Assessment of hydrocarbon emissions from diesel invert mud residues treated in a bioreactor

Hydrocarbon emissions from a diesel invert mud residue (DIMR) were monitored while the hydrocarbons were being biodegraded in a solid‐phase bioreactor. Five to twenty percent of the reduction in diesel hydrocarbons was attributed to evaporation depending on the treatment, i.e. homogenization, cultivation, and aeration. Most of these volatile hydrocarbons were linear C₈ — C₁₂ alkanes and one‐ring aromatics. Of the treatments aeration had the largest effect on emissions; forced air through the bottom of the bioreactor cells increased emissions by three times over that of the non‐aerated cells. Cultivation increased hydrocarbon emission concentration as much as twofold over the pre‐cultivation value, however, emissions returned to the original levels within 12 hours. Homogenization had the least effect of all treatments. Diurnally, the emission rate was 40% higher in late afternoon than at midnight; the cause of which was probably atmospheric fluctuations such as temperature and solar radiation. The effects of daily atmospheric fluctuations were empirically modeled and taken into account for determining the total volume of emissions.     

Autotrophic denitrification using hydrogen oxidizing bacteria in continuous flow biofilm reactor

Autotrophic denitrification was investigated in five bench‐scale upflow attached growth reactors using hydrogen oxidizing bacteria under anoxic conditions. The performance of sand, granular activated carbon (GAC), crushed pumice, crushed volcanic rock, and plastic media were evaluated as the support material. The reactors were inoculated with acclimated cultures obtained from domestic sewage treatment plant. A synthetic solution containing nitrate was used as the influent. The reactor performance was evaluated by measuring influent and effluent nitrate concentration. The design parameters demonstrated that the effectiveness of autotrophic denitrification is comparable to that of the heterotrophic process and may be utilized economically for drinking water treatment either as the main process or as a supplemental process for ion exchange regenerant treatment.     

Potentiometric studies of mixed complexes of cobalt(II) and copper(II) with l‐Asparagine and adenine

A potentiometric titration technique has been used to determine the stability constants for the various complexes of Co(II) and Cu(II) with L‐asparagine and from DNA base, e.g. adenine. Stability constants of ternary systems have been evaluated by the method suggested by Irwing‐Rossotti. In addition, the conditional constants were calculated as a function of pH. The maximum values of the conditional formation constants were found to be in accordance with the mixed‐ligand complex formation constants in a determined pH region. Furthermore, the molar fractions of different species from mixed complexes were calculated by means of formation constants. The values of stability constants of mixed‐ligand complexes at 25°C are as follows: log K= 5.25 for Co(II)‐L‐asparagine‐adenine; log K= 9.30 for Cu(II)‐L‐asparagine‐adenine. The ionic strength was kept constant at I = 0.20 with NaClO₄.     

Applicability of Montreal Process Criterion 4 — soil and water conservation — to rangeland sustainability

SUMMARY

Criterion 4 of the Montreal Process addresses the conservation of soil and water resources as a way to assess the sustainability of a nation's forests. For the most part, the indicators under this criterion are relevant to rangelands. The area and percent of rangeland with significant soil erosion apply equally well to both biomes. Percent of streams with flow rates and timing outside its range of historical variation is also equally important, although a measure of proper functioning and condition may provide a better measure of the indicator. The area and percent of rangeland with diminished soil productive capability because of a loss of reduced organic matter or changed physical characteristics can be useful indicators locally and regionally.     

Restrictions and options: A heuristic tool to integrate knowledge for strategies towards a sustainable development

SUMMARY

This article presents the heuristic ‘Restrictions and Options’ that was created in an interdisciplinary research team to identify restricting and supporting factors regarding sustainable ways of actions for different institutional and individual actors in the need-field of nutrition. The heuristic format is first presented on a general level. Then it is combined with two different approaches: first, with a systemic constructivist approach to organization theory, and second, with the ipsative theory of action (psychology). Its abilities are illustrated by examples from two research projects.

The heuristic tool was developed to help identify relevant factors that restrict or support sustainable development in two empirical settings and also could be used to compare the findings. Combining the two approaches remains for future research.     

