Modelling of Materials Policies

This paper discusses the REAP1 model and its application for the analysis of CO₂ reduction and waste management policies for Japanese petrochemicals. The pros and cons of this modelling approach in comparison to other tools is elaborated. This is followed by a discussion of the model code and the modelling results. The results show that CO₂ policies can have significant impacts on waste flows and waste policies can have significant CO₂ benefits. As a consequence both effects must be considered in policy assessment. Pricing instruments are recommended instead of regulations because of the complex physical relations in the materials life cycle that extend beyond sector boundaries. A taxation approach is superior to a subsidy approach because rebound effects can be avoided.     

Accumulation of metals in the soil of an overland flow wastewater treatment system

Accumulation of Co, Cu, Cr, Mo, Ni, Pb and Zn was evaluated in a soil profile of an overland flow system used for the post-treatment of urban wastewater. A pilot version of the overland flow system received urban wastewater from five up-flow anaerobic filters filled with bamboo (Bambusa tuldoides) rings. The anaerobic effluent was applied as feed over 18 months at rates varying from 7 to 28 L min(-1), to a vegetated slope length covered with Tifton 85 (Cynodon) sp. grass. Soil and plant samples were collected in triplicate from the top to the bottom of the slope. In addition, the soils were sampled at the depths 0-20 and 20-40 cm. The metal concentrations found in the overall system were compared to those obtained in a control area located at the beginning of the slope onto which nothing was applied. A month of monitoring the urban wastewater of Limeira City (S?o Paulo State, Brazil) showed a drastic change in metals concentration due to the irregular discharge of industrial waste. This irregular discharge introduces Cr, Cu, Ni, Pb and Zn into the system used to treat domestic wastewater. The mass balance indicates the accumulation of metals in the soil and the translocation to the plants; also that they could be evapotranspirated, percolated and discharged.     

Distribution of Chlorinated Organic Pollutants in Harbor Sediments of Livorno (Italy): A Multivariate Approach to Evaluate Dredging Sediments

Dredging is a very important procedure for harbor management. InItaly the guidelines for the offshore dumping of dredged materials are issued by the Ministry of Environment. Theydescribed a few steps of dredging activities, such as thesampling strategy, but do not deal with limits or guide-valuesfor the chemical, physical and biological composition of theresulting sediments. The quality of dredged materials is mainlydependent on the presence of inorganic and organic pollutants.In particular, polychlorinated biphenyls (PCBs) and organo-chlorinated pesticides are seen as a high priority inmarine environment by international organizations because oftheir persistence, toxicity and bioaccumulation capacity.In this article the presence of some PCBs and organo-chlorinatedpesticides in sediment samples collected from the harbor ofLivorno (Northern Tyrrhenian Sea) was investigated. Theconcentration of HCHs, Aldrin, Chlordanes, DDEs, DDTs, and PCBsin 12 representative sites ranged between <1 g kg^–1and 95, 19, 32, 35, 107, and 111 g kg^–1, respectively.The application of univariate and multivariate statisticaltechniques, such as linear regression analysis and principalcomponent analysis, to the experimental data showed a differentdistribution of PCBs in the two sediment layers. On thecontrary, the vertical distribution of the other investigatedpollutants was more homogeneous and affected by randomvariability. The multivariate approach was an important tool to establish more rational criteria for the management of dredged materials.     

Nitrogen isotope ratios in pine bark as an indicator of N emissions from anthropogenic sources

The article describes the use of Scots pine bark to identifynitrogen sources in eastern Germany, as well as background areas in Russia and Bulgaria, by using natural isotope ratios of total nitrogen (N_t) and individual N compoundssuch as ammonium (NH₄ ⁺), nitrate (NO₃ ^-)and amid nitrogen (amide-N). The samples collected were analysed using an elemental analyser in connection with a gas isotope mass spectrometer (EA-IRMS). Natural ¹⁵N abundances in pine bark from impact areas suggest that the ammonium accumulated on the surface of the bark is releasedfrom livestock management. Bark of Scots pines growing near agricultural land had highly depleted ¹⁵N_t values (between –8 and –12), while bark from background areas (unpolluted areas) displayed slightly negative ¹⁵N_t values (mean ¹⁵N_t = –3.8). It is assumed that part of the N adsorbed on the bark surface is mainly derived from ammonia(mean ¹⁵N_t = –40.3) escaping from livestock housing and during the application of manure. This assumption is confirmed by experiments under controlled conditions in which manure samples were spread on soil. In addition, temporal and spatial variations of ¹⁵N_t abundances in pine bark from various locations in eastern Germany as wellas pine stands in Nature Park Dübener Heath are discussed.     

