The ozone formation potential of 1-bromo-propane

1-Bromo-propane (1-BP) is a replacement for high-end chlorofluorocarbon (HCFC) solvents. Its reaction rate constant with the OH radical is, on a weight basis, significantly less than that of ethane. However, the overall smog formation chemistry of 1-BP appears to be very unusual compared with typical volatile organic compounds (VOCs) and relatively complex because of the presence of bromine. In smog chamber experiments, 1-BP initially shows a faster ozone build-up than what would be expected from ethane, but the secondary products containing bromine tend to destroy ozone such that 1-BP can have a net overall negative reactivity. Alternative sets of reactions are offered to explain this unusual behavior. Follow-up studies are suggested to resolve the chemistry. Using one set of bromine-related reactions in a photochemical grid model shows that 1-BP would be less reactive toward peak ozone formation than ethane with a trend toward even lower ozone impacts in the future.     

Intercomparison of Satellite Remote Sensing‐Based Flood Inundation Mapping Techniques

The objective of this study was to determine the accuracy of five different digital image processing techniques to map flood inundation extent with Landsat 8–Operational Land Imager satellite imagery. The May 2016 flooding event in the Hempstead region of the Brazos River, Texas is used as a case study for this first comprehensive comparison of classification techniques of its kind. Five flood water classification techniques (i.e., supervised classification, unsupervised classification, delta‐cue change detection, Normalized Difference Water Index [NDWI], modified NDWI [MNDWI]) were implemented to characterize flooded regions. To identify flood water obscured by cloud cover, a digital elevation model (DEM)–based approach was employed. Classified floods were compared using an Advanced Fitness Index to a “reference flood map” created based on manual digitization, as well as other data sources, using the same satellite image. Supervised classification yielded the highest accuracy of 86.4%, while unsupervised, MNDWI, and NDWI closely followed at 79.6%, 77.3%, and 77.1%, respectively. Delta‐cue change detection yielded the lowest accuracy with 70.1%. Thus, supervised classification is recommended for flood water classification and inundation map generation under these settings. The DEM‐based approach used to identify cloud‐obscured flood water pixels was found reliable and easy to apply. It is therefore recommended for regions with relatively flat topography.     

The relationship between demographic/educational parameters and perceptions,knowledge and earthquake mitigation in Israel

Perceptions, knowledge and mitigation are factors that might play a role in preventing injury and loss of life during a major earthquake.² Little is known about the relationships between different demographic and educational parameters and these factors. A national representative sample of 495 adults was investigated in order to determine the relationship between demographic and educational parameters in terms of the perceived threat, perceived coping, knowledge and mitigation of earthquakes in Israel. Compared to females, males perceived the threat of earthquakes to be lower (t=3.183, p=0.002), manifested higher levels of perceived coping (t=2.55, p=0.011), and had higher levels of earthquake related knowledge (t=2.047, p=0.041). We conclude that there are gender differences in perceptions and knowledge regarding earthquakes.     

Size-resolved mass and chemical properties of dust aerosols from Australia’s Lake Eyre Basin

Australia is the dominant mineral dust source in the southern hemisphere, yet the physical, chemical and optical properties of Australian dust aerosol are presently poorly understood. We have investigated the properties of Australian aerosol at a site near Lake Eyre in central Australia, which is strongly influenced by mineral dust. During a field campaign in November 2007 we collected eight sets of size-resolved aerosol samples for laboratory analysis: six during quiescent conditions, and two during dust storms. Ion Beam Analysis was used to determine the elemental composition of all filter samples. Scatter plots showed that Fe, Al and Ti were well correlated with Si, and hence soil-derived. The Fe/Si ratio was consistently higher than the global crustal average, confirming that Australian dusts are comparatively rich in Fe. Scatter plots for Na and Cl against Si showed clear evidence of a second aerosol population, associated with maritime advection. Profiles of water soluble ions for two sample sets, showed the importance of marine influences on both the fine and coarse modes, as well as the presence of organic acids. Estimates of the mass fraction of NaCl in our samples suggest that, for quiescent days, roughly 0.5% of the sample mass was NaCl.     

Reproduction and distribution of the invasive European fanworm Sabella spallanzanii (Polychaeta: Sabellidae) in Port Phillip Bay, Victoria, Australia

 The European fanworm Sabella spallanzanii (Gmelin, 1791) was recently introduced to Port Phillip Bay and is now a conspicuous component of most benthic communities. Reproduction of the worm was investigated in a population at Queenscliff over a 2 yr period (October 1995 to October 1997) using gonadal histology. The worms are dioecious (sex ratio 1:1, n=250), and attained sexual maturity at ∼50 mm body length. Reproductive periodicity followed a distinct annual cycle, and spawning proceeded through an extended autumn/winter period. Spawning was broadly synchronous between sexes, and coincided with falling seawater temperatures and shorter day-lengths. The females were highly fecund, and >50 000 eggs were probably shed from large females (>300 mm body length) during the annual spawning period. Breeding cycles of S. spallanzanii in Port Phillip Bay are ∼6 mo out of phase with endemic populations located at similar latitudes in the northern hemisphere. The spread of S. spallanzanii within Port Phillip Bay has been monitored by divers on an annual basis since 1994. The most recent dive survey (1998) indicates that S. spallanzanii has extended its range through out the entire 2000 km² embayment, and has invaded most subtidal habitats. Quantitative estimates of S. spallanzanii abundances were highest on pier pylons (12.5 individuals m⁻², 0.5 to 7 m depths). On sediments, estimates were highest at shallow sites (0.3 m⁻², 7 m depth), but numbers declined significantly with depth (0.1 m⁻², 17 to 22 m depth). Mean worm lengths and biomass were, by contrast, significantly higher at intermediate depths (12 to 17 m) than in shallower (7 m) or deeper (22 m) locations. S. spallanzanii demonstrates a clear preference for growth in sheltered, nutrient-enriched waters, so it may not spread from Port Phillip Bay into the adjacent oceanic waters of Bass Strait; however, in view of S. spallanzanii's current high abundance, fecundity and extended spawning periodicity, there is a high risk of future range expansions, mediated by shipping, into other temperate-water ports. Received: 17 November 1998 / Accepted: 6 January 2000     

Characterisation and source apportionment of fine particulate sources at Hanoi from 2001 to 2008

PM_2.5 particulate matter has been collected on Teflon filters every Sunday and Wednesday at Hanoi, Vietnam for nearly eight years from April 2001 to December 2008. These filters have been analysed for over 21 different chemical species from hydrogen to lead by ion beam analysis techniques. This is the first long term PM_2.5 dataset for this region. The average PM_2.5 mass for the study period was (54 ± 33) μg m^?3, well above the current US EPA health goal of 15 μg m^?3. The average PM_2.5 composition was found to be (29 ± 8)% ammonium sulfate, (8.9 ± 3.3)% soil, (28 ± 11)% organic matter, (0.6 ± 1.4)% salt and (9.2 ± 2.8)% black carbon. The remaining missing mass (25%) was mainly nitrates and absorbed water. Positive matrix factorisation techniques identified the major source contributions to the fine mass as automobiles and transport (40 ± 10)%, windblown soil (3.4 ± 2)%, secondary sulfates (7.8 ± 10)%, smoke from biomass burning (13 ± 6)%, ferrous and cement industries (19 ± 8)%, and coal combustion (17 ± 7)% during the 8 year study period.