Kinetic Behavior in Melt State and Solid State Polymerization of Lactide Using Magnesium Stearate as Catalyst

Solid state polymerizations (SSP) and the kinetic behavior in melt state of l-lactide polymerizations employing magnesium stearate as catalyst were investigated. The solid state polymerizations were carried out in two steps where pre-polymers were first prepared in melt polymerizations at 180 °C and the subsequent post-polymerizations were performed around the Tc of polylactide (PLA). In order to find the initial SSP conditions, kinetic profiles of melt polymerizations of l-lactide with magnesium stearate were determined. According to the kinetics data the melt polymerizations were found to be first order with respect to lactide as evident from a linear relationship of logarithmic variations of l-lactide concentration versus time using catalyst/monomer ratios of 1:500 and 1:5,000. When the catalyst content is increased to 1:100 the relationship loses its linearity due to fast propagation in the early stages of the reaction. From the GPC data it can be noted that the molecular weight of PLA can be increased by 5–17 times under the conditions established for our SSP experiments. A comparison between the two step solid state polymerizations and already reported melt polymerizations using the same catalyst showed that SSP furnished polymers with much lower amount of polymer degradation.     

Relevant parameters for assessing the environmental impact of some pyridinium, ammonium and pyrrolidinium based ionic liquids

Several physico-chemical properties relevant to determine the environmental impact of ionic liquids - aqueous solubility, octanol/water partition coefficient, chromatographically derived lipophilicity and infinite dilution diffusion coefficients in water - were measured in ionic liquids based on pyridinium, ammonium and pyrrolidinium cations with bis(trifluoromethylsulfonyl)imide anions. The influence of the presence of hydroxyl or ester groups in the physico-chemical properties of these liquids was checked. It appeared that the presence of functional oxygenated moieties reduces the lipophilicity of ionic liquids and so decreases the risk of bioaccumulation in environment.     

Environmental mutagenicity and toxicity caused by sodium metabisulfite in sea shrimp harvesting in Piauí, Brazil

Sodium metabisulfite is used in marine shrimp harvesting to prevent the occurrence of black spots. Shrimps are soaked in a sodium metabisulfite solution in ice, which is disposed of in sewages that run into marine canals, creating an environmental hazard. This study evaluates the toxicity and mutagenicity caused by sodium metabisulfite in sea waters and sediments collected in a shrimp farm in Cajueiro da Praia (Luis Correia), state of Piauí, Brazil, using the Allium cepa assay. Water and sediment samples were collected in the dry and in the rainy seasons, in three sites: upstream the shrimp farm (Site 1), at the point sodium metabisulfite is discharged (Site 2), and 100 m downstream the farm (Site 3). Three sample dilutions were used (50%, 25% and 10%) for all samples. A negative control (well water) and a positive control (copper sulfate 0.0006 mg mL⁻¹) were used in each experiment. At the end of the 72-h exposure period, onion roots were measured and removed. Mutagenicity analysis included the determination of mitotic index, chromosomal aberrations and the detection of micronuclei; analysis of root size and mitotic index were used as an index of toxicity. The A. cepa assay revealed that the water and sediments samples collected in the Piauí coast contaminated with sodium metabisulfite induce toxicity. The results demonstrate that the assay may be used as a regular tool in the analysis of water parameters in shrimp farms in the coast of Piauí state, and in strategies to preserve the region’s marine ecosystem.     

Effects of tertiary treatment by fungi on organic compounds in a kraft pulp mill effluent

Background, aim and scope  

Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent).     

Cephalopods and cetaceans as indicators of offshore bioavailability of cadmium off Central South Brazil Bight

Regarding Brazilian coast, industrial and urban developments are concentrated along Central South Brazil Bight. Samples from inshore and offshore species from the concerned area were analyzed, comprising 24 cetaceans (9 species) and 32 squids (2 species). Cadmium was determined by GFAAS and our results were in agreement with certified values (DOLT-2, NRCC). Mean cadmium concentration (in microg/g, wet weight) observed in the digestive gland of sexually mature Argentine short-finned squids (Illex argentinus) was 1002.9. To our knowledge this is the highest cadmium level ever reported for a cephalopod. Concerning cetaceans, our results include one of the highest renal cadmium concentrations described for striped dolphins (71.29 microg/g, wet weight). Anthropogenic action, upwelling and cannibalism of Argentine short-finned squid on the studied area are possible reasons for such remarkable cadmium concentrations.     

Objectives and structure of the DRAIN project: an extensive study of the delivery from the drainage basin of the Venice Lagoon (Italy)

The Venice Lagoon and its drainage basin form a vast system, where historical and recent cities, large and medium-small industrial districts and intensive agricultural activities coexist within a peculiar environment. The drainage basin constituted of an ensemble of tributary sub-basins with contrasting characteristics and freshwater fluxes; the hydraulic pathways are generally complex and not univocally established. With the main objectives to measure the annual freshwater discharge into the Venice Lagoon and to estimate the related load of pollutants, an intense field activity was carried out in the ambit of the DRAIN project. The 12 main tributaries of the drainage basin were monitored for more than 2 years (1998-2000), obtaining a relevant data set of hydrodynamic, physico-chemical and chemical data. Integrative investigations were also developed in a multidisciplinary approach, covering the existing knowledge gaps on the hydrology and behaviour of such a complex system. The paper describes the characteristics of the system, the selected approach to investigate it, and the main project outcomes.