Distribution and transport of coal tar-derived PAHs in fine-grained residuum

We investigated the distribution and transport of coal tar-derived polycyclic aromatic hydrocarbons (PAHs) in fine-grained residuum and alluvial floodplain deposits that underlie a former manufactured gas plant. All 16 USEPA priority pollutant PAHs are present at this site and have penetrated the entire 4-5m thickness of clayey sediments, which unconformably overly limestone bedrock. Concentrations of less hydrophobic PAHs (e.g., naphthalene, 0.011-384mg kg(-1)) were about 10 times higher than those of highly hydrophobic PAHs (e.g., benzo[g,h,i]perylene -0.002 to 56.03mgkg(-1)). Microscopic examination of thin-sections of the clay-rich sediments showed that fractures and rootholes, which can act as pathways for flow, occur throughout the profiles. Tarry residue was found coating some fractures and rootholes, indicating that coal tar was, in some cases, able to penetrate as an immiscible phase. However, in the vast majority of samples in which PAHs were detected, there was no detectable tar residue, suggesting that much of the transport occurred in the dissolved phase. Examination of thin-sections with an epifluorescent microscope indicated that PAHs, which fluoresce brightly when exposed to UV light, are distributed throughout the soil matrix, rather than being confined to fractures and rootholes. The widespread distribution of PAHs is most likely due to diffusion-controlled exchange between the fast-flow pathways in the fractures and rootholes and the relatively immobile water in the fine-grained matrix. This implies that fractures and rootholes can play a major role in controlling transport of highly hydrophobic compounds in fine-grained sediments, which would otherwise act as barriers to contaminant migration.     

Biodegradability of alkylates as a sole carbon source in the presence of ethanol or BTEX

The biodegradability of alkylate compounds in serum bottles was investigated in the presence and absence of ethanol or benzene, toluene, ethylbenzene, and p-xylene (BTEX). The biomass was acclimated to three different alkylates, 2,3-dimethylpentane, 2,4-dimethylpentane and 2,2,4-trimethylpentane in porous pot reactors. The alkylates were completely mineralized in all three sets of experiments. They degraded more slowly in the presence of BTEX than in their absence because BTEX inhibited the microbial utilization of alkylates. However, in the presence of ethanol, their slower biodegradation was not related to inhibition by the ethanol. Throughout the experiments alkylates, ethanol, and BTEX concentrations did not change in the sterile controls.     

Sulfidation treatment of molten incineration fly ashes with Na2S for zinc, lead and copper resource recovery

The present study focuses on the conversion of heavy metals involved in molten incineration fly ashes to metal sulfides which could be thereafter separated by flotation. The sulfidation treatment was carried out for five molten incineration fly ashes (Fly ash-A to Fly ash-E) by contacting each fly ash with Na(2)S solution for a period of 10 min to 6h. The initial molar ratio of S(2-) to Me(2+) was adjusted to 1.20. The conversion of heavy metals to metal sulfides was evaluated by measuring the S(2-) residual concentrations using an ion selective electrode. The formation of metal sulfides was studied by XRD and SEM-EDS analyses. In the case of Fly ash-A to Fly ash-D, more than 79% of heavy metals of zinc, lead and copper was converted to metal sulfides within the contacting period of 0.5h owing to a fast conversion of metal chlorides to metal sulfides. By contrast, the conversion of about 35% was achieved for Fly ash-E within the same contacting period, which was attributed to a high content of metal oxides. Further, the S(2-) to Me(2+) molar ratio was reduced to 1.00 to minimize Na(2)S consumption and the conversions obtained within the contacting period of 0.5h varied from 76% for Fly ash-D to 91% for Fly ash-C. Finally, soluble salts such as NaCl and KCl were removed during the sulfidation treatment, which brought about a significant enrichment in metals content by a factor varying from 1.5 for Fly ash-D to 4.9 for Fly ash-A.     

Leaded electronic waste is a possible source material for lead-contaminated jewelry

Highly leaded jewelry, often imported from China, remains widely available in the United States. Leaded electronic waste is exported from the United States to several Asian countries where solder is recovered and circuit boards are stripped of parts in small workshops. To assess whether electronic waste is being recycled into the jewelry, lead, tin and copper content of highly leaded jewelry samples were determined by atomic absorption spectrometry. Sixteen jewelry items previously determined to contain 20-80% lead by weight were analyzed. Samples were digested in nitric acid for analysis of lead and copper, and in aqua regia for analysis of tin. Six samples contained significant amounts of tin, from 20.8% to 29.9% by weight. In addition, copper was a significant minor component of five of these samples (up to 4% by weight). Copper (present at 10-40% by weight in circuit boards) was shown to rapidly move into heated lead-tin solder. The combined lead-tin-copper content of these six items ranges from 93.5% to 100%, suggestive of a solder-based source material. These results are consistent with the hypothesis that recycled circuit board solders are being used to produce some of the heavily leaded imported jewelry sold in the United States. Should this hypothesis be substantiated, it suggests that environmental policies to protect children's health must address both proper recycling of source materials as well as restrictions of the lead content in consumer goods.     

