Growth, carbon, nitrogen and caloric content of Solea senegalensis (Pisces: Soleidae) from egg fertilization to metamorphosis

Eggs and larvae of the Senegal sole, Solea senegalensis Kaup, were reared from fertilization until the end of metamorphosis, which occurs by Day 17 after hatching at 19.5 °C. Changes in energy content and biomass quality were studied in terms of dry weight and of carbon, nitrogen and energy content. S. senegalensis spawned eggs of about 1 mm diameter which hatched 38 h after fertilization. Average dry weight of individual eggs was 46 μg, the chorion accounting for about 18% of total dry weight. Gross energy of recently fertilized sole eggs was approximately 1 J egg⁻¹. From fertilization to hatching, eggs lost 8% of their total energy (chorion not included). After hatching, larvae lost 14% of their initial energy until the start of feeding which occurred about 48 h afterwards. The principal components catabolized during embryogenesis were carbon-rich compounds that decreased by 26%, while nitrogen-rich compounds decreased by only 10% and were practically unaltered from hatching to the start of feeding. Feeding larvae displayed constant growth during the period studied (specific growth rate on a dry weight basis was 0.26 d⁻¹). The relative proportion of carbon and nitrogen content revealed an accumulation of high energy compounds in the days before metamorphosis. By Day 14, the energy content reached values similar to those of recently hatched embryos, but decreased again during metamorphosis. Received: 10 June 1998 / Accepted: 28 January 1999     

Biodegradation of γ Irradiated Poly 3-hydroxybutyrate (PHB) Films Blended with Poly(Ethyleneglycol)

Poly(3-hydroxybutyrate) (PHB) was evaluated in blends with poly(ethyleneglycol) (PEG) of different weight average molecular weight (Mw = 300, 600, 1,000 and 6,000). Irradiation of the PHB/PEG films was carried out to different levels of irradiation doses (5 and 10 kGy) and the effects were investigated talking into consideration: thermal properties by differential scanning calorimetry (DSC), perforation resistance, water vapor transmission rate and biodegradation in simulated soil. The addition of plasticizer alters thermal stability and crystallinity of the blends. The improvement in perforation resistance due to irradiation was regarded to be a result of the crosslinking effect. Also, biodegradation assays resulted in mass retention improvements with increases in PEG molar masses, PEG concentration and irradiation dose. The irradiation process was shown to hamper the biodegradation mechanism.     

Factors influencing lead sorption-desorption at variable added metal concentrations in Rhodoxeralfs

The response of ten soils of the lithic Rhodoxeralf type to the supply of lead at concentrations of 500, 1000, 2000, 3000, 4000, 5000 and 6000 mg kg-1 was examined in batch sorption-desorption tests. Lead availability in the soils was found to depend on its partitioning between the soil solution and the solid phase as reflected in adsorption isotherms. The isotherms, of the H type, were consistent with a high affinity of the sorbent for the metal, with which it forms stable inner-sphere complexes on the soil surface. Sorption-desorption tests revealed that some properties of the soils such as their pH (mean=8) and high contents in clays (particularly in kaolinite) and crystalline iron oxides significantly influence Pb sorption, the effect being especially marked at high added metal concentrations. Added lead is largely retained by crystalline iron oxides and the soil clay fraction; the pH of the soil favours the release of variably-charged sites from both. The extent of Pb desorption was small, particularly at the lowest added levels (500 and 1000 mg kg-1). Desorption increased with increasing added Pb concentration and exceeded 50% at 5000 and 6000 mg kg-1; this suggests that Pb is present not only as inner-sphere complexes, but also as outer-sphere complexes and, partly, as precipitates. The desorption isotherms consist of three segments that exhibit significant differences depending on the added Pb concentration, namely: 500-1000, 2000-4000 and 5000-6000 mg kg-1.     

“Housing for all” at the era of financialization; can (post-disaster) cities become truly socially resilient and egalitarian?

This paper examines the realism of the resilience ambition and process of the U.S. housing system, shedding light on its heterogeneity as well as the financialization currently acting as the driving force in real estate production. The resilience ambition leading to enhanced justice and egalitarianism is understood as the provision and maintenance of post-disaster housing for all within an institutionally diverse landscape of housing policy makers and implementers. Particular emphasis is given to the post-Katrina institutional transformations resulting from multifarious interactions between multilevel institutional structures and a diverse landscape of low-income housing policy implementers – referred as social resilience cells (SRCs) in this paper. The nature and level of these transformations determine the degree to which resilience in its heterogeneous form has been incubated in New Orleans. The paper concludes with a discussion on the macro conditions and bottom-linked governance structures under which all SRCs could be better bolstered in a post-financialization, radicalised neowelfare U.S., and which in turn create possibilities for materialising the resilience ambition.     

