Mercury in small Illinois fishes: historical perspectives and current issues

Documenting long-term trends in mercury deposition and/or accumulation is important in setting regulatory benchmarks, modeling contaminant transfer and flux, measuring success of environmental controls, and even assigning responsibility for pollution. We conducted a study to compare mercury concentrations in small fishes from “high-mercury” and “low-mercury” regions of Illinois, as well as to examine historic patterns of mercury availability using preserved fishes. Mercury concentrations were greater in four species of small fishes collected from a stream in a “high-mercury” region than in those same taxa collected from a stream in a “low-mercury” area in Illinois. Mercury concentrations in blackstripe topminnows (Fundulus notatus) declined dramatically between 1900 and 1961/2006 in the “high-mercury” stream, presumably due reductions in mercury releases from local and regional sources. Preserved fish had an apparent increase in mercury concentrations for up to 12 months, which is consistent with changes in mass and loss of proteins observed in other studies, and we recommend that recent samples be preserved for at least 12 months before comparison with older fluid-preserved material. Based on our results, further studies of mercury in small fishes in Illinois streams appear warranted.     

An assessment of fecal indicator and other bacteria from an urbanized coastal lagoon in the City of Los Angeles, California, USA

A study was performed in Del Rey Lagoon, City of Los Angeles, to determine if the lagoon was as a source or sink for fecal indicator bacteria (FIB: total coliforms, Escherichia coli, enterococci) and to screen for the presence of other potentially pathogenic bacteria. The lagoon receives tidal flows from the adjacent Ballona Estuary whose water usually is contaminated with FIB originating from the highly urbanized Ballona Creek Watershed. During 16 sampling events from February 2008 through March 2009, replicate water samples (n?=?3) were collected 1 h prior to the high tide and 1 h prior to the following low tide. FIB concentrations were measured by the defined substrate method (IDEXX, Westbrook, Me) followed by culturing of bacterial isolates sampled from positive IDEXX Quanti-Tray wells and were identified using the Vitek 2 Compact (bioMérieux, Durham, NC). Mean concentrations of FIB often differed by an order of magnitude from flood to ebb flow conditions. The lagoon tended to act as a sink for total coliforms based on the ratio of mean flood to ebb densities (R _F/E) >1.0 during 56 % of the sampling events and during ebb flows, as a source for E. coli and enterococci (R _F/E <1.69 % of events). Approximately 54 species were identified from 277 isolates cultured from the IDEXX Quanti-Trays. Of these, 54 % were species known to include pathogenic strains that can be naturally occurring, introduced in runoff, or originated from other sources. Diversity and cluster analyses indicated a dynamic assemblage that changes in species composition with day-to-day fluctuations as well as tidal action. The concept of monitoring the lagoon and estuary as a sentinel habitat for pathogenic assemblages is discussed.     

Preparation and measurement methods for studying nanoparticle aggregate surface chemistry

Despite best efforts at controlling nanoparticle (NP) surface chemistries, the environment surrounding nanomaterials is always changing and can impart a permanent chemical memory. We present a set of preparation and measurement methods to be used as the foundation for studying the surface chemical memory of engineered NP aggregates. We attempt to bridge the gap between controlled lab studies and real-world NP samples, specifically TiO(2), by using well-characterized and consistently synthesized NPs, controllably producing NP aggregates with precision drop-on-demand inkjet printing for subsequent chemical measurements, monitoring the physical morphology of the NP aggregate depositions with scanning electron microscopy (SEM), acquiring "surface-to-bulk" mass spectra of the NP aggregate surfaces with time-of-flight secondary ion mass spectrometry (ToF-SIMS), and developing a data analysis scheme to interpret chemical signatures more accurately from thousands of data files. We present differences in mass spectral peak ratios for bare TiO(2) NPs compared to NPs mixed separately with natural organic matter (NOM) or pond water. The results suggest that subtle changes in the local environment can alter the surface chemistry of TiO(2) NPs, as monitored by Ti(+)/TiO(+) and Ti(+)/C(3)H(5)(+) peak ratios. The subtle changes in the absolute surface chemistry of NP aggregates vs. that of the subsurface are explored. It is envisioned that the methods developed herein can be adapted for monitoring the surface chemistries of a variety of engineered NPs obtained from diverse natural environments.     

