Evaluation of a Slag and Portland Cement Mix to Simulate Treatment of Acidic Waste via Solidification/Stabilization in a Deep Soil Mix Application

Site investigations at an oil and gas facility identified a highly acidic waste referred to as residual acid tar that resulted in the transport of dissolved nickel toward the point of compliance at concentrations that exceeded site environmental screening levels. Solidification/stabilization (S/S) via deep soil mixing was selected as the remedial approach and a mixture of ground granulated blast furnace slag cement and Portland cement was subjected to treatability testing to evaluate the reagent mix's ability to achieve treatment objectives. Results from the treatability test showed a cement mix dose of 21 percent was sufficient to raise the pH above the target of 6.0 and reduce dissolved nickel concentrations to below site screening levels in leachate from treated samples of residual acid tar and material impacted by residual acid tar. Cement mix doses of 21 percent or greater were sufficient to achieve target strengths in the unimpacted shallow overburden. However, none of the doses tested were able to achieve target strengths in the residual acid tar or peaty material impacted by the residual acid tar. Results showed soil strengths increased significantly when the pH in leachate from the treated samples approached 12, suggesting the presence of organic acids related to the peaty soils may interfere with the cement set. Recommendations from the study include additional treatability testing to evaluate pre‐treatment with hydrated lime to satisfy acid neutralization requirements prior to dosing with the cement mix. ©2016 Wiley Periodicals, Inc.     

Relative proportions of polycyclic aromatic hydrocarbons differ between accumulation bioassays and chemical methods to predict bioavailability

Chemical methods to predict the bioavailable fraction of organic contaminants are usually validated in the literature by comparison with established bioassays. A soil spiked with polycyclic aromatic hydrocarbons (PAHs) was aged over six months and subjected to butanol, cyclodextrin and tenax extractions as well as an exhaustive extraction to determine total PAH concentrations at several time points. Earthworm (Eisenia fetida) and rye grass root (Lolium multiflorum) accumulation bioassays were conducted in parallel. Butanol extractions gave the best relationship with earthworm accumulation (r² ≤ 0.54, p ≤ 0.01); cyclodextrin, butanol and acetone-hexane extractions all gave good predictions of accumulation in rye grass roots (r² ≤ 0.86, p ≤ 0.01). However, the profile of the PAHs extracted by the different chemical methods was significantly different (p < 0.01) to that accumulated in the organisms. Biota accumulated a higher proportion of the heavier 4-ringed PAHs. It is concluded that bioaccumulation is a complex process that cannot be predicted by measuring the bioavailable fraction alone.     

Global reforestation and biodiversity conservation

The loss of forest is a leading cause of species extinction, and reforestation is 1 of 2 established interventions for reversing this loss. However, the role of reforestation for biodiversity conservation remains debated, and lacking is an assessment of the potential contribution that reforestation could make to biodiversity conservation globally. We conducted a spatial analysis of overlap between 1,550 forest-obligate threatened species’ ranges and land that could be reforested after accounting for socioeconomic and ecological constraints. Reforestation on at least 43% (∼369 million ha) of reforestable area was predicted to potentially benefit threatened vertebrates. This is approximately 15% of the total area where threatened vertebrates occur. The greatest opportunities for conserving threatened vertebrate species are in the tropics, particularly Brazil and Indonesia. Although reforestation is not a substitute for forest conservation, and most of the area containing threatened vertebrates remains forested, our results highlight the need for global conservation strategies to recognize the potentially significant contribution that reforestation could make to biodiversity conservation. If implemented, reforestation of ∼369 million ha would also contribute substantially to climate-change mitigation, offering a way to achieve multiple sustainability commitments at once. Countries must now work to overcome key barriers (e.g., unclear revenue streams, high transaction costs) to investment in reforestation.     

Infrared analysis for counterfeit electronic parts detection and supply chain validation

Within the electronics industry, counterfeit electronic components entering the supply chain have steadily become an increasing threat accounting for more than 8 % of global merchandise trade and an annual $600 billion enterprise. Currently, there are not many cost-effective and nonintrusive solutions for counterfeit detection of electronic parts. In this paper, the authors present a statistical approach for detecting counterfeit components based on infrared (IR) analysis by the use of independent component analysis (ICA). As a prominent higher-order statistical analysis technique, ICA is capable of extracting relevant features from IR data. The latest applications and the extended algorithms of ICA have been elucidated for the purposes of classification and identification of counterfeit electronic parts. The theoretical framework of ICA is presented along with extensive experimental results to illustrate its feature extraction function in counterfeit electronic parts detection.     

