A novel in vitro exposure technique for toxicity testing of selected volatile organic compounds

Exposure to vapours of volatile chemicals is a major occupational and environmental health concern. Toxicity testing of volatile organic compounds (VOCs) has always faced significant technological problems due to their high volatility and/or low solubility. The aim of this study was to develop a practical and reproducible in vitro exposure technique for toxicity testing of VOCs. Standard test atmospheres of xylene and toluene were generated in glass chambers using a static method. Human cells including: A549-lung derived cell lines, HepG2-liver derived cell lines and skin fibroblasts, were grown in porous membranes and exposed to various airborne concentrations of selected VOCs directly at the air/liquid interface for 1 h at 37 degrees C. Cytotoxicity of test chemicals was investigated using the MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) and NRU (neutral red uptake) assays following 24 h incubation. Airborne IC(50) (50% inhibitory concentration) values were determined using dose response curves for xylene (IC(50)=5350+/- 328 ppm, NRU; IC(50)=5750+/- 433 ppm, MTS in skin fibroblast) and toluene (IC(50)=0 500+/- 527 ppm, NRU; IC(50)=11,200 +/- 1,044 ppm, MTS in skin fibroblast). Our findings suggest that static direct exposure at the air/liquid interface is a practical and reproducible technique for toxicity testing of VOCs. Further, this technique can be used for inhalational and dermal toxicity studies of volatile chemicals in vitro as the exposure pattern in vivo is closely simulated by this method.     

Estimating sampling frequency in pollen exposure assessment over time

A time series model was fitted to the pollen concentration data collected in the Greater Cincinnati area for the Cincinnati Childhood Allergy and Air Pollution Study (CCAAPS). A traditional time series analysis and temporal variogram approach were applied to the regularly spaced databases (collected in 2003) and irregularly spaced ones (collected in 2002), respectively. The aim was to evaluate the effect of the sampling frequency on the sampling precision in terms of inverse of standard error of the overall level of mean value across time. The presence of high autocorrelation in the data was confirmed and indicated some degree of temporal redundancy in the pollen concentration data. Therefore, it was suggested that sampling frequency could be reduced from once a day to once every several days without a major loss of sampling precision of the overall mean over time. Considering the trade-offs between sampling frequency and the possibility of sampling bias increasing with larger sampling interval, we recommend that the sampling interval should take values from 3 to 5 days for the pollen monitoring program, if the goal is to track the long-term average.     

Biomonitoring in the Boulder River Watershed, Montana, USA: Metal Concentrations in Biofilm and Macroinvertebrates, and Relations with Macroinvertebrate Assemblage

Portions of the Boulder River watershed contain elevated concentrations of arsenic, cadmium, copper, lead, and zinc in water, sediment, and biota. We measured concentrations of As, Cd, Cu, Pb, and Zn in biofilm and macroinvertebrates, and assessed macroinvertebrate assemblage and aquatic habitat with the objective of monitoring planned remediation efforts. Concentrations of metals were generally higher in downstream sites compared with upstream or reference sites, and two sites contained metal concentrations in macroinvertebrates greater than values reported to reduce health and survival of resident trout. Macroinvertebrate assemblage was correlated with metal concentrations in biofilm and macroinvertebrates. However, macroinvertebrate metrics were significantly correlated with a greater number of biofilm metals (8) than metals in invertebrates (4). Lead concentrations in biofilm appeared to have the most significant impact on macroinvertebrate assemblage. Metal concentrations in macroinvertebrates were directly proportional to concentrations in biofilm, indicating biofilm as a potential surrogate for monitoring metal impacts in aquatic systems.     

Evaluation of give kids a boost: A school-based program to increase booster seat use among urban children in economically disadvantaged areas

Objective: This study evaluated the effectiveness of a series of 1-year multifaceted school-based programs aimed at increasing booster seat use among urban children 4–7 years of age in economically disadvantaged areas.