The puzzle of North America's Late Pleistocene megafaunal extinction patterns: Test of new explanation yields unexpected results

Although Late Pleistocene extinctions disproportionately affected larger mammalian species, numerous smaller species were also lost. To date, no satisfactory explanation has been presented to account for this pattern. Beginning with the assumption that human predation caused the extinctions, we offer and test the first such explanatory hypothesis, which is predicated on considering more realistic functional response forms (i.e., those that allow for predator interference or prey sharing). We then test the hypothesis via a one-predator, six-prey ecological model that maintains transparency, minimalism of design, and maximal constraint of parameters. Results indicate that altering assumptions about one cornerstone of ecological modeling (i.e., functional response) fails to produce qualitative differences in survival–extinction outcomes—even in conjunction with a wide range of capture efficiency permutations. This unexpected finding suggests that no reasonable form of predation alone is capable of producing the survival–extinction pattern observed. We conclude that the matter of causation and the conclusions of previous Late Pleistocene extinction models remain far less certain than many have assumed.     

Spatiotemporal Dynamics of Endangered Species Hotspots in the United States

Abstract: Given limited resources, many researchers advocate focusing conservation efforts on hotspots, geographical areas with high numbers of species (i.e., richness), endemic species, rare or threatened species, and/or high levels of threat to species survival. The hotspot approach is an efficient and simple way to conserve species diversity, assuming that hotspots do not change over space or time. We tested whether hotspots change across space and time using a database of endangered and threatened species listed by the U.S. government from 1967 to 1999. We determined hotspots based on the cumulative set of species listed for three overlapping and successively longer time periods: 1967–1979, 1967–1989, and 1967–1999. We used minimum area complimentarity analysis, which selected the smallest set of areas (in our study, U.S. counties) needed to represent a chosen set of species. Over time, the number of endangered and threatened species in the United States increased from 76 in 1967 to 1123 in 1999. As the number of species increased over time, hotspots changed in two ways: the number of hotspots increased and the rank of hotspots shifted. Hotspots increased from 84 in 1979, to 166 in 1989, to 217 in 1999. Only 63 of these counties were designated as hotspots in all three periods. The remaining changes resulted from addition and deletion of counties as hotspots over time. Some counties were removed from the list or changed in relative rank from one time period to the next regardless of their rank. Counties added as hotspots could rank anywhere on the list, and they were not merely low-ranking counties added to represent one or a few species. Therefore, hotspots serve as a useful tool for guiding conservation efforts but, given their spatiotemporal variability, do not represent a final solution.     

Anatomy of an urban waterbody: a case study of Boston's Muddy River

The objective of this study was to characterize and understand the water quality of Boston's Muddy River prior to restoration, to help guide those activities and evaluate their success. We use a combination of monitoring, data analysis and mathematical modeling. The seasonal pattern of temperature, pollutant signatures (identified using a principal component analysis), correlations with precipitation and spatial patterns all point to a significant wastewater input at one of the outfalls and suggest significant receiving water impact. However, a quantitative analysis using a mathematical model (QUAL2K) suggests this source is not significant. Rather, internal loading from algae, sediment bed and waterfowl dominate the spatial pattern of water quality. These results suggest significant improvement can be expected from planned sediment dredging. The paper provides a case study of water quality assessment in the context of urban river restoration, and it illustrates the utility of combining monitoring and data analysis with modeling.     

