Impact of redox conditions on metolachlor and metribuzin degradation in Mississippi flood plain soils

The effect of soil redox conditions on the degradation of metolachlor and metribuzin in two Mississippi soils (Forrestdale silty clay loam and Loring silt loam) were examined in the laboratory. Herbicides were added to soil in microcosms and incubated either under oxidized (aerobic) or reduced (anaerobic) conditions. Metolachlor and metribuzin degradation under aerobic condition in the Forrestdale soil proceeded at rates of 8.83 ngd(-1) and 25 ngd(-1), respectively. Anaerobic degradation rates for the two herbicides in the Forestdale soil were 8.44 ngd(-1) and 32.5 ngd(-1), respectively. Degradation rates for the Loring soil under aerobic condition were 24.8 ngd(-1) and 12.0 ngd(-1) for metolachlor and metribuzin, respectively. Metolachlor and metribuzin degradation rates under anaerobic conditions in the Loring soil were 20.9 ngd(-1) and 5.35 ngd(-1). Metribuzin degraded faster (12.0 ngd(-1)) in the Loring soil under aerobic conditions as compared to anaerobic conditions (5.35 ngd(-1)).     

Evaluation of the genotoxic and cytochrome P450 monooxygenase-inhibitory potential of Dicuran on procaryotic and eucaryotic test systems

The effect of the herbicide Dicuran 500 FL (formulated product) on the phenotypical and genotypical changes in procaryotic and eucaryotic organisms was investigated using short-term tests for detecting genotoxins. Since pesticides discharged in the water environment can modulate the mixed-function monooxygenases (MFO) detoxification system of water organisms, the in vivo and in vitro effects of Dicuran on hepatic cytochrome P450 (cyt P450) monooxygenase activities were also examined in juvenile carp (Cyprinus carpio L.). By measuring the activities of MFO in experimental carp exposed to Dicuran an attempt was made to establish whether Dicuran could be bioactivated by MFO into ultimate mutagens. Our results on the bacterial strains Salmonella typhimurium TA100 and TA98 show that Dicuran does not possess either mutagenic or premutagenic characteristics. The micronucleus test on the erythrocytes of experimental carp did not establish any clastogenic effect either. However, Dicuran significantly inhibited the MFO activity of 7-ethoxyresorufin-O-deethylase (EROD) and benzo[a]pyrene monooxygenase (BaPMO) in the liver of experimental carp in vitro, as well as in in vivo conditions. These findings demonstrate the potentially damaging effect of Dicuran on the xenobiotic metabolizing enzyme systems of fish, and suggest the applicability of described methods for the prediction of the ecotoxicological significance of the presence of pesticides in the water environment.     

A life-cycle comparison of alternative automobile fuels

We examine the life cycles of gasoline, diesel, compressed natural gas (CNG), and ethanol (C2H5OH)-fueled internal combustion engine (ICE) automobiles. Port and direct injection and spark and compression ignition engines are examined. We investigate diesel fuel from both petroleum and biosources as well as C2H5OH from corn, herbaceous bio-mass, and woody biomass. The baseline vehicle is a gasoline-fueled 1998 Ford Taurus. We optimize the other fuel/powertrain combinations for each specific fuel as a part of making the vehicles comparable to the baseline in terms of range, emissions level, and vehicle lifetime. Life-cycle calculations are done using the economic input-output life-cycle analysis (EIO-LCA) software; fuel cycles and vehicle end-of-life stages are based on published model results. We find that recent advances in gasoline vehicles, the low petroleum price, and the extensive gasoline infrastructure make it difficult for any alternative fuel to become commercially viable. The most attractive alternative fuel is compressed natural gas because it is less expensive than gasoline, has lower regulated pollutant and toxics emissions, produces less greenhouse gas (GHG) emissions, and is available in North America in large quantities. However, the bulk and weight of gas storage cylinders required for the vehicle to attain a range comparable to that of gasoline vehicles necessitates a redesign of the engine and chassis. Additional natural gas transportation and distribution infrastructure is required for large-scale use of natural gas for transportation. Diesel engines are extremely attractive in terms of energy efficiency, but expert judgment is divided on whether these engines will be able to meet strict emissions standards, even with reformulated fuel. The attractiveness of direct injection engines depends on their being able to meet strict emissions standards without losing their greater efficiency. Biofuels offer lower GHG emissions, are sustainable, and reduce the demand for imported fuels. Fuels from food sources, such as biodiesel from soybeans and C2H5OH from corn, can be attractive only if the co-products are in high demand and if the fuel production does not diminish the food supply. C2H5OH from herbaceous or woody biomass could replace the gasoline burned in the light-duty fleet while supplying electricity as a co-product. While it costs more than gasoline, bioethanol would be attractive if the price of gasoline doubled, if significant reductions in GHG emissions were required, or if fuel economy regulations for gasoline vehicles were tightened.     