Methods: During 4 consecutive school years, 2011–2015, the Give Kids a Boost (GKB) program was implemented in a total of 8 schools with similar demographics in Dallas County. Observational surveys were conducted at project schools before project implementation (P₀), 1–4 weeks after the completion of project implementation (P₁), and 4–5 months later (P₂). Changes in booster seat use for the 3 time periods were compared for the 8 project and 14 comparison schools that received no intervention using a nonrandomized trial process.

The intervention included (1) train-the-trainer sessions with teachers and parents; (2) presentations about booster seat safety; (3) tailored communication to parents; (4) distribution of fact sheets/resources; (5) walk-around education; and (6) booster seat inspections.

The association between the GKB intervention and proper booster seat use was determined initially using univariate analysis. The association was also estimated using a generalized linear mixed model predicting a binomial outcome (booster seat use) for those aged 4 to 7 years, adjusted for child-level variables (age, sex, race/ethnicity) and car-level variables (vehicle type). The model incorporated the effects of clustering by site and by collection date to account for the possibility of repeated sampling.

Results: In the 8 project schools, booster seat use for children 4–7 years of age increased an average of 20.9 percentage points between P₀ and P₁ (P₀ = 4.8%, P₁ = 25.7%; odds ratio [OR] = 6.9; 95% confidence interval [CI], 5.5, 8.7; P < .001) and remained at that level in the P₂ time period (P₂ = 25.7%; P < .001, for P₀ vs. P₂) in the univariate analysis. The 14 comparison schools had minimal change in booster seat use. The multivariable model showed that children at the project schools were significantly more likely to be properly restrained in a booster seat after the intervention (OR = 2.7; 95% CI, 2.2, 3.3) compared to the P₀ time period and compared to the comparison schools.

Conclusion: Despite study limitations, the GKB program was positively associated with an increase in proper booster seat use for children 4–7 years of age in school settings among diverse populations in economically disadvantaged areas. These increases persisted into the following school year in a majority of the project schools. The GKB model may be a replicable strategy to increase booster seat use among school-age children in similar urban settings.     

Usability of non-standard lower anchor configurations for child restraint system (CRS) installation

Abstract

Objectives: The objective of this study was to determine whether the amount of tension required for proper child restraint system (CRS) installation varies with lower anchor spacing and to determine whether nonexperts can produce adequate tension on wider-than-standard lower anchor configurations.

Methods: CRSs were installed by certified child passenger safety technicians (CPSTs; n?=?6 subjects, n?=?72 installations) and nonexperts (n?=?30 subjects, n?=?120 installations) on a mock-up vehicle seat fixture with lower anchors set at 11 (standard), 15, 19, and 23 in. apart from one another. Each CPST installed a rear-facing (RF) infant base, RF convertible, and forward-facing (FF) convertible into each of the 4 spacing configurations in random order. The CPSTs were instructed to tighten the lower connector strap until the tension was exactly at the threshold between passing and failing the 1-in. test. Each nonexpert installed one CRS model into all 4 spacing conditions in random order. Nonexperts were instructed to install the CRS to the best of their ability. The tension produced on the lower connector strap was recorded via load cell in the lower anchor assembly of the vehicle seat. Resultant tension magnitudes were compared across spacing conditions using matched pair t-tests. The CPSTs’ mean 1-in. test threshold values were compared to tensions produced by nonexperts. Installations were visually evaluated for errors and qualitative usability feedback was collected via survey.

Results: CPSTs installed the infant base with higher tensions in the 15-, 19-, and 23-in. configurations compared to the standard 11-in. configuration (P = .034, .032, and .003, respectively). The nonexperts installed the infant base with higher tension in the 15- and 23-in. configurations compared to the 11-in. configuration (P = .004 and .026, respectively). The RF convertible and FF convertible installations showed no significant differences in tension among any of the spacing configurations for either group. Only 19% of the nonexperts’ installations were tight enough to pass CPST thresholds, and the pass rate did not vary with respect to lower anchor spacing. In feedback surveys, the nonexpert group did not show a consistent preference for either standard or wider-than-standard lower anchor configurations.

