Seasonal and particle size-dependent variations in gas/particle partitioning of PCDD/Fs

This study monitored particle size-dependent variations in atmospheric polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Two gas/particle partitioning models, the subcooled liquid vapor pressure (P(L)(0)) and the octanol-air partition coefficient (K(OA)) model, were applied to each particle sizes. The regression coefficients of each fraction against the gas/particle partition coefficient (K(P)) were similar for separated particles within the same sample set but differed for particles collected during different periods. Gas/particle partitioning calculated from the integral of fractions was similar to that of size-segregated particles and previously measured bulk values. Despite the different behaviors and production mechanisms of atmospheric particles of different sizes, PCDD/F partitioning of each size range was controlled by meteorological conditions such as atmospheric temperature, O(3) and UV, which reflects no source related with certain particle size ranges but mixed urban sources within this city. Our observations emphasize that when assessing environmental and health effects, the movement of PCDD/Fs in air should be considered in conjunction with particle size in addition to the bulk aerosol.     

Spatial and temporal variations of mercury levels in Okefenokee invertebrates: southeast Georgia

Accumulation of mercury in wetland ecosystems has raised concerns about impacts on wetland food webs. This study measured concentrations of mercury in invertebrates of the Okefenokee Swamp in Georgia, focusing on levels in amphipods, odonates, and crayfish. We collected and analyzed total mercury levels in these invertebrates from 32 sampling stations across commonly occurring sub-habitats. Sampling was conducted in December, May, and August over a two-year period. The highest levels of mercury were detected in amphipods, with total mercury levels often in excess of 20 ppm. Bioaccumulation pathways of mercury in invertebrates of the Okefenokee are probably complex; despite being larger and higher in the food chain, levels in odonates and crayfish were much lower than in amphipods. Mercury levels in invertebrates varied temporally with the highest levels detected in May. There was a lack of spatial variation in mercury levels which is consistent with aerial deposition of mercury.     

Enhancement of the CO(2) retention capacity of X zeolites by Na- and Cs-treatments

Adsorption of carbon dioxide on alkaline modified X zeolites was investigated by temperature programmed desorption (TPD) analysis of these materials previously saturated with CO(2) at 50, 100 and 200 degrees C. Parent X zeolite (in its sodium form) was treated with different sodium and cesium aqueous solutions, using both carbonates and hydroxides as precursors. The resulting materials were characterised by nitrogen physisorption, XRD, and NH(3)-TPD, in order to determine their morphological, crystallographic and chemical properties. Slight desilication phenomena were observed using hydroxides as precursors, whereas the treatment with Cs salts lead to higher crystallinity losses. Several successive adsorption-desorption cycles were carried out in order to check the regenerability of the adsorbents. Cesium-treated zeolites present higher carbon dioxide retention capacities than the sodium treated and than the parent material. When working with these Cs-modified materials, the desorption takes place mainly at temperatures between 250 and 400 degrees C, results of great practical interest, since it allows the use these kinds of materials for adsorption-desorption cycles. The evolution of the retention capacity with temperature is also markedly more positive for Cs-treated zeolite, especially when carbonate is used as the precursor. These materials maintain high retention capacities at 100 degrees C (10mg g(-1)) and even at 200 degrees C (3mg g(-1)), temperatures at which the most of the adsorbents are inactive.     

A comparison of the low frequency electrical signatures of iron oxide versus calcite precipitation in granular zero valent iron columns

Geophysical methods have been proposed as technologies for non-invasively monitoring geochemical alteration in permeable reactive barriers (PRBs). We conducted column experiments to investigate the effect of mineralogy on the electrical signatures resulting from iron corrosion and mineral precipitation in Fe0 columns using (a) Na2SO4, and (b) NaHCO3 plus CaCl2 mixture, solutions. At the influent interface where the reactions were most severe, a contrasting time-lapse electrical response was observed between the two columns. Solid phase analysis confirmed the formation of corrosion halos and increased mineralogical complexity in the corroded sections of the columns compared to the minimal/non-corroded sections. We attribute the contrasting time-lapse signatures to the differences in the electrical properties of the mineral phases formed within the two columns. While newly precipitated/transformed polarizable and semi-conductive iron oxides (mostly magnetite and green rust) increase the polarization and conductivity of the sulfate column, the decrease of both parameters in the bicarbonate column is attributed to the precipitation of non-polarizable and non-conductive calcite. Our results show that precipitate mineralogy is an important factor influencing the electrical properties of the corroded iron cores and must be considered if electrical geophysical methods are to be developed to monitor PRB barrier corrosion processes in situ.     