Novel low density granular adsorbents - properties of a composite matrix from zeolitisation of vermiculite

This paper reports the preparation and properties of a new low density granular absorbent material based on a zeolite/vermiculite composite. The composite prepared addresses a number of important issues relating to the use of zeolites in environmental and waste management applications. The material prepared has large particle size due to binderless adhesion of zeolite crystals within the protective lamellar matrix provided by the vermiculite granule. Additionally, the porous nature of new material ensures that it outperforms natural zeolite grains in ion-exchange tests. The material was shown to have a low bulk density (0.75 g cm(-3)) adding the benefit that the majority of grains float on water for over 15 h. The conclusion of the study is that the use of composite matrices enable the preparation of materials which show the physical properties of the host, (e.g., granular and low density), whilst maintaining the powder-like properties (e.g., high ion-exchange and small crystal size) of the active component. The resulting material can be easily handled and separated from aqueous waste streams using either flotation or exploiting its granular nature.     

Biodegradation of heavy crude oil Maya using spent compost and sugar cane bagasse wastes

Experiments were carried out to evaluate the use of some agroindustrial wastes as supports in solid state cultures for the biodegradation of crude oil Maya in static column reactors over 15-20 days periods. Spent compost and cane bagasse wastes showed superior qualities over peat moss waste as support candidates with the advantage that they contain appreciable densities of autochthonous microorganisms in the order of 10(2) cfu g(-1). Mercuric chloride (2%) was able to completely inhibit growth of these microfloras. Biodegradation was enhanced in the presence of the IMP consortium and highest when microflora from cane bagasse only was the bioaugmentation partner (180.7 mg kg(-1) day(-1)). Combination of these waste materials (3:1 ratio, respectively) was observed to significantly biodegrade the crude oil by approximately 40% in 15 days from an initial concentration of 10,000 mg kg(-1) with a four order of magnitude increase in microbial density during this period. Spent compost and cane bagasse wastes are veritable solid support candidates for use in the biodegradation of crude oil polluted systems.     

Degradation of octylphenol and nonylphenol by ozone - part I: direct reaction

This aqueous reaction between ozone and two alkylphenols (APs), namely octylphenol (OP) and nonylphenol (NP), has been investigated. Both compounds are important endocrine disrupting chemicals, which arise from the biodegradation of alkylphenol ethoxylates and are often found at relatively high concentrations in wastewater effluents. In this paper the results of an experimental study are presented which provide values for the reaction rate constants between molecular ozone and undissociated OP and NP, and overall reaction rate constants for the degradation of the two APs at pH values in the range of 7-9. The kinetic rate constants for OP and NP degradation by molecular ozone were 4.33(+/-0.18) x 10(4) and 3.90(+/-0.10) x 10(4) M(-1) s(-1), and the reaction stoichiometry was similar in both cases and equal to approximately 1.3:1 ([O3]:[AP]). The overall second order reaction rate constants for the two APs increased significantly with increasing pH, which is believed to be mainly due to the increasing influence of indirect radical reaction with increasing pH; this aspect is considered in more detail in a companion paper. A preliminary investigation of the reaction mechanism suggests that an initial product of ozonation is hydroxyl-alkyl phenol.     

Column studies on transport of deicing additive benzotriazole in a sandy aquifer and a zerovalent iron barrier

