Thermodynamic behavior of rare metals in the melting process of municipal solid waste (MSW) incineration residues

This study aims to identify the thermodynamic behavior of rare metal elements during the melting process of municipal solid waste incineration residues. The fate of several selected rare metal elements was investigated using two approaches: experimental and thermodynamic equilibrium calculation at two actual melting plants. The results revealed that Ag, Bi, Ga, Ge, In, Pd, Sb, Te, and Tl are readily volatilized as chloride and/or gaseous forms and then condensed in melting furnace fly ash. On the other hand, Cr, Ni, Ta, V, and Zr tend to mostly remain in molten slag. Sn is volatilized as SnS (g) under reducing conditions while volatilization is suppressed under oxidizing conditions. Thermodynamically, total volatilization of Mn as MnCl2 (g) occurred with highly available chlorine under oxidizing conditions. However, at the actual plants, only a small proportion was volatilized. As for Co, Mo, and W, no volatilization occurred at the actual plants although the calculations suggest that these elements can form volatile metal chloride and volatilize. Non-equilibrium and heterogeneity of the actual plant melting furnace could explain the discrepancy. This study provided a good qualitative view of the behavior of rare metals in the melting process, but further investigation is required to produce a more accurate simulation and to resolve the discrepancy.     

The environmental impact of industrialization in East Asia and strategies toward sustainable development

The East Asian economy has been growing fast in recent years, and environmental stresses are building up rapidly. Transboundary air pollution, water shortages, drinking water contamination, freshwater and marine pollution, deforestation, climatic disasters, and other environmental problems are becoming serious threats to the well-being of people in this densely populated region. The ESI (environmental sustainability index) reported by the World Economic Forum in 2005 is a good indicator of the environmental status of the region; most East Asian countries ranked at the bottom. East Asia is not moving toward a sustainable society, and the environment will not sustain the current rate of economic development for long. The traditional culture of East Asia used to be sustainable, so we can learn much from our traditions. Land use should be planned from an ecological point of view so as to best preserve the land’s productivity and stability. There should be definite goals as to where and how much to preserve the three important ecological bases: forests, coastal wetlands and agricultural farms. The forest is the base for the terrestrial ecosystem, including flood control, water resources, and climate; the coastal wetland is the base for the marine ecosystem; farmland is the base for producing food. Within these defined goals, limits should be set on how much land can be utilized for activities like urban development, manufacturing, and recreation. Limits on the pollution load resulting from such activities should be set so as not to irreversibly damage the environment. Economic development should be planned to allow the use of energy and resources only after satisfying these constraints.

Assessing the Removal Efficiency of Murine Norovirus 1, Hepatitis A Virus,and Human Coronavirus 229E on Dish Surfaces Through General Wash Program of Household Dishwasher

Food and Environmental Virology - The performance of dishwashers in removing live viruses is an important informative value in practical applications. Since foodborne viruses are present in...     

The effect of emergent macrophytes on the dynamics of sulfur species and trace metals in wetland sediments

This study focuses on the effect of plants on the biogeochemistry of sulfur species and the mobility of heavy metals in wetland sediments. Results showed that, in the presence of plants, sediments had elevated sulfate concentrations in the rhizosphere during the growing season, ranging from 0.2 to 6.20 mmol L(-1), whereas only a small difference in the sulfate profiles between vegetated and non-vegetated sediments was observed during senescence. Based on the sulfate concentration increase, the oxygen release rate from the roots to achieve the corresponding oxidation of sulfide was estimated as 0.85 g m(-2) day(-1). Evapotranspiration-induced advection is a major contributor to the transport of sulfate from the water column into the sediments, and also allows dissolved trace metals (i.e. Cd, Pb, and Zn) to be transported into the sediments and react with the acid volatile sulfide pool, resulting in the immobilization of trace metals in these sediments.     

Nitrogen isotope ratios in pine bark as an indicator of N emissions from anthropogenic sources

The article describes the use of Scots pine bark to identifynitrogen sources in eastern Germany, as well as background areas in Russia and Bulgaria, by using natural isotope ratios of total nitrogen (N_t) and individual N compoundssuch as ammonium (NH₄ ⁺), nitrate (NO₃ ^-)and amid nitrogen (amide-N). The samples collected were analysed using an elemental analyser in connection with a gas isotope mass spectrometer (EA-IRMS). Natural ¹⁵N abundances in pine bark from impact areas suggest that the ammonium accumulated on the surface of the bark is releasedfrom livestock management. Bark of Scots pines growing near agricultural land had highly depleted ¹⁵N_t values (between –8 and –12), while bark from background areas (unpolluted areas) displayed slightly negative ¹⁵N_t values (mean ¹⁵N_t = –3.8). It is assumed that part of the N adsorbed on the bark surface is mainly derived from ammonia(mean ¹⁵N_t = –40.3) escaping from livestock housing and during the application of manure. This assumption is confirmed by experiments under controlled conditions in which manure samples were spread on soil. In addition, temporal and spatial variations of ¹⁵N_t abundances in pine bark from various locations in eastern Germany as wellas pine stands in Nature Park Dübener Heath are discussed.     