Concentrations and specific loads of brominated flame retardants in sewage sludge

Many substances related to human activities end up in wastewater and accumulate in sewage sludge. The present study focuses on two classes of brominated flame retardants: polybrominated diphenyl ethers (BDE28, BDE47, BDE49, BDE66, BDE85, BDE99, BDE100, BDE119, BDE138, BDE153, BDE154, BDE183, BDE209) and hexabromocyclododecane (HBCD) detected in sewage sludge collected from a monitoring network in Switzerland. Mean concentrations (n=16 wastewater treatment plants) were 310, 149, 95 and 17microg per kg dry matter for decaBDE, HBCD, penta- and octaBDE, respectively. These numbers correspond well with other studies from European countries. DecaBDE, HBCD, penta- and octaBDE showed average specific loads (load per connected inhabitant per year) in sludge of 6.1, 3.3, 2.0 and 0.3mgcap(-1)yr(-1), respectively. This is in line with consumption and storage of the compounds in the environment and the anthroposphere. Discrepancies observed for octaBDE and HBCD can be explained by the release from materials where these compounds are incorporated in and/or their degradation during anaerobic sludge treatment. Loads from different types of monitoring sites showed that brominated flame retardants ending up in sewage sludge originate mainly from surface runoff, industrial and domestic wastewater.     

Removal and degradation of aromatic compounds from a highly polluted site by coupling soil washing with photocatalysis

The possible application of two environmental remediation technologies - soil washing and photocatalysis - to remove and decompose various aromatic pollutants present in excavated soils of a contaminated industrial site has been investigated. Aqueous solutions containing the non-ionic surfactant Brij 35 were used to extract the contaminants from the soil samples. The photocatalytic treatment of the obtained washing wastes, performed in the presence of TiO(2) suspensions irradiated with simulated sunlight, showed a slow abatement of the toxic compounds due to the relevant concentrations of organics in the waste. A neat improvement of the process performances, obtained by operating in the presence of added potassium peroxydisulfate, suggests a feasible treatment route.     

Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis

Pine wood, pine bark, oak wood and oak bark were pyrolyzed in an auger reactor. A total of 16 bio-oils or pyrolytic oils were generated at different temperatures and residence times. Two additional pine bio-oils were produced at the National Renewable Energy Laboratory in a fluidized-bed reactor at different temperatures. All these bio-oils were fractionated to obtain lignin-rich fractions which consist mainly of phenols and neutrals. The pyrolytic lignin-rich fractions were obtained by liquid-liquid extraction. Whole bio-oils and their lignin-rich fractions were studied as potential environmentally benign wood preservatives to replace metal-based CCA and copper systems that have raised environmental concerns. Each bio-oil and several lignin-rich fractions were tested for antifungal properties. Soil block tests were conducted using one brown-rot fungus (Gloeophyllum trabeum) and one white-rot fungus (Trametes versicolor). The lignin-rich fractions showed greater fungal inhibition than whole bio-oils for a impregnation solution 10% concentration level. Water repellence tests were also performed to study wood wafer swelling behavior before and after bio-oil and lignin-rich fraction treatments. In this case, bio-oil fractions did not exhibit higher water repellency than whole bio-oils. Comparison of raw bio-oils in soil block tests, with unleached wafers, at 10% and 25% bio-oil impregnation solution concentration levels showed excellent wood preservation properties at the 25% level. The good performance of raw bio-oils at higher loading levels suggests that fractionation to generate lignin-rich fractions is unnecessary. At this more effective 25% loading level in general, the raw bio-oils performed similarly. Prevention of leaching is critically important for both raw bio-oils and their fractions to provide decay resistance. Initial tests of a polymerization chemical to prevent leaching showed some success.     