Preliminary air pollution monitoring in San Miguel, Buenos Aires

Passive diffusion samplers were employed in San Miguel(Buenos Aires Metropolitan Area) for a preliminary airpollution monitoring. The highest loads were observedin downtown, compared with an urban background site.Total suspended particulate matter (TSPM) varied from0.257 to 0.033 mg cm^-2 month^-1; dust was examinedfor particle nature and size distribution. A similartrend was observed for nitrogen dioxide (NO₂) andTSPM spatial distribution, suggesting that traffic isthe major pollution source. Sulphur dioxide (SO₂)values were low and rather homogeneous. Levels for theinvestigated pollutants are below EPA's guide linevalues. Geographic (flat area, near to Rio de LaPlata) and climatologic factors (rainfalls andvariable wind directions) contribute to disperse pollutants.     

Application of intrawell testing of RCRA groundwater monitoring data when no upgradient well exists

A statistical quality control approachto detect changes in groundwater quality from aregulated waste unit is described. The approachapplies the combined Shewhart-CUSUM control chartmethodology for intrawell comparison of analyteconcentrations over time and does not require anupgradient well. A case study from the U.S.Department of Energy's Hanford Site is used forillustration purposes. This method is broadlyapplicable in groundwater monitoring programs wherethere is no clearly defined upgradient location, thegroundwater flow rate is exceptionally slow, or wherea high degree of spatial variability exists inparameter concentrations. This study also indicatesthat the use of the Data Quality Objectives (DQO)process can assist in designing an efficient andcost-effective groundwater monitoring plan to achievethe optimum goal of both low false positive and lowfalse negative rates (high power).     

An Evaluation of Selenium Concentrations in Water, Sediment, Invertebrates, and Fish from the Republican River Basin: 1997–1999

The Republican River Basin of Colorado,Nebraska, and Kansas lies in a valley which contains PierreShale as part of its geological substrata. Selenium is anindigenous constituent in the shale and is readily leached intosurrounding groundwater. The Basin is heavily irrigated throughthe pumping of groundwater, some of which is selenium-contaminated, onto fields in agricultural production. Water,sediment, benthic invertebrates, and/or fish were collected from46 sites in the Basin and were analyzed for selenium to determinethe potential for food-chain bioaccumulation, dietary toxicity,and reproductive effects of selenium in biota. Resultingselenium concentrations were compared to published guidelines orbiological effects thresholds. Water from 38% of the sites (n = 18) contained selenium concentrations exceeding 5 g L^-1, which is reported to be a high hazard for selenium accumulation into the planktonic food chain. An additional 12 sites (26% of the sites) contained selenium in water between 3–5 g L^-1, constituting a moderate hazard. Selenium concentrations in sedimentindicated little to no hazard for selenium accumulation fromsediments into the benthic food chain. Ninety-five percent ofbenthic invertebrates collected exhibited selenium concentrationsexceeding 3 g g^-1, a level reported as potentially lethal to fish and birds that consume them. Seventy-five percent of fish collected in 1997, 90% in 1998, and 64% in 1999 exceeded 4 g g^-1selenium, indicating a high potential for toxicity andreproductive effects. However, examination of weight profilesof various species of collected individual fish suggestedsuccessful recruitment in spite of selenium concentrations thatexceeded published biological effects thresholds for health andreproductive success. This finding suggested that universalapplication of published guidelines for selenium may beinappropriate or at least may need refinement for systems similarto the Republican River Basin. Additional research is needed todetermine the true impact of selenium on fish and wildliferesources in the Basin.     

