DENSITY CURRENT INTRUSIONS IN AN ICE-COVERED URBAN LAKE1

ABSTRACT: Evidence is presented that snowmelt runoff from an urban watershed can produce density current intrusions (underflows) in a lake. Several episodes of density current intrusions are documented. Water temperatures and salinities measured near the bottom of a 10 m deep Minneapolis lake during the late winter warming periods in 1989, 1990, 1991, and 1995 show significant rapid changes which are correlated with observed higher air temperatures and snowmelt runoff. The snowmelt runoff entering this particular lake (Ryan Lake) has increased electrical conductivity, salinity, and density. The source of the salinity is the salt spread on urban streets in the winter. Heating of littoral waters in spring may also contribute to the occurrence of the sinking flows, but is clearly not the only cause.     

Review of information on pesticide residues in the Canadian environment

Summary Pesticide residues in soil, water, food, wildlife and other media have been analysed in several monitoring studies. The purpose was to establish the distribution of these residues across a defined area, ascertain their trend over a specific period and use the results to assess environmental compliance and safety. In the present review the availability of information on pesticide residues in various Canadian environmental components was sought. With the possible exception of localized pesticide contamination of some private water supply wells, ground and surface water, most analyses revealed concentrations below guideline limits. Only a few cases were reported of mishandling, misuse and poisoning from pesticides. Continuing surveillance programmes and in-depth and well-organized monitoring studies, with special focus on areas that are vulnerable to contamination, by both provincial and federal governments, are largely responsible for the encouraging results. This experience in the control of pesticide use and monitoring of residues in the environment should be of particular interest in developing countries.Dr A.Y. Sangodoyin is a senior lecturer in the Department of Agricultural Engineering at the University of Ibadan. He was recently involved in a study visit to the University of Alberta, Edmonton, Alberta, Canada T6G 2G7, where his co-author Dr D.W. Smith is a member of staff in the Department of Civil-Engineering.     

UNCERTAINTY IN ESTIMATING BANKFULL CONDITIONS1

ABSTRACT: Bankfull depth and discharge are basic input parameters to stream planform, stream restoration, and highway crossing designs, as well as to the development of hydraulic geometry relationships and the classification of streams. Unfortunately, there are a wide variety of definitions for bankfull that provide a range of values, and the actual selection of bankfull is subjective. In this paper, the relative uncertainty in determining the bankfull depth and discharge is quantified, first by examining the variability in the estimates of bankfull and second by using fuzzy numbers to describe bankfull depth. Fuzzy numbers are used to incorporate uncertainty due to vagueness in the definition of bankfull and subjectivity in the selection of bankfull. Examples are provided that demonstrate the use of a fuzzy bankfull depth in sediment trans. port and in stream classification. Using fuzzy numbers to describe bankfull depth rather than a deterministic value allows the engineer to base designs and decisions on a range of possible values and associated degrees of belief that the bankfull depths take on each value in that range.     

WASTE LOADINGS FROM A FRESHWATER ATLANTIC SALMON FARM IN SCOTLAND1

ABSTRACT: Recent studies suggest that waste generation from the freshwater phase of Atlantic salmon (Salmo salar L.) production varies considerably on an annual basis. A fish farm on the West Coast of Scotland was visited regularly during a two-year period to determine inflow and outflow water quality. Waste output budgets of suspended solids (SS), biochemical oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP), total ammonia nitrogen (TAN = NH₃+NH₄⁺), dissolved reactive phosphorus (DRP) and total phosphorus (TP) were produced. The annual waste loadings obtained were 71 kg TN t fish^?1 yr^?1 (one year of data only), 10.9–11.1 kg TP t fish^?1 yr^?1, 1.2–2.1 kg DRP t fish^?1 yr^?1, 422–485 kg BOD₅ t fish^?1 yr^?1, 327–337 kg SS t fish^?1 yr^?1, and 30–35 kg TAN-N t fish^?1 yr^?1. Simple linear regression models relating waste parameter production to water temperature and feeding regime were developed. When compared to existing data for other salmonid production systems, greater ranges of daily waste loadings were observed. Wide variations in concentrations of these parameters during a daily cycle were also observed, suggesting that mass balance estimates of waste production will provide more robust estimates of waste output than frequent monitoring of outflow water quality.     

Groundwater Remediation and Aquifer Clean-Up: A Case Study

Groundwater was being remediated with pump and treat technology at a facility where the groundwater was contaminated with commonly used degreaser solvents. Hydraulic conductivity of the heterogeneous residuum was beneficiated by applying pneumatic fracturing technology. The remedial system was controlled and monitored by a sophisticated remote telemetry system. A case history follows.     

Remediation of acid mine drainage leachate by a physicochemical and biological treatment‐train approach

Biological and physicochemical approaches were utilized in a treatment train for acid mine dis charge (AMD) waters. Anaerobic bioreactors, chemical precipitation reactors, and biopolymer chelation reactors, operated in static, semicontinuous, and continuous flow modes, removed significant quantities of metals and sulfates associated with AMD water. Static tests indicated accept able copper removal via precipitation by generation of hydrogen sulfide in anaerobic reactors. However, low pH affected the biopolymer coating in the chelation reactor, resulting in loss of bed surface. Corrections of AMD to pH > 7 resulted in some metal precipitationprior to biopolymer treatment. A series of static semicontinuous tests at pH 5.0 provided improved metal and sulfate removal. Copper (Cu⁺) was reduced to trace concentrations, while manganese (Mn⁺), although reduced, proved to be the most recalcitrant of the metals. © 2006 Wiley Periodicals, Inc.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.