Combustion Characteristics of Spent Catalyst and Paper Sludge in an Internally Circulating Fluidized-Bed Combustor

Abstract

Combustion of spent vacuum residue hydrodesulfurization catalyst and incineration of paper sludge were carried out in thermo-gravimetric analyzer and an internally circulating fluidized-bed (ICFB) reactor. From the thermogravimetric analyzer-differential thermo-gravimetric curves, the pre-exponential factors and activation energies are determined at the divided temperature regions, and the thermo-gravimetric analysis patterns can be predicted by the kinetic equations. The effects of bed temperature, gas velocity in the draft tube and annulus, solid circulation rate, and waste feed rate on combustion efficiency of the wastes have been determined in an ICFB from the experiments and the model studies. The ICFB combustor exhibits uniform temperature distribution along the bed height with high combustion efficiency (>90%). The combustion efficiency increases with increasing reaction temperature, gas velocity in the annulus region, and solid circulation rate and decreases with increasing waste feed rate and gas velocity in the draft tube. The simulated data from the kinetic equation and the hydrodynamic models predict the experimental data reasonably well.     

Combustion characteristics of spent catalyst and paper sludge in an internally circulating fluidized-bed combustor

Combustion of spent vacuum residue hydrodesulfurization catalyst and incineration of paper sludge were carried out in thermo-gravimetric analyzer and an internally circulating fluidized-bed (ICFB) reactor. From the thermo-gravimetric analyzer-differential thermo-gravimetric curves, the pre-exponential factors and activation energies are determined at the divided temperature regions, and the thermo-gravimetric analysis patterns can be predicted by the kinetic equations. The effects of bed temperature, gas velocity in the draft tube and annulus, solid circulation rate, and waste feed rate on combustion efficiency of the wastes have been determined in an ICFB from the experiments and the model studies. The ICFB combustor exhibits uniform temperature distribution along the bed height with high combustion efficiency (>90%). The combustion efficiency increases with increasing reaction temperature, gas velocity in the annulus region, and solid circulation rate and decreases with increasing waste feed rate and gas velocity in the draft tube. The simulated data from the kinetic equation and the hydrodynamic models predict the experimental data reasonably well.     

Mercury flows in a zinc smelting facility in South Korea

To prepare for the international mercury convention, the characteristics of mercury emissions from a zinc smelting facility in South Korea have been reviewed and a material flow analysis (MFA) has been conducted in this research. As inputs into the mercury MFA study, zinc ores and sulfuric acid were examined, whereas wastewater sludge, effluence water, spent catalyst, and emissions from the casting and roasting processes were examined as outputs. Mercury concentrations extracted from end products like zinc ingots, cadmium ingots, and sulfuric acid were then analyzed. Our results showed that the wastewater sludge discharged from the zinc smelting process had a relatively higher concentration of mercury, indicating that the concentration of mercury was further enriched in the wastewater sludge. The wastes discharged through the zinc smelting process should be thoroughly controlled, as results of the MFA showed that approximately 89 % of the mercury contained in the original input was later found in the waste. According to this study, the higher the concentration of mercury within zinc ores at the input stage, the higher is the mercury concentration found in the wastewater sludge at the output stage.     

Lipopeptide als natürliche Adjuvantien für Impfstoffe aus Gram-negativen Bakterien

Bacterial cell wall components such as lipopolysaccharide, a variety of membrane proteins, murein, and lipoprotein can act as immunoadjuvants for bacterial vaccines, thus enhancing protection from bacterial infections. Synthetically prepared N-terminal parts of the lipoprotein from Enterobacteria carrying three fatty acid residues or lipopeptide analogs containing one to four aminoacids bound to S-glycerylcysteine act as potent immunoadjuvants in vivo in combination with or covalently linked to antiges. Here we demonstrate that the supplementation ofSalmonella vaccines with these synthetic lipopeptides significantly enhances their vaccine efficiency in mice. Variations in the native lipopeptide structure regarding chain length and amino acid sequence of the peptide moiety, as well as modifications of the lipoamino acid, lead to reduction or even complete loss of the adjuvant activity. The immunoadjuvant properties of the lipopeptides as described here are mediated by an enhancement of the humoral immune response.