Appropriate Preservation of Dairy Wastewater Samples for Environmental Analysis

Thousands of gallons of water are used in dairies to wash cows before milking and for cleaning equipment. The wastewater generated contains elevated levels of organic matter and pollutants, including nitrogen that once converted, may contaminate groundwater with nitrate. This study was conducted to determine the amount of sulfuric acid needed to preserve wastewater samples from a New Mexico dairy in the southwestern U.S. Titrations of wastewater from a local dairy using full strength (18 M) sulfuric acid were performed to determine the amount of acid needed to bring the pH of the sample to below two, the recommended pH for sample preservation. An average of 0.33 mL of acid was required for every 100 mL of wastewater. Due to sample variability, we recommend that 0.4 mL sulfuric acid be added for every 100 mL dairy wastewater sample to ensure adequate acidification. This quantity is twice the amount currently recommended in U.S. Environmental Protection Agency guidelines.     

Learning from the rubble: the case of Christchurch,New Zealand,after the 2010 and 2011 earthquakes

Learning after a disaster is crucial in creating more resilient places. However, many societies are repeatedly overwhelmed by disasters. This can be because of missed opportunities to learn in post‐disaster settings or because of actions implemented that seem to be highly relevant to recovery in the short term, but potentially constrain aspirations in the longer term. This paper assesses learning processes among state and non‐state actors and the ways in which these are bridged and scaled up to wider improvements in governance. Aiming to enrich understanding of post‐disaster learning, it explores different actors’ response actions after the earthquakes in Christchurch, New Zealand, in 2010 and 2011. On the one hand, ‘learning by doing’ is occurring, yet, on the other hand, systemic learning is hindered by mismatches between top‐down steering and bottom‐up initiatives. The study concludes that better linking and synergising of learning processes among different levels is vital for enhancing resilience in post‐disaster societies.     

Control of Ozone Precursors in a Complex Industrial Terrain by Using Multiscale-Nested Air Quality Models with Fine Spatial Resolution (1 km2)

Abstract

The location of the northeastern Iberian Peninsula (NEIP) in the northwestern Mediterranean basin, the presence of the Pyrenees mountain range (with altitudes >3000 m), and the influence of the Mediterranean Sea and the large valley canalization of Ebro river induce an extremely complicated structure for the dispersion of photochemical pollutants. Air pollution studies in very complex terrains such as the NEIP require high-resolution modeling for resolving the very complex dynamics of flows. To deal with the influence of larger-scale transport, however, high-resolution models have to be nested in larger models to generate appropriate initial and boundary conditions for the finer resolution domains. This article shows the results obtained through the utilization of the MM5-EMICAT2000-CMAQ multiscale-nested air quality model relating the sensitivity regimes for ozone (O₃)-nitrogen oxides (NO_x)-volatile organic compounds (VOCs) in an area of high geographical complexity, like the industrial area of Tarragona, located in the NEIP. The model was applied with fine temporal (one-hour) and spatial resolution (cells of 24 km, 2 km, and 1 km) to represent the chemistry and transport of tropospheric O₃ and other photochemical species with respect to different hypothetical scenarios of emission controls and to quantify the influence of different emission sources in the area. Results indicate that O₃ chemistry in the industrial domain of Tarragona is strongly sensitive to VOCs; the higher percentages of reduction for ground-level O₃ are achieved when reducing by 25% the emissions of industrial VOCs. On the contrary, reductions in the industrial emissions of NO_x contribute to a strong increase in hourly peak levels of O₃. At the same time, the contribution of on-road traffic and biogenic emissions to ground-level O₃ concentrations in the area is negligible with respect to the pervasive weight of industrial sources. This analysis provides an assessment of the effectiveness of different policies for the control of emission of precursors by comparing the modeled results for different scenarios.     

Use of an activated carbon from antibiotic waste for the removal of Hg(II) from aqueous solution

Porous carbon has been prepared from waste antibiotic material by a chemical activation method using K(2)CO(3) as an activating reagent. Carbon was studied systematically by the adsorption of nitrogen and iodine. It was found that the process parameters such as activation temperature and activation time are crucial for preparing high-quality activated carbon. The proper choice of the preparation conditions allows to produce microporous activated carbon with a micropore volume up to 0.492 cm(3)/g and a BET surface area of 1260 m(2)/g. Adsorption of mercury(II) from an aqueous solution on antibiotic carbon was investigated under the varying conditions of agitation time, metal ion concentration and pH. The adsorption capacity of the carbon is 129 mg/g.