Conclusions: The amount of tension required to pass the 1-in. rule did not vary with lower anchor spacing configurations for the RF and FF convertible CRS, but the infant base required more tension in wider anchor configurations. Nonexperts tended to produce less than ideal tension in all configurations, although their tension magnitudes increased for the infant base in wider configurations.     

Comparative Analysis of Variation in Ecological Forms of Altai Osman, <Emphasis Type="Italic">Oreoleuciscus potanini</Emphasis> (Cyprinidae), in Lakes Ayrag,Khyargas, and Nogon (Western Mongolia)

Analysis of variation in morphological characters of Potanin Altai osman, Oreoleuciscus potanini, from two freshwater and one brackish water lakes of Western Mongolia has shown that specimens of different ecological forms—herbivorous and piscivorous—form two integral and, at the level under consideration, internally indivisible units in the system of phenetic diversity of the species O. potanini.     

Factors Affecting Predator-Prey Distribution in a Protected Area,Tehran, Iran (a Case with Wolves and Wild Sheep)

We tried to model habitat suitability of two prey and predator species including wild sheep (Ovis orientalis) and wolf (Canis lupus) in Varjin protected area located in northern east of Tehran using a presence only method, maximum entropy (MaxEnt). Totally 11 environmental variables were measured in the species presence points which can be classified in three groups including topographical, vegetation and distal variables. Resulted maps indicated that habitat variables such as slope (ranging from 35 to 40 percent) and elevation (lower than 1700 meters above sea level) are both institute those factors which mostly affect studied prey and predator habitat use. Our results regarding prey and predator geographical range of used habitat indicated that wolves cover most area than wild sheep which show more dispersed habitat resources for the prey species. ENMTools test revealed that wolf’s niche breadth is more than twice as much as wild sheep’s. Wild sheep in Varjin protected area has a relatively narrow geographical extent and shows a tendency to marginal habitats while wolves cover obviously more areas which denotes its high mobility and low dependency to specific habitats.     

Spatial Distribution of Heavy Metals and <Superscript>137</Superscript>Cs in Spruce Forest Soil under Conditions of Regional Pollution

The influence of horizontal structure of spruce forest on the spatial distribution of acid-soluble Zn, Cd, Pb compounds and ¹³⁷Cs in the litter and the humus horizon of soddy podzolic soil has been studied in the territory with the regional background level of industrial fallout. It has been found that the distribution pattern of Zn in the forest litter is a result of biogeochemical processes. The litter in fern–wood sorrel microplots contains increased amounts of Zn and Cd, while the contents of Pb and ¹³⁷Cs are decreased. The distribution patterns of Pb and ¹³⁷Cs in the litter are positively correlated with each other, since both elements are deposited from the atmosphere, and similar mechanisms account for their redistribution in the spruce forest ecosystem.     

Variation in the Composition of Secondary Metabolites in <Emphasis Type="Italic">Flavocetraria</Emphasis> Lichens from Western Siberia

The composition and contents of secondary metabolites in Flavocetraria lichens from Eastern Siberia were analyzed using herbarium specimens. Based on the composition of identified metabolites, three F. cucullata chemotypes and two F. nivalis chemotypes were distinguished. Distinct geographic differentiation between the F. cucullata chemotypes was revealed, probably reflecting their adaptation to environmental conditions. The content of usnic acid in F. cucullata thalli was found to correlate with the latitude of growing region. This may be regarded as evidence for a protective role of this metabolite in lichens growing at high latitudes and exposed to excess solar irradiation during the polar day.     

Holocene Dynamics of Vegetation and Ecological Conditions in the Center of the East European Plain

Changes in the vegetation and fire regimes in the central East European Plain during the second half of the Holocene have been reconstructed based on the results of paleobotanical analysis and radiocarbon dating of material from a section of peat deposit in the Mordovia State Nature Reserve. It has been shown that birch–pine forests were widespread in the region between 7000 and 5000 yr BP, with the frequency of fires in that period being high (the fire return interval ranged from 10–20 to 100 years). Beginning from 5000 yr BP and to the early 20th century, broadleaf forests were dominant, with the fire return interval increasing to 300–500 years or longer.