Ambient Air Quality Monitoring Network Design for Assessing Human Health Impacts from Exposures to Airborne Contaminants

Existing methods of establishing ambientair quality monitoring networks typically evaluateonly parameters related to ambient concentrations ofthe contaminant(s) of interest such as emissionsource characteristics, atmospheric transport anddispersion, secondary reactions, depositioncharacteristics, and local topography. However,adverse health risks from exposures to airbornecontaminants are a function of the contaminant andthe anatomic and physiologic characteristics of theexposed population. Thus, ambient air qualitymonitoring networks designed for the protection ofpublic health or for epidemiological studiesevaluating adverse health impacts from exposures toambient air contaminants should account for bothcontaminant characteristics and human healthparameters. A methodology has been establishedwhich optimizes ambient air quality monitoringnetworks for assessments of adverse human healthimpacts from exposures to airborne contaminants byincorporating human health risk assessmenttechniques. The use of risk assessment techniquesas the basis for designing ambient air qualitymonitoring networks will help to target limitedfinancial and human resources to evaluate humanhealth risks from exposures to airbornecontaminants.     

A Watershed-based Cumulative Risk Impact Analysis: Environmental Vulnerability and Impact Criteria

Swine Concentrated Animal Feeding Operations (CAFOs) have received much attention in recent years. As a result, a watershed-based screening tool, the Cumulative Risk Index Analysis (CRIA), was developed to assess the cumulative impacts of multiple CAFO facilities in a watershedsubunit. The CRIA formula calculates an index number based on: 1) the area of one or more facilities compared to the area of the watershed subunit, 2) the average of the environmental vulnerability criteria, and 3) the average of the industry-specific impact criteria. Each vulnerability or impact criterion is ranked on a 1 to 5 scale, with a low rank indicating low environmental vulnerability or impact and a high rank indicating high environmental vulnerability or impact. The individual criterion ranks, as well as the total CRIA score, can be used to focus the environmental analysis and facilitate discussions with industry, public, and other stakeholders in the Agency decision-making process.     

The extraction of aged polycyclic aromatic hydrocarbon (PAH) residues from a clay soil using sonication and a Soxhlet procedure: a comparative study

A sonication method was compared with Soxhlet extraction for recovering polycyclic aromatic hydrocarbons (PAH) from a clay soil that had been contaminated with tar materials for several decades. Using sonication over an 8 h extraction period, maximum extraction of the 16 US EPA priority PAH was obtained with dichloromethane (DCM)-acetone (1 + 1). The same procedure using hexane-acetone (1 + 1) recovered 86% of that obtained using DCM-acetone (1 + 1). PAH recovery was dependent on time of extraction up to a period of 8 h. The sonication procedure showed that individual PAH are extracted at differing rates depending on the number of fused rings in the molecule. Soxhlet extraction [with DCM-acetone (1 + 1)] over an 8 h period recovered 95% of the PAH removed by the sonication procedure using DCM-acetone (1 + 1), indicating that rigorous sonication can achieve PAH recoveries similar to those obtained by Soxhlet extraction. The lower recovery with the Soxhlet extraction was explained by the observed losses of the volatile PAH components after 1-4 h of extraction. The type of solvent used, the length of time of extraction and extraction method influenced the quantification of PAH in the soil. Therefore, the study has implications for PAH analyses in soils and sediments, and particularly for contaminated site assessments where the data from commercial laboratories are being used. The study emphasizes the importance of establishing (and being consistent in the application of) a vigorous extraction, particularly for commercial laboratories that handle samples of soil in batches (at different times) from a single site investigation or remediation process. The strong binding of PAH to soil, forming aged residues, has significant implications for extraction efficiency. This paper illustrates the problem of the underestimation of PAH using the US EPA method 3550, specifically where a surrogate spike is routinely employed and the efficiency of the extraction procedure for aged residues is unknown. The implications of this study for environmental monitoring, particularly where numerous batches of samples from a single site assessment or remediation program are submitted to commercial laboratories, is that it would be advisable for these laboratories to check their existing method's extraction efficiencies by conducting a time course sonication extraction on their particular soil to determine the optimum extraction time.