Repeated hydrogen peroxide dosing briefly reduces cyanobacterial blooms and microcystin while increasing fecal bacteria indicators in a eutrophic pond

This study explored the effects of H₂O₂ on Cyanobacteria and non-target microbes using fluorometry, microscopy, flow cytometry, and high throughput DNA sequencing of the 16S rRNA gene during a series of mesocosm and whole-ecosystem experiments in a eutrophic pond in NY, USA. The addition of H₂O₂ (8 mg/L) significantly reduced Cyanobacteria concentrations during a majority of experiments (66%; 6 of 9) and significantly increased eukaryotic green and unicellular brown algae in 78% and 45% of experiments, respectively. While heterotrophic bacteria declined significantly following H₂O₂ addition in all experiments, bacteria indicative of potential fecal contamination (Escherichia coli, Enterococcus, fecal coliform bacteria) consistently and significantly increased in response to H₂O₂, evidencing a form of ‘pollution swapping’. H₂O₂ more effectively reduced Cyanobacteria in enclosed mesocosms compared to whole-ecosystem applications. Ten whole-pond H₂O₂ applications over a two-year period temporarily reduced cyanobacterial levels but never reduced concentrations below bloom thresholds and populations always rebounded in two weeks or less. The bacterial phyla of Cyanobacteria, Actinobacteria, and Planctomycetes were the most negatively impacted by H₂O₂. Microcystis was always reduced by H₂O₂, as was the toxin microcystin, but Microcystis remained dominant even after repeated H₂O₂ treatments. Although H₂O₂ favored the growth of eukaryotic algae over potentially harmful Cyanobacteria, the inability of H₂O₂ to end cyanobacterial blooms in this eutrophic waterbody suggests it is a non-ideal mitigation approach in high biomass ecosystems and should be used judiciously due to potential negative impacts on non-target organisms and promotion of bacteria indicative of fecal contamination.     

The effect of queen pheromones on worker honey bee ovary development

We report results that address a long-standing controversy in honey bee biology, the identity of the queen-produced compounds that inhibit worker honey bee ovary development. As the honey bee is the only organism for which identities have been proposed for any pheromone that regulates reproduction, the resolution of its identity is of broad significance. We examined the effects of synthetic honey bee queen mandibular pheromone (QMP), four newly identified queen retinue pheromone components, and whole-queen extracts on the ovary development of caged worker bees. The newly identified compounds did not inhibit worker ovary development alone, nor did they improve the efficacy of QMP when applied in combination. QMP was as effective as queen extracts at ovary regulation. Caged workers in the QMP and queen extract treatments had better developed ovaries than did workers remaining in queenright colonies. We conclude that QMP is responsible for the ovary-regulating pheromonal capability of queens from European-derived Apis mellifera subspecies.     

In situ modification of an aquifer material by a cationic surfactant to enhance retardation of organic contaminants

Sorption of hexadecyltrimethylammonium chloride (HDTMA), a cationic surfactant, on aquifer material from Columbus AFB, Mississippi, U.S.A., was examined. Transport studies using flow-through columns and a box model aquifer showed that an almost stationary zone of HDTMA-modified aquifer material could be produced in situ without a significant decrease in hydraulic conductivity.Perchloroethylene (PCE) and naphthalene sorption isotherms on the HDTMA-modified aquifer material were linear, and sorption coefficients were increased by over two orders of magnitude relative to the unmodified material. The retardation of PCE by insitu emplaced HDTMA zones within a column was examined. Agreement between batch- and column-derived sorption coefficients and breakthrough curve symmetry indicates that local equilibrium was attained. Significant retardation of a naphthalene plume by an in situ emplaced surfactant zone was demonstrated in the box model aquifer system.The experimental results indicate that it is feasible to create in situ a sorbent zone within an aquifer using cationic surfactants. In most situations, the sorbent zone concept needs to be coupled with contaminant degradation processes for sorbent emplacement to be a practical tool in the remediation of groundwater contamination sites. Sorbent zones may be of benefit in the engineering of suitable environments for microbial or abiotic degradation reactions and by providing time slow reactions to occur.     

Six interaction profiles for simple mixtures

The Agency for Toxic Substances and Disease Registry (ATSDR) has a program for chemical mixtures that encompasses research on chemical mixtures toxicity, health risk assessment, and development of innovative computational methods. ATSDR prepared a guidance document that instructs users on how to conduct health risk assessment on chemical mixtures (Guidance Manual for the Assessment of Joint Toxic Action of Chemical Mixtures). ATSDR also developed six interaction profiles for chemical mixtures. Two profiles were developed for persistent environmental chemicals that are often found in contaminated fish and also can be detected in human breast milk. The mixture included chlorinated dibenzo-p-dioxins, hexachlorobenzene, dichlorodiphenyl dichloroethane, methyl mercury, and polychlorinated biphenyls. Two profiles each were developed for mixtures of metals and mixtures of volatile organic chemicals (VOCs) that are frequently found at hazardous waste sites. The two metal profiles dealt with (a) lead, manganese, zinc, and copper; and (b) arsenic, cadmium, chromium, and lead; the two VOCs mixtures dealt with (a) 1,1,1-trichloroethane, 1,1-dichloroethane, trichloroethylene, and tetrachloroethylene; and (b) benzene, ethylbenzene, toluene, and xylenes (BTEX). Weight-of-evidence methodology was used to assess the joint toxic action for most of the mixtures. Physiologically based pharmacokinetic modeling was used for BTEX. In most cases, a target-organ toxicity dose modification of the hazard index approach is recommended for conducting exposure-based assessments of noncancer health hazards.     

