Occurence and Distribution of Polycyclic Aromatic Hydrocarbons in Ankara Precipitation

Urban atmospheric environment contains many trace organic pollutants that are related to the incomplete fuel combustion in domestic heating, industrial plants and automobile traffic. Removal of these pollutants from the atmosphere takes place through wet and dry deposition as well as chemical transformations. In this study, concentrations of polycyclic aromatic hydrocarbons (PAHs) in wet deposition samples were determined at an urban site of Turkey. Wet and dry deposition samples were collected using Andersen Rain Sampler. The sampler was modified accordingly for the collection of organic pollutants. Collected samples were preconcentrated by using solid phase extraction (SPE) disks and consecutively analyzed by Gas Chromatography-Mass Spectrometry (GC-MS). Among the 13 compounds quantified in this study, anthracene, fluoranthene, and pyrene were found more frequently and at elevated concentrations (202, 271 and 260 ng L^-1 mean concentrations, respectively).Concentrations of PAHs were found to be high in winter period.     

DENSITY CURRENT INTRUSIONS IN AN ICE-COVERED URBAN LAKE1

ABSTRACT: Evidence is presented that snowmelt runoff from an urban watershed can produce density current intrusions (underflows) in a lake. Several episodes of density current intrusions are documented. Water temperatures and salinities measured near the bottom of a 10 m deep Minneapolis lake during the late winter warming periods in 1989, 1990, 1991, and 1995 show significant rapid changes which are correlated with observed higher air temperatures and snowmelt runoff. The snowmelt runoff entering this particular lake (Ryan Lake) has increased electrical conductivity, salinity, and density. The source of the salinity is the salt spread on urban streets in the winter. Heating of littoral waters in spring may also contribute to the occurrence of the sinking flows, but is clearly not the only cause.     

Laboratory scale studies on gaseous emissions generated by the incineration of an artificial automotive shredder residue presenting a critical composition

Car manufacturers must eliminate automotive shredder residues (ASR). Two ways of incineration are of interest: at 850°C in municipal waste incinerators or at higher temperatures, above 1100°C in cement plants. These processes reduce the mass and the volume of waste to be disposed of in landfills and energy recovery might be possible. Regulations govern the emission of gaseous effluents to control environmental risk. To determine gaseous effluents from a pilot sacle or an industrial incineration plant, an artificial ASR was made by mixing three representative organic polymers present in the real ASR, namely polyvinylchloride, polyurethane and rubber. This mixture was incinerated at 850 and 1100°C in laboratory experiments and the analyses of the principal gaseous effluents such as carbon oxides, nitrogen oxides, volatile organic compounds, hydrochloric and hydrocyanic acids and sulphur compounds are presented and discussed. Lastly, in order to simulate artificial ASR behaviour, the composition of the combustion gases at equilibrium was calculated using a Gibbs energy minimisation code.     

Remediation of acid mine drainage leachate by a physicochemical and biological treatment‐train approach

Biological and physicochemical approaches were utilized in a treatment train for acid mine dis charge (AMD) waters. Anaerobic bioreactors, chemical precipitation reactors, and biopolymer chelation reactors, operated in static, semicontinuous, and continuous flow modes, removed significant quantities of metals and sulfates associated with AMD water. Static tests indicated accept able copper removal via precipitation by generation of hydrogen sulfide in anaerobic reactors. However, low pH affected the biopolymer coating in the chelation reactor, resulting in loss of bed surface. Corrections of AMD to pH > 7 resulted in some metal precipitationprior to biopolymer treatment. A series of static semicontinuous tests at pH 5.0 provided improved metal and sulfate removal. Copper (Cu⁺) was reduced to trace concentrations, while manganese (Mn⁺), although reduced, proved to be the most recalcitrant of the metals. © 2006 Wiley Periodicals, Inc.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

The Transit of 35SO4 2- and 3H2O Added In Situ to Soil in a Boreal Coniferous Forest

