Reproductive effects of tris(4-chlorophenyl)methanol in the rat.

Tris(4-chlorophenyl)methanol (TCPM) is a global contaminant of unknown origin that is structurally related to the endocrine modulating pesticides 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) and Dicofol. Therefore, the potential reproductive toxic effects of TCPM were investigated in sexually mature male Sprague Dawley rats (n = 20) treated with 1.0, 10.0 or 100 ppm of TCPM mixed in the diet for 28 days. The calculated TCPM intake was 0.0, 0.1, 1.2 and 12.4 mg/kg/day, respectively. Serum concentrations of follicle stimulating hormone (FSH) in terminal blood samples were significantly (P < 0.02) elevated in the highest dose group compared to the controls. In contrast, dietary exposure to TCPM had no effect on circulating levels of luteinizing hormone (LH), testosterone (T) and the T/LH ratio. Incubation of MCF-7 cells with increasing concentrations of TCPM failed to either induce proliferation or to block the proliferative effect induced by estradiol indicating that TCPM is neither estrogenic or anti-estrogenic. Relative binding affinity studies using androgen receptors from the prostate revealed that TCPM has a binding affinity comparable to 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p,p'-DDE), the principle metabolite of DDT. In addition, the calculated Ki (0.62 microM) for TCPM is lower than the reported Ki's for the antiandrogenic pesticides p,p'-DDE and vinclozolin. Although TCPM binds with the androgen receptor in vitro, the absence of both an effect on serum T levels and morphological changes in the testis suggests that the mechanism of action for elevated FSH levels seen in vivo may not involve an antiandrogenic effect of TCPM at the dose level used in this study. The no adverse effect level for reproductive effects of TCPM is 10 ppm which is equivalent to a calculated intake of 1.2 mg/kg/day.     

Synthesis, characterization and chromatographic separation of tetrachlorobenzene-related compounds

Sulphoxide, sulphone and mercapturic acid derivatives of isomeric tetrachlorobenzene were synthesized. These compounds and isomers of tetrachlorophenol were characterized by spectroscopic and chromatographic methods.     

Accumulation and tissue distribution of selected polychlorinated biphenyl congeners in chickens

During one to three consecutive periods of 2 weeks, broiler chickens (n = 108) received test dies to which different amount of PCBs (7 congeners) were added. The relationship between exposure time and accumulation of individual congeners in different chicken tissues, such as breast, thigh and abdominal fat tissue, was observed. In all tissues, the vast majority of the PCB accumulation occurred during the first 2 weeks of exposures. After that, PCB concentrations only increased in the abdominal fat tissue of the animals. The individual PCBs were distributed differently in the various tissues. While CBs 28, 118, 138, 153 and 180 accumulated in the chickens, CBs 52 and 101 were metabolized, but no methyl sulphone metabolites of these congeners could be detected. Our results provide information on the absorption, tissue distribution and biotransformation of the individual PCB congeners and confirm the structure-activity relationships for metabolism of PCBs in birds, which are different from those in fish or mammalian species.     

Anaerobic digestion of polyelectrolyte flocculated waste activated sludge

This work examined how adding one of three polyelectrolyte flocculants (T3052: cationic, T2000: non-ionic, and T1052: anionic) affected the anaerobic digestion of wastewater sludge. Methane production, floc characteristics (morphology and zeta-potential) and process parameters (soluble chemical oxygen demands (SCODs) and reductive potentials) were monitored along the digestion tests. The digestion rates of T2000- and T1052-conditioned sludge resembled that for original sludge. The T3052-flocculated sludge generated methane at a higher rate during the first 6 days of digestion than did the original one. In the following stage, the digestion rate of sludge flocculated with T3052 at dosage exceeding 15 g/kg dried solids declined. For example, at 40 days of digestion the methane production amounts for original, 15 g/kg DS flocculated, and 40 g/kg flocculated sludge were of 136, 105, and 85 g/kg DS, respectively. The role of flocculants could change in different stages of digestion.The dosed polymers had no apparent toxicity to the inoculum used. The changes in SCOD, adenosintriphosphate concentrations, oxidative and reductive potential, and zeta-potentials did not correlate with the noted hindered digestion for T3052-conditioned sludge. Microphotographic observation revealed that the flocs of T3052-conditioned sludge were not only of a large size, but also were resistant to structural deterioration during digestion. Therefore, mass transfer resistance was proposed to account for the hindered digestion efficiency observed for T3052-conditioned sludge.     

An unconventional approach to studying the reaction kinetics of the Fenton's oxidation of 2,4-dichlorophenoxyacetic acid

The Fenton's oxidation kinetics of herbicide 2,4-D at various [Fe(II)] and [H(2)O(2)] combinations was investigated and modelled through an unconventional approach. The reaction kinetics of 2,4-D degradation demonstrated a two-stage pattern of decay, where a very fast reactive stage was followed by a retardation stage due to the depletion of oxidants and to the competitive side-reactions of the intermediates (including 2,4-dichlorophenol, chlorohydroquinone and 2,6-dichlororesorcinol). A model characterized by two newly established constants, the initial decay rate and the maximum oxidative capacity, was proposed and proven capable of describing the two-stage process, which cannot easily be described by conventional first- or second-order kinetics approaches.     