Soybean production and conversion of tropical forest in the Brazilian Amazon: the case of Vilhena, Rondônia

The recent rise in Brazilian soybean production has generated concern among the environmental community and some authors that natural tropical environments of the Amazon Basin are being converted to soybean fields. Proponents of soybean production counter that soybeans represent a viable agricultural commodity for the region; environmental concern is unwarranted, because new soybean fields are replacing already deforested or otherwise transformed lands. Both arguments have been made without comprehensive study and measure of land-use/land-cover (LULC) in areas undergoing expansion of soybean production. This case study, conducted in the municipality of Vilhena, Rond?nia, Brazil, in the southwestern Amazon Basin, uses remote sensing to evaluate the LULC accompanying this municipality's large growth in soybean production from 1996 to 2001. Forests are being converted for soybean production, but most of the production increase appears attributable to slight expansion of already existing fields, conversion of already deforested land, and higher yields.     

Variables affecting emissions of PCDD/Fs from uncontrolled combustion of household waste in barrels

The uncontrolled burning of household waste in barrels has recently been implicated as a major source of airborne emissions of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). A detailed, systematic study to understand the variables affecting emissions of PCDD/Fs from burn barrels was performed. The waste composition, fullness of the barrel, and the combustion conditions within the barrel all contribute significantly to determining the emissions of PCDD/Fs from burn barrels. The study found no statistically significant effect on emissions from the Cl content of waste except at high levels, which are not representative of typical household waste. At these elevated Cl concentrations, the impact of Cl on PCDD/F emissions was found to be independent of the form of the Cl (inorganic or organic). For typical burn conditions, most of the PCDD/F emissions appear to be associated with the later stages of the burn when the waste is smoldering. Polychlorinated biphenyls (PCBs) were also measured for a subset of the tests. For the nominal waste composition, the average emissions were 76.8 ng toxic equivalency units (TEQ)WHO98/kg of waste combusted, which suggests that uncontrolled burning of household waste could be a major source of airborne PCDD/Fs in the United States.     

Radiocarbon content of synthetic and natural semi-volatile halogenated organic compounds

Some halogenated organic compounds, such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polybrominated diphenyl ethers (PBDEs), have been suggested to have natural sources but separating these compounds from their commercially synthesized counterparts is difficult. Molecular-level 14C analysis may be beneficial since most synthetic compounds are manufactured from petrochemicals (14C-free) and natural compounds should have "modern" or "contemporary" 14C levels. As a baseline study, we measured, for the first time, the 14C abundance in commercial PCB and PBDE mixtures, a number of organochlorine pesticides, as well as one natural product 2-(3',5'-dibromo-2'-methoxyphenoxy)-3,5-dibromoanisole. The latter compound was isolated from a marine sponge and is similar in structure to a PBDE. All of the synthetic compounds were 14C-free except for the pesticide toxaphene. which had a modern 14C abundance, as did the brominated natural compound. The result for toxaphene was not surprising since it was commercially synthesized by the chlorination of camphene derived from pine trees. These results suggest that measuring the 14C content of halogenated organic compounds may be quite useful in establishing whether organic compounds encountered in the environment have natural or synthetic origins (or both) provided that any synthetic counterparts derive from petrochemical feedstock.     

Atmospheric versus biological sources of polycyclic aromatic hydrocarbons (PAHs) in a tropical rain forest environment

