Reef development at Inhaca Island,Mozambique: coral communities and impacts of the 1999/2000 Southern African floods

Inhaca Island, southern Mozambique, is located towards the southerly latitudinal limits of coral reef growth. Reef development is restricted to the margins of channels which dissect intertidal flats on the Maputo Bay side of the island, and to depths of around 6 m. In contrast to lower latitude reefs, reef development is therefore both spatially and bathymetrically restricted (largely due to high turbidity levels). These natural stress levels were exacerbated, via increased freshwater and sediment discharge, during the severe floods of late 1999/early 2000. Flood impacts varied but were most significant on reefs on the inner (western) side of the island where live coral cover (LCC) decreased from 60.5% (1999) to 24.0% (2001). This is attributed to freshwater-induced bleaching. Dead in situ coral cover increased from 18.6% (1999) to 51.3% (2001). Reefs on the southern tip of the island, by contrast, were relatively unaffected. It is suggested that this largely reflects a closer proximity to the open Indian Ocean which mitigated the effects of freshwater dilution.     

Quantification of variability and uncertainty in air pollutant emission inventories: method and case study for utility NOx emissions

The quality of stationary source emission factors is typically described using data quality ratings, which provide no quantification of the precision of the emission factor for an average source, nor of the variability from one source to another within a category. Variability refers to actual differences caused by differences in feedstock composition, design, maintenance, and operation. Uncertainty refers to lack of knowledge regarding the true emissions. A general methodology for the quantification of variability and uncertainty in emission factors, activity factors, and emission inventories (EIs) is described, featuring the use of bootstrap simulation and related techniques. The methodology is demonstrated via a case study for a selected example of NOx emissions from coal-fired power plants. A prototype software tool was developed to implement the methodology. The range of interunit variability in selected activity and emission factors was shown to be as much as a factor of 4, and the range of uncertainty in mean emissions is shown to depend on the interunit variability and sample size. The uncertainty in the total inventory of -16 to +19% was attributed primarily to one technology group, suggesting priorities for collecting data and improving the inventory. The implications for decision-making are discussed.     

Environmental effects on the distribution of corallimorpharians in Tanzania

This study examined the distribution and abundance of corallimorpharians (Cnidaria, Anthozoa) in Tanzania in relation to different aspects of the coral reef environment. Five reefs under varying degrees of human disturbance were investigated using the line intercept transect and point technique. Corallimorpharian growth and the composition of the substratum were quantified in different habitats within reefs: the inner and middle reef flat, the reef crest, and at the 2 and 4 m depths on the reef slope. Corallimorpharians occurred on all the reefs and 5 species were identified: Rhodactis rhodostoma, R. mussoides, Ricordea yuma, Actinodiscus unguja and A. nummiforme. R. rhodostoma was the dominant corallimorpharian at all sites. Within reefs, they had the highest densities in the shallow habitats. While R. rhodostoma occurred in all habitats, the other corallimorpharian species showed uneven distributions. Corallimorpharians ranked second, after scleractinian coral, in percent living cover. Results from this study suggested that corallimorpharians benefitted from disturbance compared with other sessile organisms. They preferred inhabiting areas with dead coral, rock and rubble whilst live coral was avoided. There was a positive relationship between percent cover of corallimorpharians and water turbidity and they dominated the more disturbed reefs, i.e. reefs that were affected by higher nutrient loads and fishing.     

Field method comparison between passive air samplers and continuous monitors for Vocs and NO2 in El Paso, Texas