Molecular characterisation of high-strength polycyclic aromatic hydrocarbon (PAH)-degrading and phenol-tolerant bacteria obtained from thermal power plant wastewater

This article reports the successful isolation and molecular characterisation of nine different phenol-tolerant and polycyclic aromatic hydrocarbon (PAH)-degrading Gram-positive bacterial species of diverse genera from the effluents of various industries. Based on similarity matrix studies, isolates Corynebacterium sp. DST1, Lysinibacillus sp. and Planococcus sp. showed<97% similarity, suggesting the possibility of new species in their respective genera.     

Some aspects of heavy metals contamination remediation and role of biosurfactants

Contamination by heavy metals is the result of different industrial activities. The presence of heavy metals in soil and water causes serious problems, as these materials are not biodegradable and do contaminate both biological systems and the subsoil. Biological surface-active compounds otherwise known as biosurfactants in general and rhamnolipids biosurfactants in particular have been successfully employed in the remediation of environments contaminated with heavy metal ions. The aim of the present review is to highlight potential applications of these tensioactive compounds for use in environmental heavy metals removal and bioremediation and processes involved.     

Changes in nutrient content and stable isotope ratios of C and N during decomposition of seagrasses and mangrove leaves along a nutrient availability gradient in Florida Bay,USA

The decomposition of the mangrove Rhizophora mangle and the seagrass Thalassia testudinum was examined using litterbags along a natural gradient in nutrient availability. Seagrass leaves had a higher fraction of their biomass in the labile pool (57%), compared to mangrove leaves (36%) and seagrass rhizomes (29%); the overall decomposition rates of the starting material reflected the fractionation into labile and refractory components. There was no relationship between the N or P content of the starting material and the decomposition rate.

Nutrient availability had no influence on decomposition rate, and mass was lost at the same rate from litterbags that were buried in the sediment and litterbags that were left on the sediment surface. The dynamics of N and P content during decomposition varied as a function of starting material and burial state. N content of decomposing mangrove leaves increased, but seagrass rhizomes decreased in N content during decomposition while there was no change in seagrass leaf N content. These same general patterns held for P content, but buried seagrass leaves increased in P content while surficial leaves decreased. δ¹³C and δ¹⁵N changed by as much as 2‰ during decomposition.     

Effect of cypermethrin on breeding performances of a freshwater fish,Labeo rohita (Hamilton)

Abstract

Concentrations of the related elements calcium, strontium, barium, and lead were determined in soil extract, consumer stomach contents, and consumers in lead polluted and unpolluted areas. Discrimination against the nonessential metals relative to the nutritious metal calcium, as the metals were transferred through a trophic pathway was determined. Discrimination of metals varied systematically as a function of degree of nonessential element similarity to calcium. The existence of systematic trends of discrimination may facilitate the assessment of natural levels of some toxic elements (e.g. lead) in organisms.     

Assimilation of Fenthion in Coastal Water

Fenthion [O.O-dimethyl 0-3-methy1-4(methylthio) phenyl phosphorothioate] is one of the most used mosquito insecticides in Florida, USA. Aerially applied insecticides may accidentally drift into estuarine coastal water and affect non-target organisms (Johnson and Finley, 1980; Kenaga, 1979; Patterson and Von Windeguth, 1964; Ray and Stevens, 1970). A field spray and a laboratory study were conducted to determine the persistence and disappearance rates of fenthion in the water and its toxicity on non-target organisms. This paper summarizes the results of the study and determines the assimilation capacity of fenthion in coastal waters. The fenthion is often applied as a thermal fog by a DC-3 aircraft. The thermal fog mixture contains 1.5% fenthion, 33.5% fog oil and 65% No. 2 diesel fuel. The spray duration was one to two minutes as the plane made its swath directly over the target site. The field spray was in St. Lucie County Impoundment on the east coast of Florida, USA. Before and after the spray, water samples were collected at different time intervals up to 48 hours to determine the fenthion concentration and their disappearance rates in the coastal water (Wang et al., 1987).