To distinguish between pyrogenic and biological sources of PAHs in a tropical rain forest near Manaus, Brazil, we determined the concentrations of 21 PAHs in leaves, bark, twigs, and stem wood of forest trees, dead wood, mineral topsoil, litter layer, air, and Nasutitermes termite nest compartments. Naphthalene (NAPH) was the most abundant PAH with concentrations of 35 ng m(-3) in air (>85% of the sum of 21PAHs concentration), up to 1000 microg kg(-1) in plants (>90%), 477 microg kg(-1) in litter (>90%), 32 microg kg(-1) in topsoil (>90%), and 160 microg kg(-1) (>55%) in termite nests. In plants, the concentrations of PAHs in general decreased in the order leaves > bark > twigs > stem wood. The concentrations of most low-molecular weight PAHs in leaves and bark were near equilibrium with air, but those of NAPH were up to 50 times higher. Thus, the atmosphere seemed to be the major source of all PAHs in plants except for NAPH. Additionally, phenanthrene (PHEN) had elevated concentrations in bark and twigs of Vismia cayennensis trees (12-60 microg kg(-1)), which might have produced PHEN. In the mineral soil, perylene (PERY) was more abundant than in the litter layer, probably because of in situ biological production. Nasutitermes nests had the highest concentrations of most PAHs in exterior compartments (on average 8 and 15 microg kg(-1) compared to <3 microg kg(-1) in interior parts) and high PERY concentrations in all compartments (12-86 microg kg(-1)), indicating an in situ production of PERY in the nests. Our results demonstrate that the deposition of pyrolytic PAHs from the atmosphere controls the concentrations of most PAHs. However, the occurrence of NAPH, PHEN, and PERY in plants, termite nests, and soils at elevated concentrations supports the assumption of their biological origin.     

Quantification of variability and uncertainty in lawn and garden equipment NOx and total hydrocarbon emission factors

Variability refers to real differences in emissions among multiple emission sources at any given time or over time for any individual emission source. Variability in emissions can be attributed to variation in fuel or feedstock composition, ambient temperature, design, maintenance, or operation. Uncertainty refers to lack of knowledge regarding the true value of emissions. Sources of uncertainty include small sample sizes, bias or imprecision in measurements, nonrepresentativeness, or lack of data. Quantitative methods for characterizing both variability and uncertainty are demonstrated and applied to case studies of emission factors for lawn and garden (L&G) equipment engines. Variability was quantified using empirical and parametric distributions. Bootstrap simulation was used to characterize confidence intervals for the fitted distributions. The 95% confidence intervals for the mean grams per brake horsepower/hour (g/hp-hr) emission factors for two-stroke engine total hydrocarbon (THC) and NOx emissions were from -30 to +41% and from -45 to +75%, respectively. The confidence intervals for four-stroke engines were from -33 to +46% for THCs and from -27 to +35% for NOx. These quantitative measures of uncertainty convey information regarding the quality of the emission factors and serve as a basis for calculation of uncertainty in emission inventories (EIs).     

Using alcohol intoxication goggles (Fatal Vision® goggles) to detect alcohol related impairment in simulated driving

Objective: Fatal vision goggles (FVGs) are image-distorting equipment used within driver education programs to simulate alcohol-related impairment. However, there is no empirical evidence comparing the behavioral effects associated with wearing FVGs to alcohol intoxication. The purpose of this study was to determine the validity of FVGs in producing alcohol-related impairment in simulated driving.

Methods: Twenty-two healthy males (age: 23 ± 3 years, mean ± SD) participated in a placebo-controlled crossover design study involving 4 experimental trials. In each trial, participants completed a baseline level simulated driving task followed by an experimental driving task, involving one of 4 treatments: (1) a dose of alcohol designed to elicit 0.080% breath alcohol concentration (BrAC; AB), (2) an alcohol placebo beverage (PB), (3) FVG (estimated % blood alcohol concentration [BAC] 0.070–0.100+), and (4) placebo goggles (PGs). The driving tasks included 3 separate scenarios lasting ～5 min each; these were a simple driving scenario, a complex driving scenario, and a hazard perception driving scenario. Selected lateral control parameters (standard deviation of lane position [SDLP]; total number of lane crossings [LCs]) and longitudinal control parameters (average speed; standard deviation of speed [SDSP]; distance headway; minimum distance headway) were monitored during the simple and complex driving scenarios. Latency to 2 different stimuli (choice reaction time [CRT]) was tested in the hazard perception driving scenario. Subjective ratings of mood and attitudes toward driving were also provided during each of the trials.

Results: Neither placebo treatment influenced simulated driving performance. Mean BrAC was 0.060 ± 0.010% at the time of driving on the AB trial. Lateral control: In the simple driving scenario, SDLP and LC were not affected under any of the experimental treatments. However, in the complex driving scenario, significantly greater SDLP was observed on both the FVG and AB trials compared to their respective baseline drives. LC increased significantly from baseline on the AB trial only. Longitudinal control: Speed was not affected by any of the experimental treatments; however, SDSP increased significantly from baseline on the FVG trial. A significant reduction in distance headway and minimum distance headway was detected on the FVG trial compared to baseline. Hazard perception: Neither AB nor FVG trials were influential on CRT. Subjective mood ratings were significantly altered on the AB and FVG trials compared to baseline and placebo conditions. Participants reported reduced willingness and ability to drive under the active treatments (AB and FVG) than the placebo treatments (PB and PG).

Conclusions: FVGs may have some utility in replicating alcohol-related impairment on specific driving performance measurements. Hence, the equipment may offer an alternative approach to researching the impact of alcohol intoxication on simulated driving performance among populations where the provision of alcohol would otherwise be unethical (e.g., prelicensed drivers).