This study evaluates the performance of Model 3300 Ogawa Passive Nitrogen Dioxide (NO2) Samplers and 3M 3520 Organic Vapor Monitors (OVMs) by comparing integrated passive sampling concentrations to averaged hourly NO2 and volatile organic compound (VOC) measurements at two sites in El Paso, TX. Sampling periods were three time intervals (3-day weekend, 4-day weekday, and 7-day weekly) for three consecutive weeks. OVM concentrations were corrected for ambient pressure to account for higher elevation. Precise results (< 5% relative standard deviation, RSD) were found for NO2 measurements from collocated Ogawa samplers. Reproducibility was lower from duplicate OVMs for BTEX (benzene, toluene, ethylbenzene, and xylene isomers) VOCs (> or = 77% RSD for 2-day samples) with better precision for longer sampling periods. Comparison of Ogawa NO2 samplers with chemiluminescence measurements averaged over the same time period suggested potential calibration problems with the chemiluminescence analyzer. For BTEX species, generally good agreement was obtained between OVMs and automated-gas chromatograph (auto-GC) measurements. The OVMs successfully tracked increasing levels of VOCs recorded by the auto-GCs. However, except for toluene, OVM BTEX measurements generally exceeded their continuous counterparts with a mean bias of 5-10%. Although interpretation of the study results was limited due to small sample sizes, diffusion barrier influences caused by shelters that housed OVMs and differences in sampling heights between OVMs and auto-GC inlet may explain the overestimation.     

Quantification of hourly variability in NO(x) emissions for baseload coal-fired power plants

The objectives of this paper are to (1) quantify variability in hourly utility oxides of nitrogen (NO(x)) emission factors, activity factors, and total emissions; (2) investigate the autocorrelation structure and evaluate cyclic effects at short and long scales of the time series of total hourly emissions; (3) compare emissions for the ozone (O3) season versus the entire year to identify seasonal differences, if any; and (4) evaluate interannual variability. Continuous emissions monitoring data were analyzed for 1995 and 1998 for 32 units from nine baseload power plants in the Charlotte, NC, airshed. Unit emissions have a strong 24-hr cycle attributable primarily to the capacity factor. Typical ranges of the coefficient of variation for emissions at a given hour of the day were from 0.2 to 0.45. Little difference was found when comparing weekend emissions with the entire week or when comparing the O3 season with the entire year. There were substantial differences in the mean and standard deviation of emissions when comparing 1995 and 1998 data, indicative of the effect of retrofits of control technology during the intervening time. The wide range of variability and its autocorrelation should be accounted for when developing probabilistic utility emission inventories for analysis of near-term future episodes.     

The benefits of lower ozone due to air pollution emission reductions (2002–2011) in the Eastern United States during extreme heat

ABSTRACT

Using the Community Multiscale Air Quality (CMAQ) model and the Benefits Mapping and Analysis Program – Community Edition (BenMAP-CE) tool, we estimate the benefits of anthropogenic emission reductions between 2002 and 2011 in the Eastern United States (US) with respect to surface ozone concentrations and ozone-related health and economic impacts, during a month of extreme heat, July 2011. Based on CMAQ simulations using emissions appropriate for 2002 and 2011, we estimate that emission reductions since 2002 likely prevented 10– 15 ozone exceedance days (using the 2011 maximum 8-hr average ozone standard of 75 ppbv) throughout the Ohio River Valley and 5– 10 ozone exceedance days throughout the Washington, DC – Baltimore, MD metropolitan area during this extremely hot month. CMAQ results were fed into the BenMAP-CE tool to determine the health and health-related economic benefits of anthropogenic emission reductions between 2002 and 2011. We estimate that the concomitant health benefits from the ozone reductions were significant for this anomalous month: 160–800 mortalities (95% confidence interval (CI): 70–1,010) were avoided in July 2011 in the Eastern U.S, saving an estimated $1.3–$6.6 billion (CI: $174 million–$15.5 billion). Additionally, we estimate that emission reductions resulted in 950 (CI: 90–2,350) less hospital admissions from respiratory symptoms, 370 (CI: 180–580) less hospital admissions for pneumonia, 570 (CI: 0–1650) less Emergency Room (ER) visits from asthma symptoms, 922,020 (CI: 469,960–1,370,050) less minor restricted activity days (MRADs), and 430,240 (CI: ?280,350–963,190) less symptoms of asthma exacerbation during July 2011.