A solution containing ³⁵SO₄ ^2- and ³H₂O was applied to four plots (5 × 5 m) in a boreal coniferous forest in the Laflamme Lake watershed, Québec, under two contrasting conditions: in summer (plots 1 and 2), and on the snowpack before snowmelt (plots 3 and 4). The transit of both these tracers in the soil solution was then followed through a network of soil lysimeters located at different depths. Four months after the summer application, ³H₂O had infiltrated the whole soil profile at plot 1, while ³⁵SO₄ ^2- was only observed in the LFH and Bhf horizons. A ³⁵SO₄ ^2- budget calculated from mid-August to November indicated that 89 and 10.6% of the added ³⁵SO₄ ^2- was retained within the LFH and the Bhf layers, respectively. Fifteen months later, the added ³⁵SO₄ ^2- was distributed in the following proportions within the soil horizons: LFH (73.7%), Bhf (11.8%) and Bf (12.8%), for a total retention rate of 98.3%. The superficial penetration of ³H₂O at plot 2 was indicative of a major lateral water movement that prevented the calculation of a ³⁵SO₄ ^2- budget. This situation also was observed at plot 4 during snowmelt. At plot 3, ³H₂O moved freely through the soil profile and a significant fraction of the added ³⁵SO₄ ^2- reached the B horizons, where it was presumably adsorbed on aluminum (Al) and ferric (Fe) oxides. The ³⁵SO₄ ^2- budget for plot 3 from March to November indicated that 87% of the added ³⁵SO₄ ^2- was retained within the soil profile, with most being retained in the B horizons (LFH = 33.1%, Bhf = 33.1%, Bf = 20.8%). The contrasting retention patterns of ³⁵SO₄ ^2- within the soil profile following the summer addition and snowmelt likely was caused by the contrastingsoil temperatures and soil solution residence times within the differentsoil layers. The persistence of ³⁵SO₄ ^2- in the soil solution of the entire profile long after the initial tracer infiltration, and the relative temporal stability of specific activity of SO₄ ^2-, point to the establishment of an isotopic equilibrium between the added ³⁵SO₄ and the active S-containing reservoirs within a given soil horizon. Overall, the results clearly illustrate the very strong potential for ³⁵SO₄ ^2- retention and recycling in forest soils.     

TEMPORAL CHANGES IN THE YADKIN RIVER FLOW VERSUS SUSPENDED SEDIMENT CONCENTRATION RELATIONSHIP1

ABSTRACT: Dynamic linear models (DLM) and seasonal trend decomposition (STL) using local regression, or LOESS, were used to analyze the 50‐year time series of suspended sediment concentrations for the Yadkin River, measured at the U.S. Geological Survey station at Yadkin College, North Carolina. A DLM with constant trend, seasonality, and a log₁₀ streamflow regressor provided the best model to predict monthly mean log₁₀ suspended sediment concentrations, based on the forecast log likelihood. Using DLM, there was evidence (odds approximately 69:1) that the log₁₀ streamflow versus log₁₀ suspended sediment concentration relationship has changed, with an approximate 20 percent increase in the log₁₀ streamflow coefficient over the period 1981 to 1996. However, sediment concentrations in the Yadkin River have decreased during the decade of the 1990s, which has been accompanied by a concomitant increase in streamflow variability. Although STL has been shown to be a versatile trend analysis technique, DLM is shown to be more suitable for discovery and inference of structural changes (trends) in the model coefficient describing the relationship between flow and sediment concentration.     

Unreliability of co‐occurrence‐based sediment quality guidelines for contaminated sediment evaluations at Superfund/hazardous chemical sites

Many Superfund/hazardous chemical sites include waterbodies whose sediments contain hazardous chemicals. With the need to assess, rank, and remediate contaminated sediments at such sites, as well as in other waterways, regulators seek a simple, quantitative assessment approach that feeds easily into a decision‐making scheme. Numeric, co‐occurrence‐based “sediment quality guidelines” have emerged with the appearance of administrative simplicity. However, the very foundation of the co‐occurrence approach, based on the total concentrations of a chemical(s) in sediment, is technically invalid; its application relies on additional technically invalid presumptions. Use of technically invalid evaluation approaches renders any assessment of the significance of sediment contamination unreliable. This article reviews the technical roots and assumptions of the co‐occurrence‐based SQGs, the fundamental flaws in the rationale behind their development and application, and their misapplication for sediment quality evaluation. It also reviews concepts and approaches for the more reliable evaluation, ranking, and cleanup assessment of contaminated sediments at Superfund sites and elsewhere. © 2005 Wiley Periodicals, Inc.     

Tillage erosion and its effect on soil properties and crop yield in Denmark

Tillage erosion had been identified as a major process of soil redistribution on sloping arable land. The objectives of our study were to investigate the extent of tillage erosion and its effect on soil quality and productivity under Danish conditions. Soil samples were collected to a 0.45-m depth on a regular grid from a 1.9-ha site and analyzed for 137Cs inventories, as a measure of soil redistribution, soil texture, soil organic carbon (SOC) contents, and phosphorus (P) contents. Grain yield was determined at the same sampling points. Substantial soil redistribution had occurred during the past decades, mainly due to tillage. Average tillage erosion rates of 2.7 kg m(-2) yr(-1) occurred on the shoulderslopes, while deposition amounted to 1.2 kg m(-2) yr(-1) on foot- and toeslopes. The pattern of soil redistribution could not be explained by water erosion. Soil organic carbon and P contents in soil profiles increased from the shoulder- toward the toeslopes. Tillage translocation rates were strongly correlated with SOC contents, A-horizon depth, and P contents. Thus, tillage erosion had led to truncated soils on shoulderslopes and deep, colluvial soils on the foot- and toeslopes, substantially affecting within-field variability of soil properties. We concluded that tillage erosion has important implications for SOC dynamics on hummocky land and increases the risk for nutrient losses by overland flow and leaching. Despite the occurrence of deep soils across the study area, evidence suggested that crop productivity was affected by tillage-induced soil redistribution. However, tillage erosion effects on crop yield were confounded by topography-yield relationships.