The establishment of a standard operation procedure for psychiatric service after an earthquake

This study presents information on the design and creation of a standard operation procedure (SOP) for psychiatric service after an earthquake. The strategies employed focused on the detection of survivors who developed persistent psychiatric illness, particularly post-traumatic stress and major depressive disorders. In addition, the study attempted to detect the risk factors for psychiatric illness. A Disaster-Related Psychological Screening Test (DRPST) was designed by five psychiatrists and two public health professionals for rapidly and simply interviewing 4,223 respondents within six months of the September 1999 Chi-Chi earthquake. A SOP was established through a systemic literature review, action research, and two years of data collection. Despite the limited time and resources inherent to a disaster situation, it is necessary to develop an SOP for psychiatric service after an earthquake in order to assist the high number of survivors suffering from subsequent psychiatric impairment.     

Degradation of gas-phase propylene glycol monomethyl ether acetate by ultraviolet/ozone process: A kinetic study

A pilot-scale plug-flow reactor was built to investigate its performance in treating airborne propylene glycol monomethyl ether acetate (PGMEA) via ozonation, ultraviolet (UV) photolysis and UV/O3 technologies. Governing factors, such as the initial molar ratio of ozone (O3) to PG-MEA, UV volumetric electric power input, and moisture content in the influent airstream, were investigated. A 1-L batch reactor was used to investigate some photodegradation characteristics of PGMEA in advance. Experiments were conducted at a fixed influent PGMEA concentration of approximately 50 ppm and an ambient temperature of 26 degrees C. A gas space time of 85 sec in the plug-flow reactor was kept for either ozonation or photolysis reaction, whereas a gas space time of 170 sec was used for the UV/O3 degradation. Results show that an initial molar ratio of O3 to PGMEA of >2.91 and an UV volumetric electric input power of 0.294 W/L(-1) sufficed to obtain PGMEA decompositions of >90% by UV/O3. Kinetic analyses indicate that all types of PGMEA decomposition are pseudo-first order with respect to its concentration. Moisture content (relative humidity = 15-99%) and UV volumetric electric input power (0.147 and 0.294 W/L(-1)) were major factors that strongly affect the PGMEA degradation rate.     

Source identifications of PM10 aerosols depending on hourly measurements of soluble components characterization among different events in Taipei Basin during spring season of 2004

Continuous measurements of hourly PM10 soluble ions were performed by the in situ IC technology in order to assess the impact of Asian outflows on local air quality. The intensive aerosol observation was carried in Taipei from 11 February 22:00 to 7 April 19:00, 2004. Concentrations of the water-soluble ions (Cl(-), NO(-)(2), NO(-)(3), SO(2-)(4), Na(+), NH(+)(4), K(+), and Ca(2+)) were measured in a total of 3,300 samples. The characteristics of air pollutant events in Taipei Basin were classified as frontal dust, dust, northeast monsoon, south wind and sea/land breeze according to the hourly meteorology and air pollutant concentrations. Factor analysis was conducted based on hourly data for 13 variables to find the group of variables with similar behavior. According to the source characteristics of high loading species, the possible sources of PM10 aerosols in each group were identified. Three to four factors were identified for each event. The total variances of frontal dust, dust, northeast trade, south wind, and sea/land breeze events were explained about 85%, 86%, 76%, 77%, and 80%, respectively, indicating that the identified factors were satisfactory.     

Volatile organic compound emissions from wastewater treatment plants in Taiwan: legal regulations and costs of control

This study assessed volatile organic compound (VOC) emission characteristics from wastewater treatment plants (WWTPs) in five Taiwanese industrial districts engaged in numerous manufacturing processes, including petrochemical, science-based industry (primarily semiconductors, photo-electronics, electronic products and biological technology), as well as multiple manufacturing processes (primarily pharmaceuticals and paint manufacturing). The most aqueous hydrocarbons dissolved in the wastewater of Taiwanese WWTPs were acetone, acrylonitrile, methylene chloride, and chloroform for the petrochemical districts; acetone, chloroform, and toluene for the science-based districts; and chlorinated and aromatic hydrocarbons for the multiple industrial districts. The aqueous pollutants in the united WWTPs were closely related to the characteristics of the manufacturing plants in the districts. To effectively prevent VOC emissions from the primary treatment section of petrochemical WWTPs, the updated regulations governing VOC emissions were issued by the Taiwanese Environmental Protection Administration in September 2005, legally mandating a seal cover system incorporating venting and air purification equipment. Cost analysis indicates that incinerators with regenerative heat recovery are optimal for treating high VOC concentrations, exceeding 10,000ppm as CH(4), from the oil separation basins. However, the emission concentrations, ranging from 100 to 1000ppm as CH(4) from the other primary treatment facilities and bio-treatment stages, should be collected and then injected into the biological oxidation basins via existing or new blowers. The additional capital and operating costs required to treat the VOC emissions of 1000ppm as CH(4) from primary treatment facilities are less than US$0.1 for perm(3) wastewater treatment capacity.     

Regulating colored textile wastewater by 3/31 wavelength ADMI methods in Taiwan

The wastewater from textile dyeing facilities is difficult to treat satisfactorily because of high compositional variability and high color intensity. To reduce colored effluents discharged into watercourses, the government of Taiwan adopted the Effluent True Color Standard in 1998. The true color discharge limit is 400 American Dye Manufactures Institute (ADMI) units. The adopted analytical method is the ADMI Tristimulus Filter Method (3 wavelength (WL) method), and the 31 WL ADMI method might be also adopted as an alternative for color value measurement. The refractory nature of textile dyes and the introduction of this new regulation present an environmental challenge to the Taiwanese textile industry. The main objectives of this study were to (1) evaluate the efficacy of current wastewater treatment systems for controlling the colored textile wastewater discharges, and (2) evaluate the correlations between 3 and 31 WL ADMI methods. Ten representative textile wastewater treatment facilities employing biological and chemical coagulation treatment technologies were selected to perform a 10-consecutive-day effluent sampling and analysis. Results show that a significant difference between 3 and 31 ADMI methods was observed. These two ADMI methods cannot be substituted for each other, and the discharge standard should be determined based on the selected testing method. Investigation results also suggest that the commonly used wastewater treatment technology (biological + chemical coagulation) fails to effectively remove dye from the colored textile wastewater. Sodium hypochlorite (NaOCl) addition was applied by most facilities as the temporary post-polishment step to comply with the color discharge standard.