Implications: We estimate the benefits of air pollution emission reductions on surface ozone concentrations and ozone-related impacts on human health and the economy between 2002 and 2011 during an extremely hot month, July 2011, in the eastern United States (US) using the CMAQ and BenMAP-CE models. Results suggest that, during July 2011, emission reductions prevented 10-15 ozone exceedance days in the Ohio River Valley and 5-10 ozone exceedance days in the Mid Atlantic; saved 160-800 lives in the Eastern US, saving $1.3 - $6.5 billion; and resulted in 950 less hospital admissions for respiratory symptoms, 370 less hospital admissions for pneumonia, 570 less Emergency Room visits for asthma symptoms, 922,020 less minor restricted activity days, and 430,240 less symptoms of asthma exacerbation.     

The effect of low molecular weight chelators on iron chelation and free radical generation as studied by ESR measurement

The purpose of this work was to improve our current knowledge of the non-enzymatic mechanisms involved in brown rot fungal decay of wood, but also to improve our understanding of chelator-mediated reactions that may occur in other biological systems where low pH conditions may prevail. Several key steps (iron chelation and reduction) during early non-enzymatic wood decay processes have been studied by using electron spin resonance (ESR). It has been proposed that low molecular weight chelators as well as Fenton reagents are involved in brown rot decay, at least in early non-enzymatic stages. In this work, the binding between a catecholate model chelator and ferric iron was studied by ESR spectroscopy. The effects of the model chelator, Fenton reagents, as well as the reaction conditions on free radical generation were also studied using ESR spin-trapping techniques. The results indicate: (1) The relative quantity of the chelator-iron complex can be determined by measurement of the intensities of the characteristic g = 4.3 ESR signal. (2) The effects of the chelator:iron ratio, the pH, and other reaction parameters on the hydroxyl radical generation in a Fenton type system can be determined using ESR spin-trapping techniques. (3) Data support the hypothesis that superoxide radicals are involved in chelator-mediated Fenton processes.     

Determination of levoglucosan in atmospheric fine particulate matter

A microanalytical method suitable for the quantitative determination of the sugar anhydride levoglucosan in low-volume samples of atmospheric fine particulate matter (PM) has been developed and validated. The method incorporates two sugar anhydrides as quality control standards. The recovery standard sedoheptulosan (2,7-anhydro-beta-D-altro-heptulopyranose) in 20 microL solvent is added onto samples of the atmospheric fine PM and aged for 1 hr before ultrasonic extraction with ethylacetate/ triethylamine. The extract is reduced in volume, an internal standard is added (1,5-anhydro-D-mannitol), and a portion of the extract is derivatized with 10% by volume N-trimethylsilylimidazole. The derivatized extract is analyzed by gas chromatography/mass spectrometry (GC/MS). The recovery of levoglucosan using this procedure was 69 +/- 6% from five filters amended with 2 microg levoglucosan, and the reproducibility of the assay is 9%. The limit of detection is approximately 0.1 microg/mL, which is equivalent to approximately 3.5 ng/m3 for a 10 L/min sampler or approximately 8.7 ng/m3 for a 4 L/min personal sampler (assuming 24-hr integrated samples). We demonstrated that levoglucosan concentrations in collocated samples (expressed as ng/m3) were identical irrespective of whether samples were collected by PM with aerodynamic diameter < or = 2.5 microm or PM with aerodynamic diameter < or = 10 microm impactors. It was also demonstrated that X-ray fluorescence analysis of samples of atmospheric PM, before levoglucosan determinations, did not alter the levels of levoglucosan.     

Ah receptor for 2,3,7,8-tetrachlorodibenzo-p-dioxin: Comparative studies in mammalian and nonmammalian species

The Ah receptor was identified and characterized in cytosol from a large number of diverse animal species. Molecular properties of the Ah receptor were similar in all species which had detectable receptor. However, subtle differences in receptor properties exist among animal species and these differences indicate that the Ah receptor protein is not identical in all species. It is not yet known whether differences in receptor properties among animal species play a significant role in determining differential susceptibility of the species to toxicity from halogenated aromatic compounds.