Vacuum pyrolysis process for remediation of hydrocarbon-contaminated soils

A vacuum pyrolysis process was used for the remediation of hydrocarbon–contaminated soils from “Les Vidangeurs de Montréal” site in Mascouche in the province of Québec, near Montréal. Ten samples were tested on a laboratory scale batch reactor, and one sample was tested on a prototype process development unit. The process is simple, efficient, reliable, and economically competitive with other existing technologies. The vacuum pyrolysis process efficiently treated soils contaminated with a variety of pollution levels and types, irrespective of the soil matrix, providing treated soils meeting the A criterion (noncontaminated, residential level) of the Ministry of Environment Québec (MENVIQ). The pyrolytic oil and the noncondensable pyrolytic gases can be used as makeup fuel in the process, because they have a high calorific value and their combustion should not pose any emission problems. The waterphase effluent must be treated before discharge.     

Assessing computer waste generation in Chile using material flow analysis

The quantities of e-waste are expected to increase sharply in Chile. The purpose of this paper is to provide a quantitative data basis on generated e-waste quantities. A material flow analysis was carried out assessing the generation of e-waste from computer equipment (desktop and laptop PCs as well as CRT and LCD-monitors). Import and sales data were collected from the Chilean Customs database as well as from publications by the International Data Corporation. A survey was conducted to determine consumers’ choices with respect to storage, re-use and disposal of computer equipment. The generation of e-waste was assessed in a baseline as well as upper and lower scenarios until 2020.The results for the baseline scenario show that about 10,000 and 20,000 tons of computer waste may be generated in the years 2010 and 2020, respectively. The cumulative e-waste generation will be four to five times higher in the upcoming decade (2010–2019) than during the current decade (2000–2009). By 2020, the shares of LCD-monitors and laptops will increase more rapidly replacing other e-waste including the CRT-monitors. The model also shows the principal flows of computer equipment from production and sale to recycling and disposal. The re-use of computer equipment plays an important role in Chile. An appropriate recycling scheme will have to be introduced to provide adequate solutions for the growing rate of e-waste generation.     

Crushed concrete as a phosphate binding material: a potential new management tool

To avoid eutrophication of receiving waters, effective methods to remove P in urban and agricultural runoff are needed. Crushed concrete may be an effective filter material to remove dissolved and particulate P. Five types of crushed concrete were tested in the laboratory to evaluate the retention capacity of dissolved P. All types removed P very effectively (5.1-19.6 g P kg(-1) concrete), while the possible release of bound P varied between 0.4 and 4.6%. The retention rate was positively related to a decreasing concrete grain size due to an increasing surface area for binding. The P retention was also related to a marked increase in pH (up to pH 12), and the highest retention was observed when pH was high. Under these circumstances, column experiments showed outlet P concentrations <0.0075 mg P L(-1). Furthermore, experiments revealed that release of heavy metals is of no importance for the treated water. We demonstrate that crushed concrete can be an effective tool to remove P in urban and agricultural runoff as filter material in sedimentation/infiltration ponds provided that pH in the treated water is neutralized or the water is diluted before outlet to avoid undesired effects caused by the high pH.     

Application of lean flammability limit study and large eddy simulation to burner development for an oxy-fuel combustion system

Previously, we developed a model to predict lean flammability limit L and flame propagation velocity Sb for pulverized coal. In the present paper, we have extended the model to apply it in development of oxy-fuel combustion systems. The basic model consists of two particles. One of the two particles burns first, then, the other particle is ignited by the heat of combustion of the one burning particle. We analyzed at what distance the first burning particle could ignite the next particle, and how fast the first burning particle could ignite the next particle. The model was verified both for air and oxy-fuel combustion conditions. Next, a method to support burner development was examined by using the model. Local Sb and L near the ignition points of the burner could be analyzed from the concentration and temperature profiles of CFD results. Flame stability was judged by the calculated Sb and L profiles, and past results of blow-off limits obtained with actual- and pilot-scale experiments. A DS^®T-burner was developed by Hitachi Power Europe, and installed at the Schwarze Pumpe pilot plant. Combination of the technique and large eddy simulation was applied to confirmation of the system.     

Trends in management plans and guides: 25 years of experience from Southern France

This study analysed 14 management plans and guidelines from a 25-year period to understand trends in conservation planning. A Rosetta Stone Analysis was used for the systematic comparison of plans and guidelines. Management plans incorporated management philosophies, management scenarios, opportunities for infrastructure, and plans for data collection by 2000. As of 2010, they incorporated ecosystem services, stakeholders’ objectives and methods for storing and analysing data. The results demonstrate the complex nature of management plans, with an important workload for site managers. Recommendations for future planning include adjustments in planning timeframes and a better identification of conservation targets from initial stages.     

Modeling potential herbicide loss to surface waters on the Swiss plateau

Lack of sufficiently detailed data often limits the applicability of complex transport-reaction models for estimating potential herbicide loss to surface waters. Therefore, there is also a need for simple models that are easy to apply but still capture the main features of the underlying processes.In this study, a simple regression model was developed to assess the vulnerability of catchments in the Swiss Plateau to diffuse herbicide loss to surface waters. The model is designed as a screening tool to rank the catchments in a relative sense and not to calculate Predicted Environmental Concentrations (PEC) of pesticides. The main goal is to capture two dominating factors controlling diffuse herbicide transport into streams and rivers. These factors are herbicide application and fast flow processes that are mainly responsible for herbicide transport. In a first step vulnerability of sites to herbicide loss is estimated based on site-specific conditions irrespective of actual herbicide application. In the second step, this vulnerability assessment is combined with actual herbicide application data to estimate the potential herbicide loss.The fast flow index (FFI), derived from discharge data using a base flow separation method, was applied as a proxy for the amount of fast flow occurring. The influence of catchment attributes (including topographic, climatic and soil data) on the FFI was analyzed using a multiple regression approach based on data from 57 catchments of the Swiss Plateau. By combining regression analysis with mechanistic knowledge, a two factor non-linear model based on river density and soil permeability as dominant input factors was selected as the best model for FFI prediction given the available data. Higher dimensional models had to be excluded because the strong correlation between the potential input factors led to unrealistic dependences while only minimally improving the quality of the fit.The spatial pattern of the predicted FFI as a measure for the vulnerability to diffuse herbicide losses shows a clearly increasing trend from the western to the eastern part of the Swiss Plateau and towards the pre-alpine/alpine regions in the south.In general the pattern of herbicide use corresponds to site conditions typical of a low FFI. However, the spatial analysis revealed exceptions, namely areas in which high actual herbicide use coincides with a high FFI.Despite the uncertainties in the model, this simple approach seems to be useful for supporting site-adapted agricultural practice whenever the higher accuracy of more detailed models is not required or too expensive to achieve. In addition, in combination with data on actual herbicide application, it can support the design of monitoring strategies by identifying critical areas of actual herbicide loss.     

The role of remote sensing in hydrological modelling of the Okavango Delta, Botswana

A coupled surface water-groundwater model of the Okavango Delta has been built based on the United States Geological Survey software MODFLOW 2000 including the SFR2 package for stream-flow routing. It will provide a new tool for evaluating water management and climate change scenarios. The delta's size and limited accessibility make direct, on the ground data acquisition difficult. Remote sensing methods are the most promising source of acquiring spatially distributed data for both model input parameters and calibration. Topography, aquifer thickness, channel positions, evapotranspiration and precipitation data are all based on remote sensing. Simulated flooding patterns are compared to patterns derived from visible to thermal NOAA-AVHRR data and microwave radar ENVISAT-ASAR data.