近30年来高邮湖(含邵伯湖)自然水域面积变化及其影响因素

湖泊水域面积变化特征反映气候与人类活动对湖泊生态系统结构与功能的影响,对湖泊健康评价与水生态修复有重要指导价值.以1988-2015年8期Landsat TM/ETM+遥感影像为数据源,综合运用目视解译法与比值阈值法提取了研究区高邮湖（含邵伯湖）及其围网养殖区的边界信息,分析了研究区水域面积变化特征及其影响因素.结果表明:①1988-2015年研究区自然水域面积呈现前期持续缩小、近期部分恢复的阶段性变化趋势.其中,1988-2000年自然水域面积缓慢缩减,平均减小速率为4.08 km2/a;2000-2011年迅速缩减,平均减小速率为12 km2/a;2011-2015年迅速增长,自然水域面积增加108 km2;1988年自然水域面积最大（716 km2）,2011年最小（535 km2）,2015年部分恢复（643 km2）.②1988-2015年流域内年均降水量先减后增,年均气温逐渐升高.年均气温升高与自然水域面积变化具有相关性（R2=0.472）;年均降水量则与自然水域面积变化无明显关联（R2=0.118）.③1988年和1992年研究区内未见明显的围网养殖,2000年围网养殖区面积仅为45 km2,2011年最大,达199 km2.2000-2009年和2009-2015年围网养殖区面积平均增长速率分别为15.56和9.00 km2/a;北部湖区围网养殖集中,自然水域面积变化最为显著,东西湖区次之.研究显示,1988年以来,年均气温和围网养殖对高邮湖自然水域产生了显著影响,湖区北部湿地侵占严重,湿地生态屏障功能下降.      

弥散铜镦挤成形过程的数值模拟

通过有限元计算机模拟系统DEFORM对弥散铜粉末体材料镦挤过程进行数值模拟 ,说明了弥散铜的变形特征和致密化过程。其结果与粉末体变形理论一致。通过数值模拟 ,可预测成形载荷和产品组织性能 ,可进行工艺参数的优化     

废旧电子电器产品回收处理体系对比分析

随着人民生活水平的提高以及科学技术的不断发展、进步,电子电器产品已经成为人们工作、生活中必不可少的产品.同时,随着相关技术的不断发展其更新换代的速度也在加快.由于废旧电子电器产品越来越多,且本身含有大量的有害物质和丰富的资源,因此使得废旧电子电器产品有效回收处理成为各国关注的热点问题.西方发达国家经过多年的研究与实践,已经形成了一套相对完善的回收处理体系.文章即通过对国内外废旧电子电器产品回收处理体系的对比分析,总结出值得中国借鉴的国外先进经验,为中国建立有效的废旧电子电器产品回收处理体系提供参考依据.     

富营养化水体中浮游病毒与浮游植物生长的关系

于2005年4～12月对武汉东湖落雁岛和关桥2个池塘进行综合调查,考察浮游病毒丰度和叶绿素a含量的变化,以及水温、pH值、溶解氧量、总氮和总磷等环境因子的变化,分析浮游病毒与浮游植物、环境因子之间的相互关系.结果表明,在营养水平较高的水体中,浮游病毒丰度相应较高,但与营养物浓度变化无显著的相关性.2个采样点浮游病毒的平均丰度分别为2.99×10⁸,4.24×10⁸VLPs/mL(峰值出现在9、10月份).叶绿素a浓度的平均值分别为96.66,166.74μg/L.关桥采样点的浮游病毒丰度与前一个月的叶绿素a浓度呈显著相关(r=0.809,P<0.01),其显著性水平高于与当月叶绿素a浓度的相关性(r=0.634,P<0.05),而浮游病毒丰度与后一个月的叶绿素a浓度不呈显著相关(P>0.05).     

Conventional, microwave, and ultrasound sequential extractions for the fractionation of metals in sediments within the Petrochemical Industry, Serbia

In this paper, the main objective was fractionation of Cd, Cu, Ni, Pb, Zn, Ca, Fe, and K in certificate material and sediment samples gathered from and around the Petrochemical Industry using the conventional, microwave and ultrasonic sequential extraction. Microwave oven and ultrasound bath were used as an energy source for achieving faster extraction. Additional heating and boiling of samples were avoided by using lower power and shorter time for microwave and ultrasound extraction. Precision and accuracy of procedure were evaluated by using certificate material (BCR701). Acceptable accuracy of metals (87.0–111.3 %) was achieved for all three-step sequential of conventional extraction protocol. An accuracy of the fourth step has been verified with two certificate materials: BCR143R and 146R. The range of total extracted metal concentrations from sediments was similar for all three extraction techniques. A significant high percentage of Cd, Cu, and Zn were obtained after extraction of the exchangeable and acid soluble sediment fraction. Principal component analysis of values obtained after determination of risk assessment code using conventional and ultrasound sequential extraction show similarity of these values. Accuracy, recovery, and risk assessment code values imply that ultrasound sequential extraction is a more suitable, accelerated sequential extraction procedure (30 min per extraction step) than microwave extraction in applied conditions.     