Variability in microbial carbon isotope fractionation of tetra- and trichloroethene upon reductive dechlorination

The variability of stable carbon isotope fractionation upon reductive dechlorination of tetra- and trichloroethene by several microbial strains was investigated to examine the uncertainties related to the in situ application of compound specific isotope analysis (CSIA) of chlorinated ethenes. Carbon isotope fractionation was investigated with a set of microorganisms representative for the currently known diversity of dehalorespirers: Dehalococcoides ethenogenes strain 195, Desulfitobacterium sp. strain Viet1, Desulfuromonas michiganensis and Geobacter lovleyi sp. strain SZ and compared to the previous reports using Sulfurospirillum spp. and Desulfitobacterium sp. strain PCE-S. Carbon isotope fractionation of tetrachloroethene (PCE) and trichlorethene (TCE) was highly variable ranging from the absence of significant fractionation to carbon isotope fractionation (epsilonC) of 16.7 and 3.5-18.9 for PCE and TCE, respectively. Fractionation of both compounds by D. ethenogenes strain 195 (PCE: epsilonC=6.0; TCE: epsilonC=13.7) was similar to the literature data for mixed cultures containing Dehalococcoides spp. D. michiganensis (PCE: no significant fractionation; TCE: epsilonC=3.5) and G. lovleyi sp. strain SZ (PCE no significant fractionation; TCE: epsilonC=8.5) generated the lowest fractionation of all studied strains. Desulfitobacterium sp. strain Viet1 (PCE: epsilonC=16.7) gave the highest enrichment factor for PCE.     

Distribution characteristics of nonylphenolic chemicals in Masan Bay environments, Korea

To understand the distribution characteristics of nonylphenolics and sterols, samples such as in creek water, sea surface water, waste water treatment plant (WWTP) effluent water, sediment and mussel were collected and analyzed. The principal analytes are nonylphenol (NP), nonylphenol monoethoxylate (NP1EO), nonylphenol diethoxylate (NP2EO), coprostanol (5beta) and cholestanol (5alpha). All these target pollutants showed 100% detection frequency in all of the samples analyzed. Total concentration of nonylphenolic compounds ranged from 334 to 3628ngl(-1) (average: 1331ngl(-1)) in creek water, from 15 to 36400ngl(-1) (average: 1013ngl(-1)) in sea surface water, from 131 to 2811ngg(-1) dry weight (average: 581ngg(-1) dry weight) in sediment and from 50.5 to 289ngg(-1) dry weight (average: 139ngg(-1) dry weight) in mussel. For water samples, levels of nonylphenolics determined in summer season were higher than those in spring season. Among them, nonylphenol and NP1EO was dominant in creek water and seawater, respectively. The highest concentration was recorded in sediment near a WWTP effluent outlet. And high levels of nonylphenolics and sterols were found in about 3km area surrounding WWTP effluent outlet. Coefficient of linear regression (R(2)) for NP in mussel and in sediment was 0.90. Similarly good correlation (R(2)=0.98) was obtained between concentration in water and in mussel indicating that a steady state has been reached in this bay. The calculated bio concentration factor (BCF=2990) for NP in Masan Bay agrees well with reported values in the literature.     

Behaviour and biodegradation of sulfonamides (p-TSA, o-TSA, BSA) during drinking water treatment

Three sulfonamides -para-toluenesulfonamide (p-TSA), ortho-toluenesulfonamide (o-TSA) and benzenesulfonamide (BSA) - have recently been detected in groundwater within a catchment area of one drinking water treatment plant (DWTP), which is located downstream of a former sewage farm. The degradation pathways of p-TSA, o-TSA and BSA were investigated during drinking water treatment with incubation experiments and an experimental filter. Incubation experiments showed that p-TSA is removed during the treatment by microbiological processes. Removal of p-TSA is performed by adapted microorganisms only present in polluted groundwater. The elimination in an experimental filter of 1.6m length applying filtration velocities from 2 to 6 m h(-1) was approximately 93% of p-TSA. The microbial degradation rates in the incubation experiment were approximately 0.029 microg l(-1) h(-1) (zero order reaction). In the experimental filter, the reaction rate constants were around 0.0063 s(-1) for all filtration velocities (1st order reaction). Drinking water treatment does not reduce the concentration of o-TSA and BSA under conditions encountered in Berlin. p-TSA, o-TSA and BSA were only measured in the low microg l(-1) concentrations range in the purified water.