Evaluation of exposure reduction to indoor air pollution in stove intervention projects in Peru by urinary biomonitoring of polycyclic aromatic hydrocarbon metabolites

Burning biomass fuels such as wood on indoor open-pit stoves is common in developing regions. In such settings, exposure to harmful combustion products such as fine particulate matter (PM(2.5)), carbon monoxide (CO) and polycyclic aromatic hydrocarbons (PAHs) is of concern. We aimed to investigate if the replacement of open pit stoves by improved stoves equipped with a chimney would significantly reduce exposure to PAHs, PM(2.5) and CO. Two stove projects were evaluated in Peru. Program A was part of the Juntos National Program in which households built their own stoves using materials provided. In Program B, Barrick Gold Corporation hired a company to produce and install the stoves locally. A total of 30 and 27 homes participated in Program A and B, respectively. We collected personal and kitchen air samples, as well as morning urine samples from women tasked with cooking in the households before and after the installation of the improved stoves. Median levels of PM(2.5) and CO were significantly reduced in kitchen and personal air samples by 47-74% after the installation of the new stoves, while the median reduction of 10 urinary hydroxylate PAH metabolites (OH-PAHs) was 19%-52%. The observed OH-PAH concentration in this study was comparable or higher than the 95th percentile of the general U.S. population, even after the stove intervention, indicating a high overall exposure in this population.     

2,4,6-Trinitrotoluene mineralization and bacterial production rates of natural microbial assemblages from coastal sediments

The nitrogenous energetic constituent, 2,4,6-Trinitrotoluene (TNT), is widely reported to be resistant to bacterial mineralization (conversion to CO₂); however, these studies primarily involve bacterial isolates from freshwater where bacterial production is typically limited by phosphorus. This study involved six surveys of coastal waters adjacent to three biome types: temperate broadleaf, northern coniferous, and tropical. Capacity to catabolize and mineralize TNT ring carbon to CO₂ was a common feature of natural sediment assemblages from these coastal environments (ranging to 270+/−38 μg C kg⁻¹ d⁻¹). More importantly, these mineralization rates comprised a significant proportion of total heterotrophic production. The finding that most natural assemblages surveyed from these ecosystems can mineralize TNT ring carbon to CO₂ is consistent with recent reports that assemblage components can incorporate TNT ring carbon into bacterial biomass. These data counter the widely held contention that TNT is recalcitrant to bacterial catabolism of the ring carbon in natural environments.     

The use of commercial and industrial waste in energy recovery systems - A UK preliminary study

With 2020 energy targets set out by the EU fast approaching, the UK is trying to source a higher proportion of its energy from renewable resources. Coupled with this, a growing population and increasing trends in consumer demand have resulted in national waste loads increasing. A possible solution to both issues is energy-from-waste (EfW) technologies. Many studies have focused on municipal solid waste (MSW) as a potential feedstock, but appear to overlook the potential benefits of commercial and industrial waste (C&IW). In this study, samples of C&IW were collected from three North West waste management companies and Lancaster University campus. The samples were tested for their gross and net calorific value, moisture content, ash content, volatile matter, and also elemental composition to determine their suitability in EfW systems. Intra-sample analysis showed there to be little variation between samples with the exception two samples, from waste management site 3, which showed extensive variation with regards to net calorific value, ash content, and elemental analysis. Comparisons with known fuel types revealed similarities between the sampled C&IW, MSW, and refuse derived fuel (RDF) thereby justifying its potential for use in EfW systems. Mean net calorific value (NCV) was calculated as 9.47 MJ/kg and concentrations of sulphur, nitrogen, and chlorine were found to be below 2%. Potential electrical output was calculated using the NCV of the sampled C&IW coupled with four differing energy generation technologies. Using a conventional incinerator with steam cycle, total electrical output was calculated as 24.9 GWh, based on a plant operating at 100,000 tpa. This value rose to 27.0 GWh when using an integrated gasification combined cycle. A final aspect of this study was to deduce the potential total national electrical output if all suitable C&IW were to be used in EfW systems. Using incineration coupled with a steam turbine, this was determined to be 6 TWh, 1.9% of the national demand thereby contributing 6.5% towards the UK’s 2020 renewable electricity target.