含添加剂细水雾抑制瓦斯爆炸有效性试验研究

为进一步提高细水雾的抑爆灭火效能,在建立细水雾抑爆系统试验平台的基础上,选用MgCl2、FeCl2和NaHCO3这3种添加剂,研究细水雾对瓦斯爆炸火焰的抑制效果.结果表明:使用含添加剂细水雾后,体积分数为9.5％的瓦斯的爆炸传播速度从13.8 m/s至少降到2.75 m/s;水雾区火焰长度最多缩短了242 mm;含0.8％FeCl2的细水雾有效性系数为6,有效性最高;从火焰图片剖面像素分布可以看出,火焰的辐射体温度均出现了不同程度的降低.不同添加剂不同程度地提高了细水雾的灭火效能,对瓦斯体积分数接近化学当量比的火焰传播有明显抑制效果.     

苯酚在土壤中吸附的试验研究

采用动态法研究苯酚在不同土壤中的有吸附过程，试验结果表明，土壤的腐殖质含量，ＰＨ值，目数，含水率都对吸附过程产生影响。     

日本低碳物流业崛起之动因分析

日本低碳物流业在本国经济低迷中崛起,其动因在于政策扶持和法律制约并用、产业转型与技术支撑互动、竞争与监督相结合等举措的综合运用。其经验对我国低碳物流业的发展或有一定的参考价值。     

大气中多环芳烃气/粒分配的不确定性分析

于2010年8月10～14日用双层石英膜和双层聚氨酯泡沫（PUF）的方法采集并分析了厦门大学海洋楼顶大气中气态和颗粒态多环芳烃（PAHs）,并采用标准误差传递方法对气/粒分配系数（K_p）的不确定度进行了分析.测量结果显示,低分子量PAHs如萘、 苊、 二氢苊和芴在PUF吸附体系中的穿透能力最强,穿透率接近50％;如考虑第一层石英滤膜对气态萘、 苊和二氢苊的吸附影响,则校正后的K_p值比校正前相应的K_p值低1个数量级以上.采用标准误差传递方法得到PAHs气/粒分配系数K_p的不确定度,介于28.14%～50.37%之间,且表现为易挥发和难挥发性PAHs的K_p值皆具有较高的不确定度,而半挥发性PAHs的K_p值的不确定度则较小.K_p值的不确定度来源分析显示,气态PAHs浓度的不确定度的影响最大（方差贡献均值=77.9％）,其次为颗粒态PAHs浓度的不确定度（方差贡献均值=22.0％）,大气颗粒物浓度的不确定度影响最小（方差贡献均值=0.1％）.因此,选择合适的采样系统以获取更加准确的气态PAHs的浓度,是提高PAHs气/粒分配系数准确度的关键.     

The influence of particle size and concentration combined with pH on coagulation mechanisms

In order to evaluate the influence of particle size and particle concentration on the coagulation process, two kinds of particle suspensions, nanoparticles and microparticles,were employed to investigate the effect of particle size on coagulation mechanisms with varying coagulation parameters. Results showed that it is easier for nanoparticles to cause self-aggregation because of Brownian motion, while interception and sedimentation are the mainly physical processes affecting particle transport for microparticles, so they are more stable and disperse more easily. The particle size distribution and particle concentration had distinct influence on the coagulation mechanisms. Under neutral conditions, as the amount of coagulant increased, the coagulation mechanism for nanoparticles changed from charge neutralization to sweep flocculation and the nanoparticles became destabilized, re-stabilized and again destabilized. For microparticles, although the coagulation mechanism was the same as that of nanoparticles, the increased rate of aluminum hydroxide precipitation exceeded the adsorption of incipiently formed soluble alum species, resulting in the disappearance of the re-stabilization zone. Under acidic conditions, Brownian motion dominates for nanoparticles at low particle concentrations, while sweep flocculation is predominant at high particle concentrations. As for microparticles, charge neutralization and sweep flocculation are the mechanisms for low and high particle concentrations respectively.Under alkaline condition, although the mechanisms for both nano-and microparticles are the same, the morphology of flocs and the kinetics of floc formation are different. At low particle concentrations, nanoparticles have larger growth rate and final size of flocs, while at high particle concentrations, nanoparticles have higher fractal dimension and recovery factors.