Population characteristics of young African women influencing prenatal exposure to DDT (Manhiça, Mozambique)

The concentrations of dichlorodiphenyltrichloroethane (DDT) compounds in cord blood of 214 children born between 2003 and 2006 in Manhiça (Mozambique) have been determined. In this time interval, corresponding to the period before DDT reintroduction for indoor residual spraying, the observed values averaged 0.8 and 0.4 ng/ml for 4,4′-dichlorodiphenyldichloroethylene (4,4′-DDE) and 4,4′-DDT, respectively, and were similar to those found in western countries. However, the 4,4′-DDT/4,4′-DDE ratio was high indicating that the inputs of these compounds arriving to children in utero originated from recent uses of the insecticide. The strongest factor affecting DDT concentration was parity. A well-defined decreasing concentration trend was observed for the cord blood concentrations in the period of study. The trend was also observed for multiparae and primiparae mothers independently. Children from multiparae women showed much lower concentrations than primiparae women. Children from mothers with secondary school level exhibited lower concentrations of these pesticides than mothers with lower degree of education.     

Assessment of boscalid and pyraclostrobin disappearance and behavior following application of effective microorganisms on apples

ABSTRACT

The aim of this study is to assess the disappearance of boscalid (IUPAC name: 2-chloro-N-[2-(4-chlorophenyl)phenyl]pyridine-3-carboxamide) and pyraclostrobin (IUPAC name: methyl N-[2-[[1-(4-chlorophenyl)pyrazol-3-yl]oxymethyl]phenyl]-N-methoxycarbamate) residues in apple fruit, and to verify whether an organic fertilizer enriched with strains of antagonistic microorganisms can reduce pesticide residue levels. Field trials were conducted in a commercial orchard on apples of the Gloster variety, during 21 days after the treatment with Bellis 38 WG and the subsequent application of Zumba Plant formulation containing Bacillus spp., Trichoderma spp. and Glomus spp. In control samples, the decrease rate of boscalid and pyraclostrobin residue levels followed an exponential function, described by formulae R_t = 0.2824e^?0.071t and R_t = 0.1176e^?0.060t, with the coefficient of determination of r² = 0.8692 and r² = 0.9268, respectively. These levels dropped to half (t_1/2) of their initial values after 9.8 and 11.5 days, respectively. The treatment with Zumba Plant resulted in a reduction in boscalid and pyraclostrobin residue levels by 52% and 41%, respectively. The results of this study are of importance for horticulture sciences and for producers of apples using plant protection products (PPPs).     

As(V) retention on soils and forest by-products and other waste materials

As(V) retention capacity is determined by means of adsorption/desorption trials performed for coarse and fine ground mussel shell, forest and vineyard soils with or without fine shell, pine wood ash, oak wood ash, pine sawdust and slate-processing fines. Pine ash shows the highest arsenic retention potential (with >97 % adsorption and ≤1 % desorption), followed by shell-amended forest soil (adsorption between 96 and 92 %), by un-amended forest soil (adsorption between 98 and 86 %) and by the amended vineyard soil (adsorption between 92 and 75 %). Sawdust is the material with the lowest arsenic retention capacity in most cases, with un-amended vineyard soil also showing poor results. In the case of oak ash, As(V) percentage adsorption becomes higher with increasing added arsenic concentrations, while this increase in added arsenic causes lower percentage adsorption in the case of slate fines. Regarding adsorption ability, As(V) adsorption data were fitted to Freundlich and Langmuir models, showing good fitting, with pine ash and shell-amended forest soil having the highest K _F values. In view of that, mussel shell amendment would be useful to increase arsenic retention on forest and vineyard soils, while pine ash could be used to retain arsenic even from wastewaters.     

Evaluation of Human Exposure to Ambient PM10 in the Metropolitan Area of Mexico City Using a GIS-Based Methodology

ABSTRACT

The main goal of this study was to evaluate the magnitude of outdoor exposure to fine particulate matter (PM₁₀) potentially experienced by the population of metropolitan Mexico City. With the use of a geographic information system (GIS), spatially resolved PM₁₀ distributions were generated and linked to the local population. The PM₁₀ concentration exceeded the 24-hr air quality standard of 150 μg/m³ on 16% of the days, and the annual air quality standard of 50 μg/m³ was exceeded by almost twice its value in some places. The basic methodology described in this paper integrates spatial demographic and air quality databases, allowing the evaluation of various air pollution reduction scenarios. Achieving the annual air quality standard would represent a reduction in the annual arithmetic average concentration of 14 μg/m³ for the typical inhabitant. Human exposure to particulate matter (PM) has been associated with mortality and morbidity in Mexico City; reducing the concentration levels of this pollutant would represent a reduction in mortality and morbidity and the associated cost of such impacts. This methodology is critical to assessing the potential benefits of the current initiative to improve air quality implemented by the Environmental Metropolitan Commission of Mexico City.     

Diagnostic Study of Critical Circuits of the Kraft Pulp Production Process Considering the Environmental Aspects

Abstract

This paper describes systematic work undertaken in the field of atmospheric emissions from Portuguese Kraft pulp mills. The study led to the determination of emission factors from stationary sources, which proved to be an important tool for assessing the need for investment in air pollution abatement equipment, specifically for malodorous gases.     

