signalling transduction pathway.     

Application of biofiltration system on AOC removal: column and field studies

The Cheng-Ching Lake Water Treatment Plant (CCLWTP) is the main supplier of domestic water for the Greater Kaohsiung area, the second largest metropolis in Taiwan. Biological activated carbon (BAC) filtration is one of the major treatment processes in CCLWTP. The objectives of this study were to evaluate the effectiveness of BAC filtration on water treatment in the studied advanced water treatment plant and its capability on pollutants [e.g., AOC (assimilable organic carbon), bromide, bromate, iron] removal. In this study, water samples from each treatment process of CCLWTP were collected and analyzed periodically to assess the variations in concentrations of AOC and other water quality indicators after each treatment unit. Moreover, the efficiency of biofiltration process using granular activated carbon (GAC) and anthracite as the fillers was also evaluated through a column experiment. Results show that the removal efficiencies for AOC, bromide, bromate, and iron are 86% 100%, 17%, and 30% after the BAC filter bed, respectively. This indicates that BAC filtration plays an important role in pollutant removal. Results also show that AOC concentrations in raw water and effluent of the CCLWTP are approximately 143 and 16 microg acetate-Cl(-1), respectively. This reveals that the treatment processes applied in CCLWTP is able to remove AOC effectively. Results of column study show that the AOC removal efficiencies in the GAC and anthracite columns are 60% and 17%, respectively. Microbial colonization on GAC and anthracite were detected via the observation of scanning electron microscopic images. The observed microorganisms included bacteria (rods, cocci, and filamentous bacteria), fungi, and protozoa. Results from this study provide us insight into the mechanisms of AOC removal by advanced water treatment processes. These findings would be helpful in designing a modified water treatment system for AOC removal and water quality improvement.     

Adsorption of acid dye onto activated carbons prepared from agricultural waste bagasse by ZnCl2 activation

A series of activated carbons were prepared from agricultural waste sugarcane bagasse by chemical activation with zinc chloride (ZnCl2) as an activating agent at 500 degrees C and 0.5 h soaking time. The Langmuir surface area and total pore volume were used to estimate the average pore diameter of the carbon products. The values of the surface area and pore volume increased linearly with increase in the impregnation ratio (IR) up to 100 wt%. The adsorption capacities of the derived adsorbents for Acid Orange 10 were measured at 20 degrees C and 40 degrees C to gain further insights into the acidic surface oxides of the adsorbent from the results of Fourier transform infrared (FTIR) spectroscopy analysis and pH measurement. Adsorption isotherms of the acid dye on adsorbents prepared were determined and correlated with common isotherm equations. It was found that the Langmuir model appears to fit the isotherm data better than the Freundlich model. The physical properties of these adsorbents were consistent with the parameters obtained from the isotherm equations.     

Cadmium availability from granulated and bulk-blended phosphate-potassium fertilizers

Recent field experiments have shown that high chloride (Cl) in irrigation waters can increase soil cadmium (Cd) uptake by crops because of the formation of soluble ion-pair complexes of Cd with Cl in soil solution. The present study was aimed at testing a hypothesis that KCl in granulated PK fertilizers may enhance Cd uptake by crops from Cd-containing P fertilizers because of close contact between Cd and Cl in the same granules. Less effect would be expected if the same granular PK fertilizers were bulk-blended because of separation of Cd and Cl in different granules. A single superphosphate (SSP) containing 32 mg Cd kg(-1) was granulated by the compaction process with KCl at a P to K ratio = 1:1. Granular KCl was also bulk-blended with granular SSP or Cd-free monocalcium phosphate (MCP) at the same P to K ratio. An acid Ultisol (pH 5.2) was treated with PK fertilizers at 400 mg kg(-1) each for P and K. Upland rice (Oryza sativa L.) and soybean [Glycine max (L.) Merr.] were grown to maturity, and signalgrass (Brachiaria decumbens Stapf.) was cut four times during the study. The results showed that the agronomic effectiveness in increasing crop yield was the same with SSP and MCP whether granulated or bulk-blended with KCl. Concentrations of Cd in plant tissue samples of all crops were much lower for MCP than for SSP. In all the plant tissue samples, except grain samples of upland rice, Cd concentrations obtained with granulated (SSP + KCl) were significantly higher than that with bulk-blended (SSP) + (KCl).     

Absorption kinetics of NO from simulated flue gas using Fe(II)EDTA solutions

The absorption of NO encountering flue gases in aqueous solutions of Fe(II)EDTA was determined using a semi-batch stirred tank with a plane gas–liquid interface at 50 °C. The concentrations of NO, SO₂ and O₂ in the feeding stream were 300–800 ppm, 500–2200 ppm and 0–20%, respectively. The pH value of the Fe(II)EDTA solutions varied from 3 to 11. The concentrations of Fe(II)EDTA were maintained between 0.01 and 0.05 M. Experiments were performed to evaluate the effect of operating parameters on the NO absorption rate, the reaction kinetics of the reactants in gas and liquid phases, and the effect of competition between various reactants on the mass transfer rate in the NO removal system. Results indicate that the average reaction rate constant is 3.70 × 10⁷ M⁻¹ s⁻¹. Adding NaOH does not increase the absorption capability of Fe(II)EDTA. The presence of O₂ decreases the NO absorption rate with Fe(II)EDTA. The absorption rate of NO with Fe(II)EDTA decreases at low concentrations of SO₂, but increases at high concentrations.     

An efficient framework of emergency response to facilitate disaster recovery for fire-damaged medical equipment – Case study at a large medical centre after a fire

The major role of disaster recovery management is to rapidly restore the chaotic condition to normal, which includes mitigation, preparedness, response, and recovery. To reduce secondary damage and loss, the recovery process must be facilitated. Information technologies (including network, web-based, computer, and related software tools) speed up the work process to rapidly deliver disaster information to the related department. In this paper, we share an experience that used a framework of emergency response, including a simple pre-operating process and a web-based information system, to effectively manage and control damaged medical equipment after a fire accident in a hospital operating room. This web-based information system was built in only 2 weeks and was used to manage a large amount of medical equipment affected by the fire. Since then, it effectively prevented the interruption of clinical work at 22 clinical units by supporting the reconstruction activities.