Benzotriazole (BTA), a chemical with wide industrial applications, is a typical additive in deicer/anti-icer used at airport. To achieve a better understanding of the transport behaviour and environmental fate of BTA, laboratory column studies have been performed on subsoil samples from Oslo Airport, Gardermoen. To explore possibilities for aquifer remediation, BTA behaviour was also studied in a column of granular zerovalent iron (Fe(0)). The subsoil column study demonstrates a very limited retardation of BTA. Consecutive loadings of BTA of the subsoil column showed no change of the break-through curve (BTC) and complete desorption was observed. The sorption behaviour of BTA to metallic iron (Fe(0)) was rather complex. Considerable retardation was observed in the Fe(0) column and repeated BTA loading resulted in an earlier break-through. Between 20% and 50% of the input concentration was retained permanently in the iron (Fe(0)) column. The BTA sorption to metallic iron was found to be enhanced by chloride which lowered the break-through concentration (i.e the C/C(0) plateau). The fraction of BTA remaining in the iron column was found to vary with the flow rate, indicating a time dependant multilayer sorption mechanism. The steady increase in the amount of adsorbed BTA to the iron column during loading corresponds to a rather strong bonding of 4-15 BTA layers to the iron surface. A very slow desorption of BTA was observed; even after flushing with 753 pore volumes of BTA free water, 7.5% of the BTA remained in the column. A geochemical model was developed based on PHREEQC-2 to simulate the sorption and transport of BTA in the tested materials. The BTA sorption was modelled with Freundlich sorption isotherms, as earlier determined in batch experiments. A slight adjustment of the Freundlich parameters was required to fit the observed column break-through. However, our model was not able to simulate the long-term retainment of BTA in the granular iron columns. The simulations confirm the high mobility of BTA in groundwater aquifers and suggest that zerovalent iron could be used to retain a BTA plume, although oxidation of the sorbent might reduce the long-term performance of such a remediation scheme and slow desorption has been observed.     

Estrogenic activity removal of 17beta-estradiol by ozonation and identification of by-products

This work investigated the degradation of a natural estrogen (17beta-estradiol) and the removal of estrogenic activity by the ozonation process in three different pHs (3, 7 and 11). A recombinant yeast assay (YES assay) was employed to determine estrogenic activity of the ozonized samples and of the by-products formed during the ozonation. Ozonation was very efficient for the removal of 17beta-estradiol in aqueous solutions. High removals (>99%) were achieved with low ozone dosages in the three different pHs. Several by-products were formed during the ozonation of 17beta-estradiol. However, only a few compounds could be identified and confirmed. Different by-products are formed at different pHs, which is probably due to different chemical pathways and different oxidants (O(3) and OH radical). The by-products formed at pH 11 were 10epsilon-17beta-dihydroxy-1, 4-estradieno-3-one (DEO) and 2-hydroxyestradiol, which were not formed in pH 3. Only testosterone could be observed in pH 3, whereas at pH 7 all three by-products were found. At pH 7 and 11 the applied ozone dosages were not enough to remove all the estrogenicity from samples, even though the 17beta-estradiol residual concentration for these two pHs was lower than at pH 3. Higher estrogenicity was detected at pH 11. An explanation to this fact may be that oxidation via OH radical forms more by-products with estrogenic activity. Probably, the formation of 2-hydroxyestradiol at pHs 7 and 11 is contributing to the residual estrogenicity of samples ozonized at these pHs. In this work, complete removal of estrogenic activity was only obtained at pH 3.     

Seasonal variations of hydrophobic organic contaminant concentrations in the water-column of the Seine Estuary and their transfer to a planktonic species Eurytemora affinis (Calanoïda, copepoda). Part 1: PCBs and PAHs

Hydrophobic organic contaminants (HOC) (i.e. PAHs and PCBs) were measured in the water column and in Eurytemora affinis samples from the Seine Estuary collected from November 2002 to February 2005. Results showed seasonal variations of both total PCB and PAH levels in the suspended particulate matter (SPM) and in the copepods with maximum levels during winter times. PAH and PCB concentrations in the SPM ranged from 499 to 5819ngg(-1) and from 58 to 463ngg(-1), respectively. Phenanthrene, pyrene and benzo[b+j+k]fluoranthene (B[b+j+k]F) were the predominant PAH compounds in the water column, while CB 101, 118, 153 and 138 were the most abundant PCB congeners. PCBs and PAHs bioaccumulated by E. affinis (EA) varied between 383 and 1785ngg(-1) and 165-3866ngg(-1). CB101, 153, 138 and B[b+j+k] were, respectively, the major compounds of PCB and PAH fingerprints in EA. Thereby, the copepods could reach high accumulation factor (ACF) (91000 for PCBs and 17000 for PAHs). The principal component analyses of contaminant concentrations and environmental parameter datasets distinguished two groups of copepods. The winter time cluster, with high percentage of adult copepods, which bioaccumulated the highest PCB and PAH body-burdens, and the second cluster with juveniles showing the lowest HOC concentrations. Thus, PAH and PCB concentrations in EA exhibited significant correlations with the percentage of adults making up the samples.