漆酶对活性黑KN-B和直接大红染料的脱色性能

利用白腐真菌漆酶对活性黑KN-B和直接大红2种偶氮染料进行脱色实验。考察反应时间、加酶量、pH值、染料浓度、温度对脱色率的影响,研究了ABTS介体以及金属离子存在下的脱色效果,并分析了漆酶脱色的动力学性能以及其对偶氮染料的降解规律。结果表明,活性黑KN-B和直接大红脱色适宜条件为：反应时间为30 min,加酶量8 U/mL,pH=7,染料浓度分别为50 mg/L和80 mg/L,温度40~45℃。ABTS介体对酶促偶氮染料脱色没有明显促进作用。Fe²⁺对漆酶脱色有较强的抑制作用;Cu²⁺对漆酶催化活性黑KN-B促进作用较大,对直接大红影响较小。漆酶对2种染料的脱色反应符合米氏方程,其催化活性黑KN-B和直接大红染料的K_m值分别为114.81 mg/L,317.5 mg/L,v_max值分别为6.57 mg/（L·min）和26.0 mg/（L·min）。     

人工湿地基质的筛选及其对猪场废水厌氧消化液中氨氮吸附性能研究

采用静态吸附实验,对比了岷江砂、沱江砂、青衣江砂、沸石、活性炭对猪场废水厌氧消化液中氨氮的吸附去除效率,基于氨氮去除能力、购买成本与运费的比较,筛选出性价比较高的基质--岷江砂作为四川地区人工湿地的基质处理猪场废水厌氧消化液.吸附实验表明,砂对氨氮的去除率随振荡时间和投加量的增加而增加.通过吸附等温曲线Langmuir...     

Composition analysis and application of degradation products of whole feathers through a large scale of fermentation

Purpose

Feathers are one of the most abundant bioresources. They are discarded as waste in most cases and could cause environmental pollution. On the other hand, keratin constituted by amino acids is the main component of feathers. In this article, we reported on biorefined feathers and integrants and application of degraded products.

Materials and methods

The fermentation of whole chicken feathers with Stenotrophomonas maltophilia DHHJ in a scale-up of a 5-L bioreactor was investigated in this article. The fermentation process was controlled at 0.08 MPa pressure, 2.5 L/min airflow, and 300 rpm as 100% oxygen saturation level, 40°C, and pH 7.8.

Results

Feathers were almost completely degraded in the tested fermentation reaction with the following conditions: 80 g of whole feathers in 3 L fermentation broth for 72 h, seed age of 16 h, 100 mL inoculation amount, and 50% oxygen saturation level. The degraded products contain 397.1 mg/L soluble protein that has mass weight ranging from 10 to 160 kD, 336.9 mg/L amino acids, and many kinds of metal ions. The fermentation broth was evaluated as leaf fertilizer and found to increase plant growth to 82% or 66% for two- or fourfold dilutions, respectively. In addition, in a hair care assay, the broth showed a hair protective function by increasing weight, flexibility, and strength of the treated hair.

Conclusions

The whole feathers were degraded completely by S. maltophilia DHHJ. The degraded product includes many factors to life, such as peptides, amino acids, and mineral elements. It could be applied as leaf fertilizer and hair care product.     

三元复合驱采出水中悬浮固体的控制方法

采用向三元复合驱采出水中加入水质稳定剂的方法有效降低采出水中悬浮固体的质量浓度。实验结果表明,将100 g采出水依次经滤纸和孔径为0.45μm的醋酸纤维素膜过滤后,加入1.0 g WSBL-3型水质稳定剂,混合均匀后置于80℃的水浴中静置4 h,取出后再置于40℃的水浴中静置5 min,由此可将采出水中的悬浮固体质量浓度由107 mg/L降至2 mg/L。     

纳米铁催化分解高氯酸盐废水的反应动力学

通过实验考察了酸性条件下纳米铁催化分解高氯酸盐过程中的影响因素,对其分解的动力学进行了研究,并对纳米铁催化剂结构及微观形貌进行SEM、EDS和XRD表征分析。利用阿仑尼乌斯方程和幂指数方程拟合反应动力学方程,获得了高氯酸盐分解动力学方程Ct=C0exp{-0.03773exp(-201.65/T)[H]0.191t},理论的计算值与实验值吻合较好,误差在15%以内。     