污染区大气中多氯联苯的表征与分布研究初探

通过采集并分析污染区大气及大气颗粒物中PCBs的含量,揭示了污染区空气中PCBs的残留量,讨论了各样品中PCBs的组成及分布,气相样品中可检出的PCBs总浓度在19 1-641ng·m-3,颗粒物中可检出的PCBs同类物总浓度为0.191-0.373μg·g -1. 并对气相与颗粒物PCBs浓度的关系进行了初步探讨.对同类物分布的研究表明,无论气态还是大气颗粒物中低氯代的PCBs同类物都是其主要成份.     

A teratological assessment of four trihalomethanes in the rat

Abstract

Four trihalomethanes were administered by gavage to Sprague‐Dawley rats from day 6 to day 15 of gestation. Chloroform (Ch) was administered at levels of 100, 200 and 400 mg/kg and bromoform (Br), bromodichloromethane (BDCM) and chlorodibromomethane (CDBM) were administered at levels of 50, 100 or 200 mg/kg/day. A separate control was used for each compound. Maternal weight gain was depressed in all groups receiving Ch and at the highest dose levels of BDCM and CDBM. Ch administration caused decreased maternal hemoglobin and hematocrit values at all dose levels and also produced increased serum inorganic phosphorus and cholesterol at the highest dose. Liver enlagement was observed at all dose levels of Ch but in no other treatment groups. Evidence of a fetotoxic response was observed with Ch, CDBM and Br but not BDCM. No dose‐related histopathological changes were observed in either mothers or fetuses as a result of treatment. None of the chemicals tested produced any teratogenic effects.     

An economic evaluation and assessment of environmental impact of the municipal solid waste management system for Taichung City in Taiwan

Municipal solid waste management (MSWM) is an important environmental challenge and subject in urban planning. For sustainable MSWM strategies, the critical management factors to be considered include not only economic efficiency of MSW treatment but also life-cycle assessment of the environmental impact. This paper employed linear programming technique to establish optimal MSWM strategies considering economic efficiency and the air pollutant emissions during the life cycle of a MSWM system, and investigated the correlations between the economical optimization and pollutant emissions. A case study based on real-world MSW operating parameters in Taichung City is also presented. The results showed that the costs, benefits, streams of MSW, and throughputs of incinerators and landfills will be affected if pollution emission reductions are implemented in the MSWM strategies. In addition, the quantity of particulate matter is the best pollutant indicator for the MSWM system performance of emission reduction. In particular, this model will assist the decision maker in drawing up a friendly MSWM strategy for Taichung City in Taiwan.

Implications: Recently, life-cycle assessments of municipal solid waste management (MSWM) strategies have been given more considerations. However, what seems to be lacking is the consideration of economic factors and environmental impacts simultaneously. This work analyzed real-world data to establish optimal MSWM strategies considering economic efficiency and the air pollutant emissions during the life cycle of the MSWM system. The results indicated that the consideration of environmental impacts will affect the costs, benefits, streams of MSW, and throughputs of incinerators and landfills. This work is relevant to public discussion and may establish useful guidelines for the MSWM policies.     

微生物制剂与玄武岩纤维联斥处理城市废水

为了探索一种新型的去除水体中有机物的工艺,以模拟城市废水为研究对象,研究不同工况条件下,复合微生物制剂、组合双环玄武岩纤维填料以及复合微生物制剂与组合双环玄武岩纤维填料结合对模拟城市废水中COD的去除情况。实验结果表明,复合微生物制剂与组合双环玄武岩纤维填料结合在曝气的情况下对COD的去除能力较高。在复合微生物制剂与组合双环玄武岩纤维填料结合的条件下,对COD浓度为500mg／L左右的模拟城市废水的去除效率可达97．22％;影响模拟城市废水中COD去除效果的各因素的主次顺序依次为反应时间〉曝气时间〉投加量=pH;得出最佳工况参数是：复合微生物制剂的投加量为0．05g／L,曝气时间为72h,反应时间为96h,pH为7。     

Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions

In this study, we present a general protocol for the making of surface-imprinted core-shell magnetic beads via reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized iron oxide nanoparticles as the chain transfer agent. The resulting composites were characterized by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface-imprinted magnetic beads were demonstrated with a homogeneous polymer films (thickness of about 22 nm), spherical shape, and exhibited magnetic property (Ms = 0.41 mA m² g⁻¹) and thermal stability. Rebinding experiments were carried out to determine the specific binding capacity and selective recognition. The as-synthesized surface-imprinted core-shell magnetic beads showed outstanding affinity and selectivity towards bisphenol A over structurally related compounds, and easily reach the magnetic separation under an external magnetic field. In addition, the resulting composites reusability without obviously deterioration in performance was demonstrated at least five repeated cycles.