Determinants of coverage in Community‐based Therapeutic Care programmes: towards a joint quantitative and qualitative analysis

One of the most important elements behind the success of Community‐based Therapeutic Care (CTC) programmes for the treatment of severe acute malnutrition has been their ability to achieve high levels of coverage. In CTC, coverage is measured using the Centric System Area Sampling (CSAS) method, which provides accurate and reliable estimates of programme coverage as well as information on the primary reasons for non‐attendance. Another important feature of CTC programmes is their use of socio‐cultural assessments to determine potential barriers to access and to develop context‐specific responses. By analysing data on non‐attendance provided by CSAS surveys, in conjunction with data from socio‐cultural assessments, it is possible to identify common factors responsible for failures in programme coverage. This paper focuses on an analysis of data from 12 CTC programmes across five African countries. It pinpoints three common factors (distance to sites, community awareness of the programme, and the way in which rejections are handled at the sites) that, together, account for approximately 75 per cent of non‐attendance.     

A rapid evidence assessment of the potential risk to the environment presented by active ingredients in the UK’s most commonly sold companion animal parasiticides

A number of parasiticides are commercially available as companion animal treatments to protect against parasite infestation and are sold in large volumes. These treatments are not intended to enter the wider environment but may be washed off or excreted by treated animals and have ecotoxic impacts. A systematic literature review was conducted to identify the existing evidence for the toxicity of the six most used parasiticides in the UK: imidacloprid, fipronil, fluralaner, afoxolaner, selamectin, and flumethrin. A total of 17,207 published articles were screened, with 690 included in the final evidence synthesis. All parasiticides displayed higher toxicity towards invertebrates than vertebrates, enabling their use as companion animal treatments. Extensive evidence exists of ecotoxicity for imidacloprid and fipronil, but this focuses on exposure via agricultural use and is not representative of environmental exposure that results from use in companion animal treatments, especially in urban greenspace. Little to no evidence exists for the ecotoxicity of the remaining parasiticides. Despite heavy usage, there is currently insufficient evidence to understand the environmental risk posed by these veterinary treatments and further studies are urgently needed to quantify the levels and characterise the routes of environmental exposure, as well as identifying any resulting environmental harm.

     

Engaging with the Ecological Footprint as a Decision-Making Tool: Process and Responses

Since the initial development of the Ecological Footprint in the early 1990s, the concept has gained increased interest amongst academics and practitioners internationally. In the UK, it is estimated that some 60 to 70 Ecological Footprint studies were undertaken between 1999 and 2004. Although the majority of interest in Ecological Footprinting has come from local government, a recent study has found that government officers involved in the formulation of council policy have not been able to engage with the Ecological Footprint as a process or use the results to inform policy decisions. This paper analyses how an Ecological Footprint has been developed for Cardiff, the capital city of Wales. The approach used to construct an Ecological Footprint for Cardiff has been significantly different to that which had been used previously in the UK, as it has involved a unique consortium of researchers at Cardiff University and policy development officers at Cardiff Council checking the quality of data used in the Footprint calculation, and developing a range of policy scenarios.     

Escape from competition: neighbors reduce Centaurea stoebe performance at home but not away

The greater abundance of some exotic plants in their nonnative ranges might be explained in part by biogeographic differences in the strength of competition, but these competitive effects have not been experimentally examined in the field. We compared the effects of neighbors on the growth and reproduction of spotted knapweed (Centaurea stoebe) in Europe, where it is native, and in Montana, where it is invasive. There were strong negative competitive effects of neighboring vegetation on C. stoebe growth and reproduction in Europe. In contrast, identical experiments in Montana resulted in insignificant impacts on C. stoebe. Although the mechanisms that produce this dramatic biogeographic difference in competitive outcome remain unknown, our results indicate that differences in net competitive interactions between ranges may contribute to the striking dominance of C. stoebe in parts of North America.     

Applications of time-resolved laser fluorescence spectroscopy to the environmental biogeochemistry of actinides

Time-resolved laser fluorescence spectroscopy (TRLFS) is a useful means of identifying certain actinide species resulting from various biogeochemical processes. In general, TRLFS differentiates chemical species of a fluorescent metal ion through analysis of different excitation and emission spectra and decay lifetimes. Although this spectroscopic technique has largely been applied to the analysis of actinide and lanthanide ions having fluorescence decay lifetimes on the order of microseconds, such as UO , Cm, and Eu, continuing development of ultra-fast and cryogenic TRLFS systems offers the possibility to obtain speciation information on metal ions having room-temperature fluorescence decay lifetimes on the order of nanoseconds to picoseconds. The main advantage of TRLFS over other advanced spectroscopic techniques is the ability to determine in situ metal speciation at environmentally relevant micromolar to picomolar concentrations. In the context of environmental biogeochemistry, TRLFS has principally been applied to studies of (i) metal speciation in aqueous and solid phases and (ii) the coordination environment of metal ions sorbed to mineral and bacterial surfaces. In this review, the principles of TRLFS are described, and the literature reporting the application of this methodology to the speciation of actinides in systems of biogeochemical interest is assessed. Significant developments in TRLFS methodology and advanced data analysis are highlighted, and we outline how these developments have the potential to further our mechanistic understanding of actinide biogeochemistry.