Anaerobic Mesophilic Treatment of Cattle Manure in an Upflow Anaerobic Sludge Blanket Reactor with Prior Pasteurization

Abstract

Different autonomous communities located in northern Spain have large populations of dairy cattle. In the case of Asturias, the greatest concentration of dairy farms is found in the areas near the coast, where the elimination of cattle manure by means of its use as a fertilizer may lead to environmental problems. The aim of the present research work was to study the anaerobic treatment of the liquid fraction of cattle manure at mesophilic temperature using an upflow anaerobic sludge blanket (UASB) reactor combined with a settler after a pasteurization process at 70 °C for 2 hr. The manure used in this study came from two different farms, with 40 and 200 cows, respectively. The manure from the smaller farm was pretreated in the laboratory by filtration through a 1-mm mesh, and the manure from the other farm was pretreated on the farm by filtration through a separator screw press (0.5-mm mesh). The pasteurization process removed the pathogenic microorganisms lacking spores, such as Enterococcus, Yersinia, Pseudomonas, and coliforms, but bacterial spores are only reduced by this treatment, not removed. The combination of a UASB reactor and a settler proved to be effective for the treatment of cattle manure. In spite of the variation in the organic loading rate and total solids in the influent during the experiment, the chemical oxygen demand (COD) of the effluent from the settler remained relatively constant, obtaining reductions in the COD of ～85%.     

Sources and Concentrations of Indoor Nitrogen Dioxide in Barcelona,Spain

Abstract

Sources and concentrations of indoor nitrogen dioxide (NO₂) were examined in Barcelona, Spain, during 1996– 1999. A total of 340 dwellings of infants participating in a hospital-based cohort study were selected from different areas of the city. Passive filter badges were used for indoor NO₂ measurement over 7–30 days. Dwelling inhabitants completed a questionnaire on housing characteristics and smoking habits. Data on outdoor NO₂ concentrations were available for the entire period of the study in the areas of the city where indoor concentrations were determined. Bivariate analysis was performed to investigate relationships between indoor NO₂ concentrations on one hand and outdoor NO₂ concentrations, housing, and occupant characteristics on the other. Stepwise multiple linear regression was performed with variables that were 1996 and 27.02 ppb in 1999, with the highest yearly value of 27.82 ppb in 1997. In the same time period, mean outdoor NO₂ concentration ranged between 25.26 and 25.78 ppb with a peak of 30.5 ppb in 1998. Multiple regression analysis showed that principal sources of indoor NO₂ concentrations were the use of a gas cooker, the absence of an extractor fan when cooking, and cigarette smoking. The absence of central heating was also associated with higher NO₂ concentrations. Finally, each ppb increase in outdoor NO₂ was associated with a 1% increase in indoor concentrations.     

A spatial multicriteria model for determining air pollution at sample locations

Atmospheric pollution in urban centers has been one of the main causes of human illness related to the respiratory and circulatory system. Efficient monitoring of air quality is a source of information for environmental management and public health. This study investigates the spatial patterns of atmospheric pollution using a spatial multicriteria model that helps target locations for air pollution monitoring sites. The main objective was to identify high-priority areas for measuring human exposures to air pollutants as they relate to emission sources. The method proved to be viable and flexible in its application to various areas.

Implications:?Spatial multicriteria models provide a tool for air pollution management in urban areas. Analytic hierarchy process (AHP) modeling can help with the process of prioritizing monitoring site locations and minimizing costs.     

Application of simulation models to the diagnosis of MSW landfills: an example

Among the landfill simulation programs being developed by several research groups around the world as tools for the management of sanitary landfills is MODUELO, whose second version, MODUELO 2, has been presented elsewhere. It reproduces the operational history of the landfill and its hydrologic and biodegradation processes, allowing the estimation of the flow and pollutants emitted in the leachate and the generated landfill gas over time. This program has been used for a diagnosis study of an existing European MSW landfill. The construction and calibration of the facility's hydrologic model, based on the available data, allowed the detection and quantification of two sources increasing the flows reaching the leachate collection system: a small portion (6-7%) of the runoff over the landfill surface and the contribution of water coming from external hillsides of the same watershed that represent a total surface area of around 20ha. The contrast of the leachate quality (COD, BOD, NH(4)-N and TKN) simulation results and measured data showed the potential of these models for the assessment of other significant aspects in landfill operation such as the potential harnessing of the landfill gas. Nonetheless, in this case as in many others, the accuracy of the simulation results was limited by the scant quality of the available data, which highlights the need for implementing continuous monitoring and characterizing protocols to take advantage of these programs as a tool for landfill optimization.     

Clay charge reversal effects on aqueous polymer sorption on lateritic soils

The effects of charge reversal about the measured point of zero charge (pH(0) approximately 5.2) of untreated and treated Sete Lagoas lateritic soil of Brazil on aqueous polymer sorption was investigated. The polymers are anionic sodium carboxymethyl cellulose (CMCA), nonionic polyethylene oxide (PEO), and cationic polyacrylamide (PAM). They were prepared at aqueous concentrations and pH ranges of 0.1-2.0 g l(-1) and 2-9, respectively. Soil treatment involved the removal of iron oxides by treatment with dithionate-bicarbonate-citrate. Batch sorption test results show that the presence of iron oxides in lateritic soil tends to suppress sorption of CMCA (especially at pH=pH(0)) and PEO (for the whole pH range) but has uncertain effects on cationic PAM sorption. CMCA sorption on the untreated soil improves on either side of pH(0), in direct proportionality to solution concentration, except at pH<4.0, where disassociation of the polymer molecules may decrease sorption energy. Increase in the sorption of non-cationic polymers (CMCA and PEO) at pH>pH(0) is attributable to dispersion of clay, cation bridging and polymer molecular reconfiguration. For cationic PAM, electrostatic bonding to negatively charged soil particle surfaces accounts for the sorption increase. For treated soil samples, polymer sorption pattern is similar to those expected for the montmorillonitic clayey soils of temperate zones. These results indicate that the pH(0) of lateritic soils, within the regime that exists in the field, should be considered in assessing the potential effectiveness of polymer dust suppressants for tropical lateritic soils.