Mussel watch: a review of Cu and other metals in various marine organisms in Taiwan, 1991-98

This study presents the distribution of Cu, Zn, Pb, Cd, Hg and As in various marine organisms collected along the western coast of Taiwan from 1991 to 1998, and also evaluates the time variation of Cu in oysters before (1980-85) and after (1986-98) the "green oyster" incident. The results show that relatively high geometric mean (GM) concentrations of Cu, Zn, Pb, Cd, As and Hg were generally found in Crassostrea gigas (Cu=229 microg/g, Zn=783 microg/g), Gomphina aeguialtera (Pb=30.3 microg/g), Tegillarca granosa (Cd=2.85 microg/g), Thais clavigera (As=96.9 microg/g) and Parapenaeopsis cornuta (Hg=1.35 microg/g), respectively. Especially, maximum Cu and Zn concentrations (GM=229 and 783 microg/g, respectively) in oysters (C. gigas) from different culture areas were much higher than those of the other organisms by about 1.13-458 and 2.40-63.7 times, respectively. Similarly, rock-shells (Thais clavigera) had a high capacity for accumulating Cu (GM=202 microg/g) and Zn (GM=326 microg/g) under the same physico-chemical conditions. The highest GM Cu and Zn concentrations of 1108 (range from 113 to 2806) and 1567 (range from 303 to 3593) microg/g were obtained in oysters from the Hsiangshan coastal area, one of the most important oyster culture areas in Taiwan. However, the highest GM Cd and As concentrations of 6.82 and 19.3 microg/g were found in oysters from the Machu Islands. Mean Cu concentrations in the oysters from the Erhjin Chi estuary declined from 2194+/-212 microg/g in 1986-90 to 545 microg/g (GM) in 1991-96. In the Hsiganshan area, GM Cu concentrations of 909 microg/g (1991-96) and 1351 microg/g (1997-98) in oysters were significantly higher than those of 201 microg/g (1980-85) and 682 microg/g (1986-90). The gradually increasing levels of Cu and Zn in the oysters from the Hsiangshan area have been observed year by year.     

Widespread contamination by tris(4-chlorophenyl)methane and tris(4-chlorophenyl)methanol in cetaceans from the North Pacific and Asian coastal waters

For understanding global distribution, transport and behavior of tris(4-chlorophenyl)methane (TCPMe) and tris(4-chlorophenyl)methanol (TCPMOH), the two newly identified microcontaminants, the present study determined their concentrations and other persistent organochlorines (OCs) in the blubber of nine species of adult male cetaceans collected from various locations in the North Pacific Ocean and coastal waters of some Asian countries, during 1985-97. Concentrations of TCPMe and TCPMOH were found to be highest in northern right whale dolphins, which may be attributable to wide distribution of this species, including some heavily polluted areas such as coastal California. Elevated residue levels of TCPMe and TCPMOH were observed in both off-shore and coastal species, suggesting widespread contamination of these compounds in the marine environment. Higher contamination of TCPMe and TCPMOH was found in cetaceans from temperate and cold waters than those from tropical regions. The latitudinal distribution of TCPMe and TCPMOH in cetaceans from the North Pacific and Asian coastal waters was similar to that of DDTs, suggesting less transportable nature of TCPMe and TCPMOH in the marine environment. Data on the occurrence of TCPMe and TCPMOH further indicated high bioaccumulation potential of these compounds, which was comparable to DDTs. Relative concentrations of TCPMe/TCPMOH in cetaceans were apparently higher than those observed in seals, suggestive of lower metabolic capacity for these compounds in cetaceans than in pinnipeds, which is similar to classic contaminants like polychlorinated biphenyls and DDTs.     