直埋式光纤传感钻孔注浆耦合材料配合比试验研究

采用钻孔埋设传感光纤是岩土体分布式光纤传感直埋技术的一种,为使传感光纤与周围土体变形协调,通常在钻孔内注浆,使传感光纤与周围岩土介质凝固为一体。根据对浆液凝固时间无特定要求和有特定要求的2种情况,通过试验研究了钻孔注浆耦合材料、配合比及其凝固后强度。结果表明:通过调整水泥与膨润土的比例以及水固比可以控制凝固体的无侧限抗压强度,使其强度与原位岩土体的近似相同;添加适量的水玻璃可以加快浆液的凝固速度。针对石家庄某隧道原位土体的力学参数,得到了满足现场施工要求的最优配合比,使浆液凝固后的力学指标与原位土体的近似相同。     

高速铁路影响下的长三角城市群可达性空间格局演变

交通网络体系对城市群空间结构的优化有重要作用,随着“高铁时代”的到来,长三角城市群区域空间结构也将发生深远的变化。引入可达性的概念,以现状2010年与规划2020年的长三角综合交通设施网络为基础,选取长三角各城市之间加权平均最短旅行时间为度量指标,分析了高速铁路系统的发展对长三角区域空间格局未来演化的影响,揭示了高速铁路将全面提升长三角区域可达性水平,大大缩短城市之间的时空距离,推动长三角一体化发展,并通过都市圈、经济轴带的形成与发展,促进区域均衡化空间结构的形成。另一方面,虽然高速铁路将推动多中心空间结构的形成,但对城市可达性水平的影响具有明显的区域差异,城市在新的高铁格局下应探析符合自身特点的发展战略     

基于GIS与RUSLE的武陵山区小流域土壤侵蚀评价研究

以长江中下游武陵山区女儿寨小流域为研究区,基于数据观测积累及实地调查采样等方法,计算了研究区降雨侵蚀力、土壤可蚀性等因子,运用GIS与RUSLE评价了流域土壤侵蚀强度并分析了其与土地利用方式、海拔高度的关系。结果表明,流域平均土壤侵蚀强度为78844 t/（km2·a）,属微度侵蚀,流域面积9518%的范围发生轻度以下的侵蚀,强烈以上侵蚀仅占1.19%。从土地利用类型来看,耕地、果园侵蚀强度较大,均达到中度侵蚀,有林地除竹林地为轻度侵蚀外均属微度侵蚀,耕地、果园、竹林地是今后水土流失防治的主要地类。不同海拔高度中,低海拔（200～400 m）区域侵蚀量占到流域侵蚀总量的6442%,是水土流失防治的重点地带。研究为应用修正通用土壤流失方程在武陵山区进行土壤侵蚀评价提供范例,为研究区防治土壤侵蚀和流域管理规划决策提供相应参考     

基于地形分区的射线跟踪法加速方法的研究

通过分析影响射线跟踪法计算效率的因素,提出一种基于多线程的用于开放地理环境中的射线跟踪加速方法,以提高射线跟踪法在计算机仿真中的计算效率。该方法应用于特定复杂战场电磁环境,根据电磁波射线传播特性,采用对地形分区的途径减少射线与规则三角面地形面的求交次数,同时使用多线程追踪单个辐射源的射线路径。经过对方法进行仿真计算,验证该方法的有效性。     

NOx Reduction in a Gas Fired Utility Boiler by Combustion Modifications

Data on the effect of several combustion modifications on the formation of nitrogen oxides and on boiler efficiency were acquired and analyzed for a 110 MW gas fired utility boiler. The results from the study showed that decreasing the oxygen in the flue gas from 2.2% to 0.6% reduced the NO_x formation by 33% and also gave better boiler efficiencies. Flue gas recirculation through the bottom of the firebox was found to be ineffective. Staged combustion was found to reduce the NO_x emissions by as much as 55 % while decreasing the efficiency by about 5%. Adjustment of the burner air registers reduced the NO_x formation by about 20 ppm. The lowest NO_x emissions of 42 ppm (at about 3% O₂) in the stack was obtained for air only to one top burner and 0.5% oxygen in the flue gas.