Laboratory and field investigations of particulate and carbon monoxide emissions from traditional and improved cookstoves

We implemented a program in which emission characterization is enabled through collaborations between academic, US and international non-governmental entities that focus on evaluation, dissemination, and in-use testing, of improved cookstoves. This effort resulted in a study of field and laboratory emissions from traditional and improved biofuel cookstoves. We found that field measured particulate emissions of actual cooking average three times those measured during simulated cooking in the laboratory. Emission factors are highly dependent on the care and skill of the operator and the resulting combustion; these do not appear to be accurately reproduced in laboratory settings. The single scattering albedo (SSA) of the emissions was very low in both lab and field measurements, averaging about 0.3 for lab tests and around 0.5 for field tests, indicating that the primary particles are climate warming. Over the course of three summers in Honduras, we measured field emissions from traditional cookstoves, relatively new improved cookstoves, and “broken-in” improved cookstoves. We found that well-designed improved cookstoves can significantly reduce PM and CO emission factors below traditional cookstoves. For improved stoves, the presence of a chimney generally resulted in lower emission factors but left the SSA unaffected. Traditional cookstoves had an average PM emission factor of 8.2 g kg^?1 – significantly larger than previous studies. Particulate emission factors for improved cookstoves without and with chimneys averaged about 6.6 g kg^?1 and 4.5 g kg^?1, respectively. The elemental carbon (EC) fraction of PM varied significantly between individual tests, but averaged about 25% for each of the categories.     

Occurrence of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in Lake Maggiore (Italy and Switzerland)

Samples of air (gas and particulate phases), bulk deposition, aquatic settling material and sediments were collected in Lake Maggiore (LM) in order to determine their content of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Air (gas and particulate phases) concentrations were 0.5 pg m(-3), 80 pg m(-3), 13 pg m(-3) and 106 pg m(-3) for SigmaPCDD/Fs, SigmaPCBs, Sigma dioxin-like PCBs (DL-PCBs) and SigmaPBDEs, respectively. Deposition fluxes ranged from 0.7 ng m(-2) d(-1) for SigmaPCDD/Fs to 32 ng m(-2) d(-1) for SigmaPCBs. Aquatic settling material presented concentrations of 0.4 ng g(-1) dry weight (dw) for SigmaPCDD/Fs, 13 ng g(-1) dw for SigmaPCB, 3.4 ng g(-1) dw for SigmaDL-PCBs and 5.7 ng g(-1) dw for SigmaPBDEs. Mean sediment concentrations were 0.4 ng g(-1) dw for SigmaPCDD/Fs, 11 ng g(-1) dw for SigmaPCB, 3 ng g(-1) dw for SigmaDL-PCBs and 5.1 ng g(-1) dw for SigmaPBDEs. Similar PCDD/F and DL-PCB congener patterns in all the environmental compartments of LM point to an important, if not dominant, contribution of atmospheric deposition as source of these pollutants into LM. In contrast, PBDE congener distribution was not similar in the different environmental compartments. BDE 47 dominated air and settling material, while BDE 209 was the predominant congener in the bulk atmospheric deposition. Moreover, sediments showed two distinct PBDE congener profiles. Lower PBDE concentrated sediments were dominated by congeners 47 and 99, while BDE 209 dominated in higher PBDE concentrated samples. This suggests the influence of local sources as well as atmospheric input of PBDEs into LM.     

Thermal waste treatment and resource management — a petrologic approach to control the genesis of materials in smelting processes

Primary stores in the sense of geogenic mineral deposits (ores and stones) are diminishing, while the coresponding stocks in urban settlement are increasing accordingly. In this situation, concepts are required to use both the remaining primary resources and the secondary resources more efficiently. Petrologic evaluation is an approach in this context. Petrologic evaluation includes the combination of know-how and tools from geosciences and materials sciences. Additionally, engineering knowledge as well as material flow analysis methods are necessary. The issue to evaluate is the genesis of the flow of materials. The mode of operation of specific compounds on the genesis path is to be pursued. Based on a petrologic approach, it is possible to differentiate between essential (or favorable) and indifferent and disrupting compounds or reactions (disrupting with respect to technical means and environ-mental impact). Such an approach permits a product design in the sense of a material arrangement that is adapted to the function. The approach is illustrated with the example of a new generation of thermal waste treatment (smelting processes), which combines treatment of municipal solid wastes with production processes and mining in order to contribute to better resource management.     

Application of flotation for the separation of metal-loaded zeolites

Several industrial wastewater streams may contain heavy metal ions, which must be effectively removed, before the discharge or reuse of treated waters could take place. Different bonding materials, presenting selectivity and fast reaction kinetics for the removal of metals, have been examined for this purpose. The objective of the present paper was to investigate the application of dispersed-air flotation for the separation of metal-loaded sorbents. Two similar zeolite samples were applied as effective bonding agents for the removal of zinc, a toxic metal commonly found in many industrial wastewaters. This combined process, termed sorptive flotation, involves the preliminary scavenging of metal ions, by using the appropriate sorbent particles (usually present as ultrafine particulates), followed by flotation for the effective separation of them. The obtained results were very promising, as both metal and sorbent were effectively removed/separated from the dispersion.     

Inheritance of migratory direction in a bird species: a cross-breeding experiment with SE- and SW-migrating blackcaps (Sylvia atricapilla)

Summary Young avian migrants of many species are able to find their species- or population-specific wintering area without the help of conspecifics. In orientation tests hand-raised birds have been demonstrated to choose appropriate population-specific migratory directions, suggesting a genetic basis to this behaviour. I here report results of a cross-breeding experiment between individuals of two blackcap (Sylvia atricapilla) populations with widely different migratory directions. The orientation of the F1 offspring was intermediate between and significantly different from that of both parental populations (Fig. 2). The variance of individual mean directions in the F1 generation did not increase compared with the parental groups, and the inheritance of migratory directions was not sex-linked. The data provide direct evidence for a genetic basis of migratory directions in birds and demonstrate a phenotypically intermediate mode of inheritance.