Plagiochasma appendiculatum as a biotest for water quality assessment

A thalloid pathogen-free liverwort, Plagiochasma appendiculatum, was exposed to different pollution stresses, especially heavy metals, synthesized in the laboratory, to simulate pollutants reported to occur in industrial areas. The plant was found to be sensitive to mercury and copper. Thallus injury and chlorophyll content showed effects with increasing exposure to metals. In contrast, the plant was found to be resistant to lead, zinc and chromium. The plant showed growth in some concentrations of these metals, hence suggesting their accumulation. In this paper, the possible use of Plagiochasma in the assessment of water quality, especially for heavy metals, is discussed, with special reference to thallus deterioration as a simple biomonitoring parameter.     

Development of a multi-factor model for predicting the effects of ambient ozone on the biomass of white clover

Results are presented from the UN/ECE ICP Vegetation (International Cooperative Programme on effects of air pollution on natural vegetation and crops) experiments in which ozone(O(3))-resistant (NC-R) and -sensitive (NC-S) clones of white clover (Trifolium repens cv. Regal) were exposed to ambient O(3) episodes at 14 sites in eight European countries in 1996, 1997 and 1998. The plants were grown according to a standard protocol, and the forage was harvested every 28 days for 4-5 months per year by excision 7 cm above the soil surface. Biomass ratio (NC-S/NC-R) was related to the climatic and pollutant conditions at each site using multiple linear regression (MLR) and artificial neural networks (ANNs). Twenty-one input parameters [e.g. AOT40, 7-h mean O(3) concentration, daylight vapour pressure deficit (VPD), daily maximum temperature] were considered individually and in combination with the aim of developing a model with high r(2) and simple structure that could be used to predict biomass change in white clover. MLR models were generally more complex, and performed less well for unseen data than non-linear ANN models. The ANN model with the best performance had five inputs with an r(2) value of 0.84 for the training data, and 0.71 for previously unseen data. Two inputs to the model described the O(3) conditions (AOT40 and 24-h mean for O(3)), two described temperature (daylight mean and 24-h mean temperature), and the fifth input appeared to be differentiating between semi-urban and rural sites (NO concentration at 17:00). Neither VPD nor harvest interval was an important component of the model. The model predicted that a 5% reduction in biomass ratio was associated with AOT40s in the range 0.9-1.7 ppm x h (microl l(-1) h) accumulated over 28 days, with plants being most sensitive in conditions of low NO(x), medium-range temperature, and high 24-h mean O(3) concentration.     

Bioavailability of persistent organic pollutants in soils and sediments--a perspective on mechanisms, consequences and assessment

It has been observed that as soil-pollutant contact time increases, pollutant bioavailability and extractability decreases. This phenomenon has been termed 'ageing'. Decreased chemical extractability with increased soil-chemical contact time is evident where both 'harsh' techniques, e.g. dichloromethane Soxhlet extraction, and 'non-exhaustive' techniques, e.g. butanol shake extraction, have been used. It has also been observed that the amount of chemical extracted by these techniques varies considerably over time. Similarly, decreases in bioavailability with increased soil-pollutant contact time have been described in bacterial, earthworm and other organism studies. From these investigations, it has been shown that the fraction of pollutant determined to be bioavailable can vary between organisms. Thus, there is an immediate definition problem, what is bioavailability? Additionally, if bioavailability is to be assessed by a chemical means, which organisms should (or can) be mimicked by the extraction procedure? This review provides a background to the processes inherent to ageing, a discussion of its consequences on bioavailability and ends with some reflections on the appropriateness of chemical extraction techniques to mimic bioavailability     

Bound pesticide residues in soils: a review

This article is a review of the current state of knowledge regarding the formation and biological/environmental significance of bound pesticide residues in soils. We begin by defining various terms used in our discussions and identifying the types/classes of pesticides which may be added to soil and interact with it. We then consider various soil properties and aspects of land management which will influence the nature and degree of the soil-pesticide association and discuss the possible physical and chemical binding mechanisms. We then move on to consider the role of microorganisms and other forms of soil biota in bound residue formation and the bioavailability of soil-borne pesticide residues. The review ends with a consideration of the significance of bound pesticide residues.     

In situ sequential treatment of a mixed contaminant plume

Groundwater plumes often contain a mixture of contaminants that cannot easily be remediated in situ using a single technology. The purpose of this research was to evaluate an in situ treatment sequence for the control of a mixed organic plume (chlorinated ethenes and petroleum hydrocarbons) within a Funnel-and-Gate. A shallow plume located in the unconfined aquifer at Alameda Point, CA, was found to contain up to 218,000 μg/l of cis-1,2 dichloroethene (cDCE), 16,000 μg/l of vinyl chloride (VC) and <1000 μg/l of 1,1 dichloroethene (1,1 DCE), trans-1,2 dichloroethene (trans-1,2 DCE) and trichloroethene (TCE). Total benzene, toluene, ethylbenzene and xylenes (BTEX) concentrations were <10,000 μg/l. Contaminated groundwater was funneled into a gate, 3.0 m wide, 4.5 m long and 6.0 m deep (keyed into the underlying aquitard) where treatment occurred. The initial gate segment consisted of granular iron, for the reductive dechlorination of the higher chlorinated ethenes. The second segment, the biosparge zone, promoted aerobic biodegradation of petroleum hydrocarbons and any remaining lesser-chlorinated compounds, stimulated by dissolved oxygen (DO) and carbon dioxide (CO₂) additions via an in situ sparge system (CO₂ was used to neutralize the high pH produced from reactions in the iron wall). Groundwater was drawn through the gate by pumping two wells located at the sealed, downgradient, end. Over a 4-month period an estimated 1350 g of cDCE flowed into the treatment gate and the iron wall removed 1230 g, or 91% of the mass. The influent mass of VC was 572 g and the iron wall removed 535 g, corresponding to 94% mass removal. The other chlorinated ethenes had significantly lower influent masses (3 to 108 g) and the iron wall removed the majority of the mass resulting in >96% mass removal for any of the compounds. In spite of these high removal percentages, laboratory column tests indicated that at these levels of chlorinated contaminants, surface saturation of the iron grains likely contributed to lower than expected reaction rates. In the biosparge zone, mass removal of cDCE appeared to occur predominantly by biodegradation (65%) with volatilization (35%) being an important secondary process. The dominant removal process for VC was volatilization (70%) although significant biodegradation was also indicated (30%). Laboratory microcosm results confirmed the potential for aerobic biodegradation of cDCE and VC. When average influent field concentrations for cDCE and VC were 220,000 and 46,000 μg/l, respectively, the sequential treatment unit removed 99.6% of the total mass and when the influent concentrations decreased to 26,000 and 19,000 μg/l for cDCE and VC, respectively, >99.9% removal within the treatment gate was attained. BTEX compounds were found to be significantly retarded in the iron treatment zone. Although they did eventually break through the granular iron, and into the gravel transition zone, none of these compounds was detected in the biosparge zone. No noticeable interferences between the anaerobic (reductive) and aerobic parts of the system occurred during testing. The results of this experiment show that in situ treatment sequences are viable, although further work is needed to optimize performance.